По принцип е възможно, но до колко е скапан!? Стартира ли изобщо? Зад рутер ли е!? До колко му стига багажа с обяснения по телефон или друг начин да пипне тук и там по компа за да направи някакви настройки които да ти дадат достъп!?

Има достъп до интернет.Всъщност проблема е,че си е изтрил долната лента и менюто горе в ляво:Aplicationes Places System

Здравейте колеги.Имам един въпрос,баща ми си е скапал компютъра и трябва да го погледна,проблема е че сме на разстояние.И двамата сме с Убунту,има ли някакъв начин да вляза в неговия компютър и да погледна какво е направил.Благодаря.

...изтрито...

Добре де мъча се да си инсталирам драйвера,какво лошо има.Защо да е малоумна темата

root@bt:~# cat /var/log/nvidia-installer.log
nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Sat Oct 29 18:09:37 2011
installer version: 1.0.7

option status:
  license pre-accepted    : false
  update                  : false
  force update            : false
  expert                  : false
  uninstall               : false
  driver info             : false
  precompiled interfaces  : true
  no ncurses color        : false
  query latest version    : false
  OpenGL header files     : true
  no questions            : false
  silent                  : false
  no recursion            : false
  no backup               : false
  kernel module only      : false
  sanity                  : false
  add this kernel         : false
  no runlevel check       : false
  no network              : false
  no ABI note             : false
  no RPMs                 : false
  no kernel module        : false
  force SELinux           : default
  no X server check       : true
  no cc version check     : false
  force tls               : (not specified)
  X install prefix        : (not specified)
  X library install path  : (not specified)
  X module install path   : (not specified)
  OpenGL install prefix   : (not specified)
  OpenGL install libdir   : (not specified)
  utility install prefix  : (not specified)
  utility install libdir  : (not specified)
  doc install prefix      : (not specified)
  kernel name             : (not specified)
  kernel include path     : (not specified)
  kernel source path      : (not specified)
  kernel output path      : (not specified)
  kernel install path     : (not specified)
  proc mount point        : /proc
  ui                      : (not specified)
  tmpdir                  : /tmp
  ftp mirror              : ftp://download.nvidia.com
  RPM file list           : (not specified)

Using: nvidia-installer ncurses user interface
-> The file '/tmp/.X0-lock' exists and appears to contain the process ID '1284'
   of a runnning X server.
-> Continuing per the '--no-x-check' option.
-> License accepted.
-> Installing NVIDIA driver version 190.53.
-> Running distribution scripts
   executing: '/usr/lib/nvidia/pre-install'...
-> done.
-> The distribution-provided pre-install script failed!  Continue installation
   anyway? (Answer: Yes)
-> Performing CC sanity check with CC="cc".
-> Performing CC version check with CC="cc".
-> Kernel source path: '/usr/src/linux'
-> Kernel output path: '/usr/src/linux'
-> Performing rivafb check.
-> Performing nvidiafb check.
-> Performing Xen check.
-> Cleaning kernel module build directory.
   executing: 'cd ./usr/src/nv; make clean'...
-> Building kernel module:
   executing: 'cd ./usr/src/nv; make module SYSSRC=/usr/src/linux SYSOUT=/usr/s
   rc/linux'...
   NVIDIA: calling KBUILD...
   make CC=cc  KBUILD_VERBOSE=1 -C /usr/src/linux SUBDIRS=/tmp/selfgz13982/NVID
   IA-Linux-x86-190.53-pkg1/usr/src/nv modules
   test -e include/generated/autoconf.h -a -e include/config/auto.conf || (   \
      echo;                        \
      echo "  ERROR: Kernel configuration is invalid.";      \
      echo "         include/generated/autoconf.h or include/config/auto.conf are
   missing.";\
      echo "         Run 'make oldconfig && make prepare' on kernel src to fix it
   .";   \
      echo;                        \
      /bin/false)
   mkdir -p /tmp/selfgz13982/NVIDIA-Linux-x86-190.53-pkg1/usr/src/nv/.tmp_versi
   ons ; rm -f /tmp/selfgz13982/NVIDIA-Linux-x86-190.53-pkg1/usr/src/nv/.tmp_ve
   rsions/*
   
     WARNING: Symbol version dump /usr/src/linux-source-2.6.38/Module.symvers
              is missing; modules will have no dependencies and modversions.
   
