Linux за българи: Форуми

Linux секция за начинаещи => Настройка на хардуер => Темата е започната от: Ekspert в Jun 06, 2005, 09:39



Титла: TVOut
Публикувано от: Ekspert в Jun 06, 2005, 09:39
Хора, помогнете ако някой знае как да подкарам TV-то. От половин година се мъча да оправя този TVOut и под SuSE 9.1/3 и под Ubuntu 5.04 изчетох всичко из форума и пак не мога да се оправя. Лошото е че не знам английски и не разбирам нищо от това дето го пише из страниците на Убунту. По долу е конфига който е в /etc/X11 ,но и идея си нямам вече какво да добавя.Знам че нещо трябва да допиша но какво и къде вече не знам. Прегледах и форума на Убунту тук
но почти нищо не разбрах (все този английски).
Ако на някой му се занимава да редактира този конфиг ще съм много благодарен.Ето и конфига:

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands:
#
#   cp /etc/X11/xorg.conf /etc/X11/xorg.conf.custom
#   sudo sh -c 'md5sum /etc/X11/xorg.conf >/var/lib/xfree86/xorg.conf.md5sum'
#   sudo dpkg-reconfigure xserver-xorg

Section "Files"
   FontPath   "unix/:7100"         # local font server
   # if the local font server has problems, we can fall back on these
   FontPath   "/usr/lib/X11/fonts/misc"
   FontPath   "/usr/lib/X11/fonts/cyrillic"
   FontPath   "/usr/lib/X11/fonts/100dpi/:unscaled"
   FontPath   "/usr/lib/X11/fonts/75dpi/:unscaled"
   FontPath   "/usr/lib/X11/fonts/Type1"
   FontPath   "/usr/lib/X11/fonts/CID"
   FontPath   "/usr/lib/X11/fonts/100dpi"
   FontPath   "/usr/lib/X11/fonts/75dpi"
        # paths to defoma fonts
   FontPath   "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
   FontPath   "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection

Section "Module"
   Load   "bitmap"
   Load   "dbe"
   Load   "ddc"
   Load   "dri"
   Load   "extmod"
   Load   "freetype"
   Load   "glx"
   Load   "int10"
   Load   "record"
   Load   "type1"
   Load   "vbe"
EndSection

Section "InputDevice"
   Identifier   "Generic Keyboard"
   Driver      "keyboard"
   Option      "CoreKeyboard"
   Option      "XkbRules"   "xorg"
   Option      "XkbModel"   "pc105"
   Option      "XkbLayout"   "us,bg(phonetic),bg(bds)"
   Option      "XkbOptions"   "grp:ctrl_shift_toggle"
EndSection

Section "InputDevice"
   Identifier   "Configured Mouse"
   Driver      "mouse"
   Option      "CorePointer"
   Option      "Device"      "/dev/input/mice"
   Option      "Protocol"      "ImPS/2"
   Option      "Emulate3Buttons"   "true"
   Option      "ZAxisMapping"      "4 5"
EndSection

Section "Device"
   Identifier   "NVIDIA Corporation NV31 [GeForce FX 5600]"
   Driver      "nvidia"
   BusID      "PCI:2:0:0"
EndSection

Section "Monitor"
   Identifier   "PHILIPS 107E"
   Option      "DPMS"
EndSection

Section "Screen"
   Identifier   "Default Screen"
   Device      "NVIDIA Corporation NV31 [GeForce FX 5600]"
   Monitor      "PHILIPS 107E"
   DefaultDepth   24
   SubSection "Display"
      Depth      1
      Modes      "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
   EndSubSection
   SubSection "Display"
      Depth      4
      Modes      "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
   EndSubSection
   SubSection "Display"
      Depth      8
      Modes      "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
   EndSubSection
   SubSection "Display"
      Depth      15
      Modes      "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
   EndSubSection
   SubSection "Display"
      Depth      16
      Modes      "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
   EndSubSection
   SubSection "Display"
      Depth      24
      Modes      "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
   EndSubSection
EndSection

Section "ServerLayout"
 Identifier "Default Layout"
 Screen  "Default Screen"
 InputDevice "Generic Keyboard"
 InputDevice "Configured Mouse"
EndSection

Section "DRI"
 Mode 0666
EndSection


Благодаря


Титла: TVOut
Публикувано от: vENZi в Jun 06, 2005, 12:51
moga da ti pratia conf-a za cloniran ekran deto si go polzvam u home no sega sym na work :(


Титла: TVOut
Публикувано от: JOKe в Jun 06, 2005, 14:40
а знаете ли как става аz clone съм го пуснал има няква моятема тука по форума бая стара за Nvidia + TV аут и някои беше отговорил обаче знаете ли как да си направя Clone но в X-a да е в разделителна 1024х768 а на ТВ-то да е в 800х600 и изобщо визможно ли е


Титла: TVOut
Публикувано от: stekum в Jun 07, 2005, 20:46
Цитат (vENZi @ Юни 06 2005,13:51)
moga da ti pratia conf-a za cloniran ekran deto si go polzvam u home no sega sym na work :(

Ако не те затруднява прати го и на мен

stekum@mail.bg


Титла: TVOut
Публикувано от: philip в Jun 07, 2005, 22:44
#малко не по темата
Цитат (Ekspert @ Юни 06 2005,09:39)
Лошото е че не знам английски и не разбирам нищо от това дето го пише из страниците на Убунту.