   make -f scripts/Makefile.build obj=/tmp/selfgz13982/NVIDIA-Linux-x86-190.53-
   pkg1/usr/src/nv
     cc -Wp,-MD,/tmp/selfgz13982/NVIDIA-Linux-x86-190.53-pkg1/usr/src/nv/.nv.o.
   d  -nostdinc -isystem /usr/lib/gcc/i486-linux-gnu/4.4.3/include -I/usr/src/l
   inux-source-2.6.38/arch/x86/include -Iinclude  -include include/generated/au
   toconf.h -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-
   strict-aliasing -fno-common -Werror-implicit-function-declaration -Wno-forma
   t-security -fno-delete-null-pointer-checks -O2 -m32 -msoft-float -mregparm=3
   -freg-struct-return -mpreferred-stack-boundary=2 -march=i486 -maccumulate-ou
   tgoing-args -Wa,-mtune=generic32 -ffreestanding -fstack-protector -DCONFIG_A
   S_CFI=1 -DCONFIG_AS_CFI_SIGNAL_FRAME=1 -DCONFIG_AS_CFI_SECTIONS=1 -pipe -Wno
   -sign-compare -fno-asynchronous-unwind-tables -mno-sse -mno-mmx -mno-sse2 -m
   no-3dnow -Wframe-larger-than=1024 -fno-omit-frame-pointer -fno-optimize-sibl
   ing-calls -pg -Wdeclaration-after-statement -Wno-pointer-sign -fno-strict-ov
   erflow -fconserve-stack -I/tmp/selfgz13982/NVIDIA-Linux-x86-190.53-pkg1/usr/
   src/nv -Wall -Wimplicit -Wreturn-type -Wswitch -Wformat -Wchar-subscripts -W
   parentheses -Wpointer-arith -Wno-multichar -Werror -fno-defer-pop -MD -Wsign
   -compare -
   Wno-cast-qual -Wno-error -D__KERNEL__ -DMODULE -DNVRM -DNV_VERSION_STRING=\"
   190.53\" -UDEBUG -U_DEBUG -DNDEBUG  -DMODULE  -D"KBUILD_STR(s)=#s" -D"KBUILD
   _BASENAME=KBUILD_STR(nv)"  -D"KBUILD_MODNAME=KBUILD_STR(nvidia)" -c -o /tmp/
   selfgz13982/NVIDIA-Linux-x86-190.53-pkg1/usr/src/nv/nv.o /tmp/selfgz13982/NV
   IDIA-Linux-x86-190.53-pkg1/usr/src/nv/nv.c
   In file included from include/linux/bitops.h:22,
                    from include/linux/kernel.h:17,
                    from include/linux/sched.h:55,
                    from include/linux/utsname.h:35,
                    from /tmp/selfgz13982/NVIDIA-Linux-x86-190.53-pkg1/usr/src/
   nv/nv-linux.h:21,
                    from /tmp/selfgz13982/NVIDIA-Linux-x86-190.53-pkg1/usr/src/
   nv/nv.c:14:
   /usr/src/linux-source-2.6.38/arch/x86/include/asm/bitops.h: In function ‘s
   et_bit’:
   /usr/src/linux-source-2.6.38/arch/x86/include/asm/bitops.h:64: warning: poin
   ter of type ‘void *’ used in arithmetic
   /usr/src/linux-source-2.6.38/arch/x86/include/asm/bitops.h: In function ‘c
   lear_bit’:
   /usr/src/linux-source-2.6.38/arch/x86/include/asm/bitops.h:102: warning: poi
   nter of type ‘void *’ used in arithmetic
   /usr/src/linux-source-2.6.38/arch/x86/include/asm/bitops.h: In function ‘c
   hange_bit’:
   /usr/src/linux-source-2.6.38/arch/x86/include/asm/bitops.h:178: warning: poi
   nter of type ‘void *’ used in arithmetic
   In file included from include/linux/kernel.h:17,
                    from include/linux/sched.h:55,
                    from include/linux/utsname.h:35,
                    from /tmp/selfgz13982/NVIDIA-Linux-x86-190.53-pkg1/usr/src/
   nv/nv-linux.h:21,
                    from /tmp/selfgz13982/NVIDIA-Linux-x86-190.53-pkg1/usr/src/
   nv/nv.c:14:
   include/linux/bitops.h: In function ‘hweight_long’:
   include/linux/bitops.h:49: warning: signed and unsigned type in conditional
   expression
   In file included from include/linux/list.h:7,
                    from include/linux/preempt.h:11,
                    from include/linux/spinlock.h:50,
                    from include/linux/seqlock.h:29,
                    from include/linux/time.h:8,
                    from include/linux/timex.h:56,
                    from include/linux/sched.h:57,
                    from include/linux/utsname.h:35,
                    from /tmp/selfgz13982/NVIDIA-Linux-x86-190.53-pkg1/usr/src/
   nv/nv-linux.h:21,
                    from /tmp/selfgz13982/NVIDIA-Linux-x86-190.53-pkg1/usr/src/
   nv/nv.c:14:
   include/linux/prefetch.h: In function ‘prefetch_range’:
   include/linux/prefetch.h:57: warning: pointer of type ‘void *’ used in a
   rithmetic
   In file included from include/linux/preempt.h:11,
                    from include/linux/spinlock.h:50,
                    from include/linux/seqlock.h:29,
                    from include/linux/time.h:8,
                    from include/linux/timex.h:56,
                    from include/linux/sched.h:57,
                    from include/linux/utsname.h:35,
                    from /tmp/selfgz13982/NVIDIA-Linux-x86-190.53-pkg1/usr/src/
   nv/nv-linux.h:21,
                    from /tmp/selfgz13982/NVIDIA-Linux-x86-190.53-pkg1/usr/src/
   nv/nv.c:14:
   include/linux/list.h: In function ‘list_del’:
   include/linux/list.h:107: warning: pointer of type ‘void *’ used in arit
   hmetic
   include/linux/list.h:108: warning: pointer of type ‘void *’ used in arit
   hmetic
   include/linux/list.h: In function ‘hlist_del’:
   include/linux/list.h:602: warning: pointer of type ‘void *’ used in arit
   hmetic
   include/linux/list.h:603: warning: pointer of type ‘void *’ used in arit
   hmetic
   In file included from include/linux/sched.h:82,
                    from include/linux/utsname.h:35,
                    from /tmp/selfgz13982/NVIDIA-Linux-x86-190.53-pkg1/usr/src/
   nv/nv-linux.h:21,
                    from /tmp/selfgz13982/NVIDIA-Linux-x86-190.53-pkg1/usr/src/
   nv/nv.c:14:
   include/linux/rculist.h: In function ‘list_del_rcu’:
   include/linux/rculist.h:112: warning: pointer of type ‘void *’ used in a
   rithmetic
   include/linux/rculist.h: In function ‘list_replace_rcu’:
   include/linux/rculist.h:158: warning: pointer of type ‘void *’ used in a
   rithmetic
   include/linux/rculist.h: In function ‘hlist_del_rcu’:
   include/linux/rculist.h:312: warning: pointer of type ‘void *’ used in a
   rithmetic
   include/linux/rculist.h: In function ‘hlist_replace_rcu’:
   include/linux/rculist.h:332: warning: pointer of type ‘void *’ used in a
   rithmetic
   In file included from include/linux/utsname.h:35,
                    from /tmp/selfgz13982/NVIDIA-Linux-x86-190.53-pkg1/usr/src/
   nv/nv-linux.h:21,
                    from /tmp/selfgz13982/NVIDIA-Linux-x86-190.53-pkg1/usr/src/
   nv/nv.c:14:
   include/linux/sched.h: In function ‘object_is_on_stack’:
   include/linux/sched.h:2317: warning: pointer of type ‘void *’ used in ar
   ithmetic
   In file included from include/linux/rculist_bl.h:7,
                    from include/linux/dcache.h:7,
                    from include/linux/fs.h:383,
                    from include/linux/poll.h:12,
                    from /tmp/selfgz13982/NVIDIA-Linux-x86-190.53-pkg1/usr/src/
   nv/nv-linux.h:81,
                    from /tmp/selfgz13982/NVIDIA-Linux-x86-190.53-pkg1/usr/src/
   nv/nv.c:14:
   include/linux/list_bl.h: In function ‘hlist_bl_del’:
   include/linux/list_bl.h:105: warning: pointer of type ‘void *’ used in a
   rithmetic
   include/linux/list_bl.h:106: warning: pointer of type ‘void *’ used in a
   rithmetic
   In file included from include/linux/dcache.h:7,
                    from include/linux/fs.h:383,
                    from include/linux/poll.h:12,
                    from /tmp/selfgz13982/NVIDIA-Linux-x86-190.53-pkg1/usr/src/
   nv/nv-linux.h:81,
                    from /tmp/selfgz13982/NVIDIA-Linux-x86-190.53-pkg1/usr/src/
   nv/nv.c:14:
   include/linux/rculist_bl.h: In function ‘hlist_bl_del_rcu’:
   include/linux/rculist_bl.h:76: warning: pointer of type ‘void *’ used in
   arithmetic
   In file included from /usr/src/linux-source-2.6.38/arch/x86/include/asm/uacc
   ess.h:571,
                    from include/linux/poll.h:14,
                    from /tmp/selfgz13982/NVIDIA-Linux-x86-190.53-pkg1/usr/src/
   nv/nv-linux.h:81,
                    from /tmp/selfgz13982/NVIDIA-Linux-x86-190.53-pkg1/usr/src/
   nv/nv.c:14:
   /usr/src/linux-source-2.6.38/arch/x86/include/asm/uaccess_32.h: In function
   ‘copy_from_user’:
   /usr/src/linux-source-2.6.38/arch/x86/include/asm/uaccess_32.h:209: warning:
   comparison between signed and unsigned integer expressions
   In file included from include/linux/io.h:22,
                    from include/linux/pci.h:54,
                    from /tmp/selfgz13982/NVIDIA-Linux-x86-190.53-pkg1/usr/src/
   nv/nv-linux.h:92,
                    from /tmp/selfgz13982/NVIDIA-Linux-x86-190.53-pkg1/usr/src/
   nv/nv.c:14:
   /usr/src/linux-source-2.6.38/arch/x86/include/asm/io.h: In function ‘write
   q’:
   /usr/src/linux-source-2.6.38/arch/x86/include/asm/io.h:106: warning: pointer
   of type ‘void *’ used in arithmetic
   In file included from include/linux/dma-mapping.h:7,
                    from include/asm-generic/pci-dma-compat.h:7,
                    from /usr/src/linux-source-2.6.38/arch/x86/include/asm/pci.
   h:141,
                    from include/linux/pci.h:1243,
                    from /tmp/selfgz13982/NVIDIA-Linux-x86-190.53-pkg1/usr/src/
   nv/nv-linux.h:92,
                    from /tmp/selfgz13982/NVIDIA-Linux-x86-190.53-pkg1/usr/src/
   nv/nv.c:14:
   include/linux/scatterlist.h: In function ‘sg_virt’:
   include/linux/scatterlist.h:199: warning: pointer of type ‘void *’ used
   in arithmetic
   In file included from /usr/src/linux-source-2.6.38/arch/x86/include/asm/dma-
   mapping.h:43,
                    from include/linux/dma-mapping.h:93,
                    from include/asm-generic/pci-dma-compat.h:7,
                    from /usr/src/linux-source-2.6.38/arch/x86/include/asm/pci.
   h:141,
                    from include/linux/pci.h:1243,
                    from /tmp/selfgz13982/NVIDIA-Linux-x86-190.53-pkg1/usr/src/
   nv/nv-linux.h:92,
                    from /tmp/selfgz13982/NVIDIA-Linux-x86-190.53-pkg1/usr/src/
   nv/nv.c:14:
   include/asm-generic/dma-mapping-common.h: In function ‘dma_map_page’:
   include/asm-generic/dma-mapping-common.h:77: warning: pointer of type ‘voi
   d *’ used in arithmetic
   In file included from /tmp/selfgz13982/NVIDIA-Linux-x86-190.53-pkg1/usr/src/
   nv/nv-linux.h:119,
                    from /tmp/selfgz13982/NVIDIA-Linux-x86-190.53-pkg1/usr/src/
   nv/nv.c:14:
   include/linux/highmem.h: In function ‘zero_user_segments’:
   include/linux/highmem.h:197: warning: pointer of type ‘void *’ used in a
   rithmetic
   include/linux/highmem.h:200: warning: pointer of type ‘void *’ used in a
   rithmetic
   /tmp/selfgz13982/NVIDIA-Linux-x86-190.53-pkg1/usr/src/nv/nv.c: At top level:
   /tmp/selfgz13982/NVIDIA-Linux-x86-190.53-pkg1/usr/src/nv/nv.c:417: error: un
   known field ‘ioctl’ specified in initializer
   /tmp/selfgz13982/NVIDIA-Linux-x86-190.53-pkg1/usr/src/nv/nv.c:417: warning:
   initialization from incompatible pointer type
   /tmp/selfgz13982/NVIDIA-Linux-x86-190.53-pkg1/usr/src/nv/nv.c: In function
   ��nv_kern_open’:
   /tmp/selfgz13982/NVIDIA-Linux-x86-190.53-pkg1/usr/src/nv/nv.c:2188: warning:
   initialization from incompatible pointer type
   make[3]: *** [/tmp/selfgz13982/NVIDIA-Linux-x86-190.53-pkg1/usr/src/nv/nv.o]
   Error 1
   make[2]: *** [_module_/tmp/selfgz13982/NVIDIA-Linux-x86-190.53-pkg1/usr/src/
   nv] Error 2
   NVIDIA: left KBUILD.
   nvidia.ko failed to build!
   make[1]: *** [module] Error 1
   make: *** [module] Error 2
-> Error.
ERROR: Unable to build the NVIDIA kernel module.
ERROR: Installation has failed.  Please see the file
       '/var/log/nvidia-installer.log' for details.  You may find suggestions
       on fixing installation problems in the README available on the Linux
       driver download page at http://www.nvidia.com.
root@bt:~#