Е направи нещо по въпроса, срамота е.


Титла: TVOut
Публикувано от: PhobosK в Jun 08, 2005, 00:08
Примерен код

Section "Files"
 FontPath "unix/:7100"

 FontPath "/usr/lib/X11/fonts/misc"
 FontPath "/usr/lib/X11/fonts/cyrillic"
 FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
 FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
 FontPath "/usr/lib/X11/fonts/Type1"
 FontPath "/usr/lib/X11/fonts/CID"
 FontPath "/usr/lib/X11/fonts/100dpi"
 FontPath "/usr/lib/X11/fonts/75dpi"

 FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
 FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection

Section "Module"
    Load "dbe"
    Load "v4l"
    Load "extmod"
    Load "type1"
    Load "freetype"
    Load "glx"
EndSection

Section "InputDevice"
 Identifier "Generic Keyboard"
 Driver "keyboard"
 Option "CoreKeyboard"
 Option "XkbRules" "xorg"
 Option "XkbModel" "pc105"
 Option "XkbLayout" "us,bg(phonetic),bg(bds)"
 Option "XkbOptions" "grp:ctrl_shift_toggle"
EndSection

Section "InputDevice"
 Identifier "Configured Mouse"
 Driver "mouse"
 Option "CorePointer"
 Option "Device" "/dev/input/mice"
 Option "Protocol" "ImPS/2"
 Option "Emulate3Buttons" "true"
 Option "ZAxisMapping" "4 5"
EndSection

Section "Device"
 Identifier "NVIDIA Corporation NV31 [GeForce FX 5600]"
 Driver "nvidia"
 Option "DPMS"
 Option "RandRRotation" "yes"
 Option "UseEdidFreqs" "yes"
 Option "ConnectedMonitor" "CRT,TV"
 Option "IgnoreDisplayDevices" "DFP"
        
 Option "MetaModes" "1024x768,1024x768;1024x768,NULL;800x600,NULL;640x480,NULL"
    
 Option "TwinView" "true"
 Option "TwinViewOrientation" "RightOf"
#Option "TwinViewOrientation" "Clone"

# PROVERI DOKUMENTACIATA NA TV-TO ZA TEZI STOJNOSTI
# I GI PROMENI AKO TRIABVA !
 Option "SecondMonitorHorizSync" "30-50"
 Option "SecondMonitorVertRefresh" "60"
    
 Option "TVStandard" "PAL-B"
 Option "TVOutFormat" "SVideo"
EndSection

Section "Monitor"
 Identifier "monitor1"
 VendorName "Philips 107E"
 ModelName "PHILIPS 107E"
 Option "DPMS"

# PROVERI DOKUMENTACIATA NA MONITORA ZA TEZI STOJNOSTI
# I GI PROMENI AKO TRIABVA !
 HorizSync 30-71
 VertRefresh 50-160

EndSection

Section "Screen"
 Identifier "Default Screen"
 Device "NVIDIA Corporation NV31 [GeForce FX 5600]"
 Monitor "monitor1"
 DefaultDepth 24
 
 SubSection "Display"
 Depth 8
 EndSubSection
 
 SubSection "Display"
 Depth 15
 EndSubSection
 
 SubSection "Display"
 Depth 16
 EndSubSection
 
 SubSection "Display"
 Depth 24
 EndSubSection
EndSection

Section "ServerLayout"
 Identifier "Default Layout"
 Screen  "Default Screen"
 InputDevice "Generic Keyboard"
 InputDevice "Configured Mouse"
EndSection


Пробвай с този конфигурационен файл. Той ще ти осигури 4 режима:
1. CRT-1024x768 TV-1024x768
2. CRT-1024x768 TV-NULL(изключен)
3. CRT-800x600 TV-NULL(изключен)
4. CRT-640x480 TV-NULL(изключен)
TV е вдясно от CRT, а ако искаш да са клонирани махни коментара за clone и сложи коментар на rightof. Освен това погледни и другите коментари.


Титла: TVOut
Публикувано от: в Jun 08, 2005, 02:43
Много благодаря за конфига, ще го пробвам утре и ще пиша, а колкото до английския, това ми е много болна тема, много трудно уча езици, за моите почти 40 години успях да науча само Руски и то не много добре.