root@bt:~# /var/log/nvidia-installer.log
bash: /var/log/nvidia-installer.log: Permission denied
root@bt:~#

Разгледа ли лога?Там трябва да пише какво му е нужно.

root@bt:~# cd /usr/src
root@bt:/usr/src# sh NVIDIA-Linux-x86-190.53-pkg1.run -A

NVIDIA-Linux-x86-190.53-pkg1.run [options]

This program will install the NVIDIA Accelerated Graphics Driver
for Linux-x86 190.53 by unpacking the embedded tarball and executing
the ./nvidia-installer  installation utility.

--info
  Print embedded info (title, default target directory) and exit.

--lsm
  Print embedded lsm entry (or no LSM) and exit.

--pkg-history
  Print the package history of this file and exit.

--list
  Print the list of files in the archive and exit.

--check
  Check integrity of the archive and exit.

-x, --extract-only
  Extract the contents of NVIDIA-Linux-x86-190.53-pkg1.run, but do not
  run 'nvidia-installer'.

--add-this-kernel
  Build a precompiled kernel interface for the currently running
  kernel and repackage the .run file to include this newly built
  precompiled kernel interface.  The new .run file will be placed
  in the current directory and the string "-custom" appended
  to its name, unless already present, to distinguish it from the
  original .run file.

--apply-patch [Patch]
  Apply the patch 'Patch' to the kernel interface files included
  in the .run file, remove any precompiled kernel interfaces
  and then repackage the .run file.  The new .run file will be
  placed in the current directory and the string "-custom"
  appended to its name, unless already present, to distinguish it
  from the original .run file.

--keep
  Do not delete target directory when done.

--target [NewDirectory]
  Extract contents in 'NewDirectory'


The following arguments will be passed on to the ./nvidia-installer
utility:

COMMON OPTIONS:

  -a, --accept-license
      Bypass the display and prompting for acceptance of the
      NVIDIA Software License Agreement.  By passing this option
      to nvidia-installer, you indicate that you have read and
      accept the License Agreement contained in the file
      'LICENSE' (in the top level directory of the driver
      package).

  --update
      Connect to the NVIDIA FTP server '
      ftp://download.nvidia.com ' and determine the latest
      available driver version.  If there is a more recent driver
      available, automatically download and install it.  Any
      other options given on the commandline will be passed on to
      the downloaded driver package when installing it.

  -v, --version
      Print the nvidia-installer version and exit.

  -h, --help
      Print usage information for the common commandline options
      and exit.

  -A, --advanced-options
      Print usage information for the common commandline options
      as well as the advanced options, and then exit.


ADVANCED OPTIONS:

  -a, --accept-license
      Bypass the display and prompting for acceptance of the
      NVIDIA Software License Agreement.  By passing this option
      to nvidia-installer, you indicate that you have read and
      accept the License Agreement contained in the file
      'LICENSE' (in the top level directory of the driver
      package).

  --update
      Connect to the NVIDIA FTP server '
      ftp://download.nvidia.com ' and determine the latest
      available driver version.  If there is a more recent driver
      available, automatically download and install it.  Any
      other options given on the commandline will be passed on to
      the downloaded driver package when installing it.

  -v, --version
      Print the nvidia-installer version and exit.

  -h, --help
      Print usage information for the common commandline options
      and exit.

  -A, --advanced-options
      Print usage information for the common commandline options
      as well as the advanced options, and then exit.

  -i, --driver-info
      Print information about the currently installed NVIDIA
      driver version.

  --uninstall
      Uninstall the currently installed NVIDIA driver.

  --sanity
      Perform basic sanity tests on an existing NVIDIA driver
      installation.

  -e, --expert
      Enable 'expert' installation mode; more detailed questions
      will be asked, and more verbose output will be printed;
      intended for expert users.  The questions may be suppressed
      with the '--no-questions' commandline option.

  -q, --no-questions
      Do not ask any questions; the default (normally 'yes') is
      assumed for all yes/no questions, and the default string is
      assumed in any situation where the user is prompted for
      string input.  The one question that is not bypassed by
      this option is license acceptance; the license may be
      accepted with the commandline option '--accept-license'.

  -s, --silent
      Run silently; no questions are asked and no output is
      printed, except for error messages to stderr.  This option
      implies '--ui=none --no-questions --accept-license'.

  --x-prefix=X-PREFIX
      The prefix under which the X components of the NVIDIA
      driver will be installed; the default is '/usr/X11R6'
      unless nvidia-installer detects that X.Org >= 7.0 is
      installed, in which case the default is '/usr'.  Only under
      rare circumstances should this option be used.

  --xfree86-prefix=XFREE86-PREFIX
      This is a deprecated synonym for --x-prefix.

  --x-module-path=X-MODULE-PATH
      The path under which the NVIDIA X server modules will be
      installed.  If this option is not specified,
      nvidia-installer uses the following search order and
      selects the first valid directory it finds: 1) `X
      -showDefaultModulePath`, 2) `pkg-config
      --variable=moduledir xorg-server`, or 3) the X library path
      (see the '--x-library-path' option) plus either 'modules'
      (for X servers older than X.Org 7.0) or 'xorg/modules' (for
      X.Org 7.0 or later).

  --x-library-path=X-LIBRARY-PATH
      The path under which the NVIDIA X libraries will be
      installed.  If this option is not specified,
      nvidia-installer uses the following search order and
      selects the first valid directory it finds: 1) `X
      -showDefaultLibPath`, 2) `pkg-config --variable=libdir
      xorg-server`, or 3) the X prefix (see the '--x-prefix'
      option) plus 'lib' on 32bit systems, and either 'lib64' or
      'lib' on 64bit systems, depending on the installed Linux
      distribution.

  --opengl-prefix=OPENGL-PREFIX
      The prefix under which the OpenGL components of the NVIDIA
      driver will be installed; the default is: '/usr'.  Only
      under rare circumstances should this option be used.  The
      Linux OpenGL ABI
      (http://oss.sgi.com/projects/ogl-sample/ABI/) mandates this
      default value.

  --opengl-libdir=OPENGL-LIBDIR
      The path relative to the OpenGL library installation prefix
      under which the NVIDIA OpenGL components will be installed.
      The default is 'lib' on 32bit systems, and 'lib64' or 'lib'
      on 64bit systems, depending on the installed Linux
      distribution.  Only under very rare circumstances should
      this option be used.

  --installer-prefix=INSTALLER-PREFIX
      The prefix under which the installer binary will be
      installed; the default is: '/usr'.  Note: please use the
      '--utility-prefix' option instead.

  --utility-prefix=UTILITY-PREFIX
      The prefix under which the NVIDIA utilities
      (nvidia-installer, nvidia-settings, nvidia-xconfig,
      nvidia-bug-report.sh) and the NVIDIA utility libraries will
      be installed; the default is: '/usr'.

  --utility-libdir=UTILITY-LIBDIR
      The path relative to the utility installation prefix under
      which the NVIDIA utility libraries will be installed.  The
      default is 'lib' on 32bit systems, and 'lib64' or 'lib' on
      64bit systems, depending on the installed Linux
      distribution.

  --documentation-prefix=DOCUMENTATION-PREFIX
      The prefix under which the documentation files for the
      NVIDIA driver will be installed.  The default is: '/usr'.

  --kernel-include-path=KERNEL-INCLUDE-PATH
      The directory containing the kernel include files that
      should be used when compiling the NVIDIA kernel module.
      This option is deprecated; please use
      '--kernel-source-path' instead.

  --kernel-source-path=KERNEL-SOURCE-PATH
      The directory containing the kernel source files that
      should be used when compiling the NVIDIA kernel module.
      When not specified, the installer will use
      '/lib/modules/`uname -r`/build', if that directory exists.
      Otherwise, it will use '/usr/src/linux'.

  --kernel-output-path=KERNEL-OUTPUT-PATH
      The directory containing any KBUILD output files if either
      one of the 'KBUILD_OUTPUT' or 'O' parameters were passed to
      KBUILD when building the kernel image/modules.  When not
      specified, the installer will assume that no separate
      output directory was used.

  --kernel-install-path=KERNEL-INSTALL-PATH
      The directory in which the NVIDIA kernel module should be
      installed.  The default value is either
      '/lib/modules/`uname -r`/kernel/drivers/video' (if
      '/lib/modules/`uname -r`/kernel' exists) or
      '/lib/modules/`uname -r`/video'.

  --proc-mount-point=PROC-MOUNT-POINT
      The mount point for the proc file system; if not specified,
      then this value defaults to '/proc' (which is normally
      correct).  The mount point of the proc filesystem is needed
      because the contents of '<proc filesystem>/version' is used
      when identifying if a precompiled kernel interface is
      available for the currently running kernel.  This option
      should only be needed in very rare circumstances.

  --log-file-name=LOG-FILE-NAME
      File name of the installation log file (the default is:
      '/var/log/nvidia-installer.log').

  --tmpdir=TMPDIR
      Use the specified directory as a temporary directory when
      downloading files from the NVIDIA ftp site; if not given,
      then the following list will be searched, and the first one
      that exists will be used: /tmp, /tmp, ., /root.

  -m, --ftp-mirror=FTP-MIRROR
      Use the specified FTP mirror rather than the default '
      ftp://download.nvidia.com ' when downloading driver
      updates.

  -l, --latest
      Connect to the NVIDIA FTP server '
      ftp://download.nvidia.com ' (or use the ftp mirror
      specified with the '--ftp-mirror' option) and query the
      most recent Linux-x86 driver version number.

  -f, --force-update
      Forces an update to proceed, even if the installer thinks
      the latest driver is already installed; this option implies
      '--update'.

  --ui=UI
      Specify what user interface to use, if available.  Valid
      values for UI are 'ncurses' (the default) or 'none'. If the
      ncurses interface fails to initialize, or 'none' is
      specified, then a simple printf/scanf interface will be
      used.

  -c, --no-ncurses-color
      Disable use of color in the ncurses user interface.

  --no-opengl-headers
      Normally, installation will install NVIDIA's OpenGL header
      files.  This option disables installation of the NVIDIA
      OpenGL header files.

  --force-tls=FORCE-TLS
      NVIDIA's OpenGL libraries are compiled with one of two
      different thread local storage (TLS) mechanisms: 'classic
      tls' which is used on systems with glibc 2.2 or older, and
      'new tls' which is used on systems with tls-enabled glibc
      2.3 or newer.  nvidia-installer will select the OpenGL
      libraries appropriate for your system; however, you may use
      this option to force the installer to install one library
      type or another.  Valid values for FORCE-TLS are 'new' and
      'classic'.

  -k, --kernel-name=KERNEL-NAME
      Build and install the NVIDIA kernel module for the
      non-running kernel specified by KERNEL-NAME (KERNEL-NAME
      should be the output of `uname -r` when the target kernel
      is actually running).  This option implies
      '--no-precompiled-interface'.  If the options
      '--kernel-install-path' and '--kernel-source-path' are not
      given, then they will be inferred from KERNEL-NAME; eg:
      '/lib/modules/KERNEL-NAME/kernel/drivers/video/' and
      '/lib/modules/KERNEL-NAME/build/', respectively.

  -n, --no-precompiled-interface
      Disable use of precompiled kernel interfaces.

  --no-runlevel-check
      Normally, the installer checks the current runlevel and
      warns users if they are in runlevel 1: in runlevel 1, some
      services that are normally active are disabled (such as
      devfs), making it difficult for the installer to properly
      setup the kernel module configuration files.  This option
      disables the runlevel check.

  --no-abi-note
      The NVIDIA OpenGL libraries contain an OS ABI note tag,
      which identifies the minimum kernel version needed to use
      the library.  This option causes the installer to remove
      this note from the OpenGL libraries during installation.

  --no-rpms
      Normally, the installer will check for several rpms that
      conflict with the driver (specifically: NVIDIA_GLX and
      NVIDIA_kernel), and remove them if present.  This option
      disables this check.

  -b, --no-backup
      During driver installation, conflicting files are backed
      up, so that they can be restored when the driver is
      uninstalled.  This option causes the installer to simply
      delete conflicting files, rather than back them up.

  -N, --no-network
      This option instructs the installer to not attempt to
      connect to the NVIDIA ftp site (for updated precompiled
      kernel interfaces, for example).

  --no-recursion
      Normally, nvidia-installer will recursively search for
      potentially conflicting libraries under the default OpenGL
      and X server installation locations.  With this option set,
      the installer will only search in the top-level
      directories.

  -K, --kernel-module-only
      Install a kernel module only, and do not uninstall the
      existing driver.  This is intended to be used to install
      kernel modules for additional kernels (in cases where you
      might boot between several different kernels).  To use this
      option, you must already have a driver installed, and the
      version of the installed driver must match the version of
      this kernel module.

  --no-kernel-module
      Install everything but the kernel module, and do not remove
      any existing, possibly conflicting kernel modules.  This
      can be useful in some DEBUG environments.  If you use this
      option, you must be careful to ensure that a NVIDIA kernel
      module matching this driver version is installed
      seperately.

  --no-x-check
      Do not abort the installation if nvidia-installer detects
      that an X server is running.  Only under very rare
      circumstances should this option be used.

  --precompiled-kernel-interfaces-path=PRECOMPILED-KERNEL-INTERFA
  CES-PATH
      Before searching for a precompiled kernel interface in the
      .run file, search in the specified directory.

  --precompiled-kernel-interfaces-url=PRECOMPILED-KERNEL-INTERFAC
  ES-URL
      If no precompiled kernel interfaces are found within the
      driver package or provided on the file system by the Linux
      distribution, check the specified URL for updates.  NVIDIA
      does not intend to provide updated precompiled kernel
      interfaces, but system administrators might use this for
      distributing precompiled kernel interfaces in a local area
      network.

  -X, --run-nvidia-xconfig
      nvidia-installer can optionally invoke the nvidia-xconfig
      utility.  This will update the system X configuration file
      so that the NVIDIA X driver is used.  The pre-existing X
      configuration file will be backed up.  At the end of
      installation, nvidia-installer will ask the user if they
      wish to run nvidia-xconfig; the default response is 'no'.
      Use this option to make the default response 'yes'.  This
      is useful with the '--no-questions' or '--silent' options,
      which assume the default values for all questions.

  --force-selinux=FORCE-SELINUX
      Linux installations using SELinux (Security-Enhanced Linux)
      require that the security type of all shared libraries be
      set to 'shlib_t' or 'textrel_shlib_t', depending on the
      distribution. nvidia-installer will detect when to set the
      security type, and set it using chcon(1) on the shared
      libraries it installs.  If the execstack( system utility
      is present, nvidia-installer will use it to also clear the
      executable stack flag of the libraries.  Use this option to
      override nvidia-installer's detection of when to set the
      security type.  Valid values for FORCE-SELINUX are 'yes'
      (force setting of the security type), 'no' (prevent setting
      of the security type), and 'default' (let nvidia-installer
      decide when to set the security type).

  --selinux-chcon-type=SELINUX-CHCON-TYPE
      When SELinux support is enabled, nvidia-installer will try
      to determine which chcon argument to use by first trying
      'textrel_shlib_t', then 'texrel_shlib_t', then 'shlib_t'.
      Use this option to override this detection logic.

  --no-sigwinch-workaround
      Normally, nvidia-installer ignores the SIGWINCH signal
      before it forks to execute commands, e.g. to build the
      kernel module, and restores the SIGWINCH signal handler
      after the child process has terminated.  This option
      disables this behavior.

  --no-cc-version-check
      The NVIDIA kernel module should be compiled with the same
      compiler that was used to compile the currently running
      kernel. The layout of some Linux kernel data structures may
      be dependent on the version of gcc used to compile it. The
      Linux 2.6 kernel modules are tagged with information about
      the compiler and the Linux kernel's module loader performs
      a strict version match check. nvidia-installer checks for
      mismatches prior to building the NVIDIA kernel module and
      aborts the installation in case of failures. Use this
      option to override this check.

  --no-distro-scripts
      Normally, nvidia-installer will run scripts from
      /usr/lib/nvidia before and after installing or uninstalling
      the driver.  Use this option to disable execution of these
      scripts.


root@bt:/usr/src#

    cd /usr/src
    sh NVIDIA-Linux-x86-190.53-pkg1.run -A
Избирам --no-x-check


cd /usr/src && sh NVIDIA-Linux-x86-190.53-pkg1.run --no-x-check
До тук добре,избирам Accept

 The distribution-provided pre-install script failed!  Continue installation
  anyway?                                               
Избирам YES
Стига до 100% и пак същата грешка:

 ERROR: Unable to load the kernel module 'nvidia.ko'.  This happens most     
         frequently when this kernel module was built against the wrong or     
         improperly configured kernel sources, with a version of gcc that     
         differs from the one used to build the target kernel, or if a driver
         such as rivafb, nvidiafb, or nouveau is present and prevents the
         NVIDIA kernel module from obtaining ownership of the NVIDIA graphics 
         device(s), or NVIDIA GPU installed in this system is not supported by
         this NVIDIA Linux graphics driver release.                           

         Please see the log entries 'Kernel module load error' and 'Kernel     
         messages' at the end of the file '/var/log/nvidia-installer.log' for 
         more information.


ERROR: Installation has failed.  Please see the file
         '/var/log/nvidia-installer.log' for details.  You may find           
         suggestions on fixing installation problems in the README available   
         on the Linux driver download page at http://www.nvidia.com.

loguot
Ctrl + Alt+ F1 ,системата е дебиан базирана
login през init1 с username root вършиш каквото вършиш и reboot

Така го правя,натискам  Ctrl + Alt+ F1.Влизам в конзолен режим и немога да изключа сървара.

Щом не можеш да спреш X-сървъра можеш да го игнорираш.Като изпълниш последната команда да не го взема под внимание,но не знам как ще се оправиш с свободния "nouveau" драйвър.Преди няколко дни си правих опити от любопитство.Деинсталирах всичко,което в името си имаше nouveau след това стартирах командата,но все нещо не му харесваше.Мисля,че искаше ново gcc и на мен ми писна и го оставих.А иначе командата без да си спрял X-сървъра изглежда така:

Код

GeSHi (Bash):
cd /usr/src && sh NVIDIA-Linux-x86-190.53-pkg1.run -z --no-x-check

Код

GeSHi (Bash):
-z # този флаг спира да се взема под внимание nouveau драйвъра
--no-x-check # този пък спира да се взема под внимание X-сървъра

Надявам се тия мои писания да се ти от полза.Успех.

verifing archive integrity...ok
uncomressing NVIDIA Accelerated Graphics Driver for Linux-x86 190.53............/nvidia-installer:invalid option --'z'

loguot
Ctrl + Alt+ F1 ,системата е дебиан базирана
login през init1 с username root вършиш каквото вършиш и reboot

Така го правя,натискам  Ctrl + Alt+ F1.Влизам в конзолен режим и немога да изключа сървара.

След като поставиш флашката,какво ти дават командите:
lsusb
dmesg

sabayon dimitar # lsusb
Bus 002 Device 002: ID 09da:055f A4 Tech Co., Ltd
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 1516:1213 CompUSA
Bus 001 Device 003: ID 04f2:b071 Chicony Electronics Co., Ltd 2.0M UVC Webcam / CNF7129
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


sabayon dimitar # dmesg
   0.349882] raid6: sse2x1    3250 MB/s
[    0.366896] raid6: sse2x2    3394 MB/s
[    0.366897] raid6: using algorithm sse2x2 (3394 MB/s)
[    0.367031] ACPI: WMI: Mapper loaded
[    0.367031] PCI: Using ACPI for IRQ routing
[    0.367031] PCI: pci_cache_line_size set to 64 bytes
[    0.367099] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[    0.367102] reserve RAM buffer: 000000007ffa8000 - 000000007fffffff
[    0.367119] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.367119] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
[    0.367119] hpet0: 4 comparators, 64-bit 25.000000 MHz counter
[    0.370026] Switching to clocksource tsc
[    0.372580] pnp: PnP ACPI init
[    0.372588] ACPI: bus type pnp registered
[    0.381149] pnp: PnP ACPI: found 14 devices
[    0.381151] ACPI: ACPI bus type pnp unregistered
[    0.381155] PnPBIOS: Disabled by ACPI PNP
[    0.381167] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    0.381170] system 00:06: [io  0x0800-0x080f] has been reserved
[    0.381173] system 00:06: [io  0x4000-0x407f] has been reserved
[    0.381176] system 00:06: [io  0x4080-0x40ff] has been reserved
[    0.381179] system 00:06: [io  0x4400-0x447f] has been reserved
[    0.381183] system 00:06: [io  0x4480-0x44ff] has been reserved
[    0.381186] system 00:06: [io  0x4800-0x487f] has been reserved
[    0.381189] system 00:06: [io  0x4880-0x48ff] has been reserved
[    0.381192] system 00:06: [mem 0x000d0000-0x000d3fff window] has been reserved
[    0.381196] system 00:06: [mem 0x000d4000-0x000d7fff window] has been reserved
[    0.381199] system 00:06: [mem 0x000de000-0x000dffff window] has been reserved
[    0.381203] system 00:06: [mem 0xfefe2000-0xfefe3fff] has been reserved
[    0.381206] system 00:06: [mem 0xfefe1000-0xfefe1fff] has been reserved
[    0.381210] system 00:06: [mem 0xfee01000-0xfeefffff] has been reserved
[    0.381213] system 00:06: [mem 0xfed01000-0xfed01fff] has been reserved
[    0.381219] system 00:09: [io  0x0250-0x0253] has been reserved
[    0.381222] system 00:09: [io  0x0256-0x025f] has been reserved
[    0.381225] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.381228] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.381233] system 00:0a: [io  0x0260-0x026f] has been reserved
[    0.381238] system 00:0b: [io  0x5000-0x507f] has been reserved
[    0.381241] system 00:0b: [io  0x5080-0x50ff] has been reserved
[    0.381246] system 00:0c: [mem 0xfc000000-0xfdffffff] has been reserved
[    0.381251] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.381254] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.381257] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.381260] system 00:0d: [mem 0x00100000-0x7fffffff] could not be reserved
[    0.381263] system 00:0d: [mem 0xfc000000-0xffffffff] could not be reserved
[    0.416095] pci 0000:00:09.0: PCI bridge to [bus 01-01]
[    0.416098] pci 0000:00:09.0:   bridge window [io  disabled]
[    0.416102] pci 0000:00:09.0:   bridge window [mem disabled]
[    0.416105] pci 0000:00:09.0:   bridge window [mem pref disabled]
[    0.416111] pci 0000:00:10.0: PCI bridge to [bus 02-02]
[    0.416114] pci 0000:00:10.0:   bridge window [io  0xd000-0xdfff]
[    0.416118] pci 0000:00:10.0:   bridge window [mem 0xfaf00000-0xfbffffff]
[    0.416122] pci 0000:00:10.0:   bridge window [mem 0xe0000000-0xf9ffffff 64bit pref]
[    0.416127] pci 0000:00:15.0: PCI bridge to [bus 03-03]
[    0.416132] pci 0000:00:15.0:   bridge window [io  0xe000-0xefff]
[    0.416142] pci 0000:00:15.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.416150] pci 0000:00:15.0:   bridge window [mem pref disabled]
[    0.416164] pci 0000:00:16.0: PCI bridge to [bus 04-04]
[    0.416165] pci 0000:00:16.0:   bridge window [io  disabled]
[    0.416176] pci 0000:00:16.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.416183] pci 0000:00:16.0:   bridge window [mem pref disabled]
[    0.416202] pci 0000:00:09.0: setting latency timer to 64
[    0.416209] pci 0000:00:10.0: setting latency timer to 64
[    0.416675] ACPI: PCI Interrupt Link [LRP3] enabled at IRQ 23
[    0.416678]   alloc irq_desc for 23 on node -1
[    0.416680]   alloc kstat_irqs on node -1
[    0.416685] pci 0000:00:15.0: PCI INT A -> Link[LRP3] -> GSI 23 (level, low) -> IRQ 23
[    0.416694] pci 0000:00:15.0: setting latency timer to 64
[    0.417161] ACPI: PCI Interrupt Link [LRP4] enabled at IRQ 22
[    0.417164]   alloc irq_desc for 22 on node -1
[    0.417166]   alloc kstat_irqs on node -1
[    0.417170] pci 0000:00:16.0: PCI INT A -> Link[LRP4] -> GSI 22 (level, low) -> IRQ 22
[    0.417179] pci 0000:00:16.0: setting latency timer to 64
[    0.417185] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.417187] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.417190] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.417192] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.417194] pci_bus 0000:00: resource 8 [mem 0x80000000-0xfbffffff]
[    0.417197] pci_bus 0000:00: resource 9 [mem 0xfe000000-0xfebfffff]
[    0.417199] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7]
[    0.417201] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff]
[    0.417204] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[    0.417206] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[    0.417208] pci_bus 0000:01: resource 8 [mem 0x80000000-0xfbffffff]
[    0.417210] pci_bus 0000:01: resource 9 [mem 0xfe000000-0xfebfffff]
[    0.417213] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.417215] pci_bus 0000:02: resource 1 [mem 0xfaf00000-0xfbffffff]
[    0.417217] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xf9ffffff 64bit pref]
[    0.417220] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.417222] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.417224] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.417245] NET: Registered protocol family 2
[    0.417277] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.417372] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.417818] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.418051] TCP: Hash tables configured (established 131072 bind 65536)
[    0.418053] TCP reno registered
[    0.418056] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.418064] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.418136] NET: Registered protocol family 1
[    0.418229] RPC: Registered udp transport module.
[    0.418231] RPC: Registered tcp transport module.
[    0.418233] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.451064] pci 0000:02:00.0: Boot video device
[    0.451073] PCI: CLS 64 bytes, default 64
[    0.451123] Trying to unpack rootfs image as initramfs...
[    0.591337] Freeing initrd memory: 7808k freed
[    0.596198] Simple Boot Flag at 0xef set to 0x1
[    0.597141] audit: initializing netlink socket (disabled)
[    0.597156] type=2000 audit(1319822993.595:1): initialized
[    0.597295] highmem bounce pool size: 64 pages
[    0.597300] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.599823] VFS: Disk quotas dquot_6.5.2
[    0.599889] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.600617] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.601547] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.602074] Registering the dns_resolver key type
[    0.602083] Slow work thread pool: Starting up
[    0.602109] Slow work thread pool: Ready
[    0.602161] NTFS driver 2.1.29 [Flags: R/W].
[    0.602330] ROMFS MTD (C) 2007 Red Hat, Inc.
[    0.602432] QNX4 filesystem 0.2.3 registered.
[    0.602472] fuse init (API version 7.14)
[    0.602753] JFS: nTxBlock = 8192, nTxLock = 65536
[    0.605859] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[    0.606649] SGI XFS Quota Management subsystem
[    0.606914] Btrfs loaded
[    0.607168] aufs 2-35-rcN
[    0.607174] msgmni has been set to 1715
[    0.607583] alg: No test for stdrng (krng)
[    0.607588] async_tx: api initialized (async)
[    0.607644] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.607646] io scheduler noop registered
[    0.607648] io scheduler deadline registered (default)
[    0.607847] pcieport 0000:00:15.0: setting latency timer to 64
[    0.607963]   alloc irq_desc for 40 on node -1
[    0.607965]   alloc kstat_irqs on node -1
[    0.607987] pcieport 0000:00:15.0: irq 40 for MSI/MSI-X
[    0.608152] pcieport 0000:00:16.0: setting latency timer to 64
[    0.608265]   alloc irq_desc for 41 on node -1
[    0.608266]   alloc kstat_irqs on node -1
[    0.608284] pcieport 0000:00:16.0: irq 41 for MSI/MSI-X
[    0.633771] toshiba: not a supported Toshiba laptop
[    0.633900] Linux agpgart interface v0.103
[    0.634211] vesafb: framebuffer at 0xf9000000, mapped to 0xf8580000, using 1536k, total 1536k
[    0.634214] vesafb: mode is 1024x768x16, linelength=2048, pages=0
[    0.634216] vesafb: scrolling: redraw
[    0.634219] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[    0.646373] Console: switching to colour frame buffer device 128x48
[    0.756433] fbcondecor: console 0 using theme 'sabayon'
[    0.820247] fbcondecor: switched decor state to 'on' on console 0
[    0.820942] fb0: VESA VGA frame buffer device
[    0.821175] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.821181] ACPI: Power Button [PWRB]
[    0.821245] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.821249] ACPI: Sleep Button [SLPB]
[    0.821312] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    0.823734] ACPI: Lid Switch [LID]
[    0.823817] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.823820] ACPI: Power Button [PWRF]
[    0.823962] ACPI: acpi_idle registered with cpuidle
[    0.824723] Monitor-Mwait will be used to enter C-1 state
[    0.824739] Monitor-Mwait will be used to enter C-3 state
[    0.824756] Monitor-Mwait will be used to enter C-3 state
[    0.824766] Marking TSC unstable due to TSC halts in idle
[    0.824812] Switching to clocksource hpet
[    0.837558] thermal LNXTHERM:01: registered as thermal_zone0
[    0.837568] ACPI: Thermal Zone [THRM] (52 C)
[    0.837605] ERST: Table is not found!
[    0.837614] isapnp: Scanning for PnP cards...
[    1.150015] isapnp: No Plug & Play device found
[    1.150019] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    4.161029] floppy0: no floppy controllers found
[    4.162890] brd: module loaded
[    4.163810] loop: module loaded
[    4.163812] Compaq SMART2 Driver (v 2.6.0)
[    4.163892] HP CISS Driver (v 3.6.20)
[    4.164320] MM: desc_per_page = 128
[    4.164558] Loading iSCSI transport class v2.0-870.
[    4.165052] fnic: Cisco FCoE HBA Driver, ver 1.4.0.145
[    4.166502] Loading Adaptec I2O RAID: Version 2.4 Build 5go
[    4.166504] Detecting Adaptec I2O RAID controllers...
[    4.166895] Adaptec aacraid driver 1.1-5[26400]-ms
[    4.167154] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[    4.167374] NCR53c406a: no available ports found
[    4.167377] sym53c416.c: Version 1.0.0-ac
[    4.167392] qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options
[    4.167451] QLogic Fibre Channel HBA Driver: 8.03.02-k2
[    4.167547] iscsi: registered transport (qla4xxx)
[    4.167591] QLogic iSCSI HBA Driver
[    4.167593] Emulex LightPulse Fibre Channel SCSI driver 8.3.12
[    4.167595] Copyright(c) 2004-2009 Emulex.  All rights reserved.
[    4.189027] Failed initialization of WD-7000 SCSI card!
[    4.532746] DC390: clustering now enabled by default. If you get problems load
[    4.532748]        with "disable_clustering=1" and report to maintainers
[    4.532829] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[    4.532892] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[    4.532932] megasas: 00.00.04.17.1-rc1 Thu. Oct. 29, 11:41:51 PST 2009
[    4.532975] mpt2sas version 05.100.00.02 loaded
[    4.533116] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[    4.533245] 3ware Storage Controller device driver for Linux v1.26.02.003.
[    4.533286] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[    4.533330] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[    4.533375] nsp32: loading...
[    4.533416] ipr: IBM Power RAID SCSI Device Driver version: 2.5.0 (February 11, 2010)
[    4.533460] RocketRAID 3xxx/4xxx Controller driver v1.6 (090910)
[    4.533502] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
[    4.533586] cxgb3i: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
[    4.533627] iscsi: registered transport (cxgb3i)
[    4.533631] Broadcom NetXtreme II iSCSI Driver bnx2i v2.1.1 (Mar 24, 2010)
[    4.533672] iscsi: registered transport (bnx2i)
[    4.533675] VMware PVSCSI driver - version 1.0.1.0-k
[    4.533724] st: Version 20081215, fixed bufsize 32768, s/g segs 256
[    4.533797] osst :I: Tape driver with OnStream support version 0.99.4
[    4.533798] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[    4.534048] ahci 0000:00:0b.0: version 3.0
[    4.534536] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 5
[    4.534546] ahci 0000:00:0b.0: PCI INT A -> Link[LSA0] -> GSI 5 (level, low) -> IRQ 5
[    4.534582]   alloc irq_desc for 42 on node -1
[    4.534584]   alloc kstat_irqs on node -1
[    4.534592] ahci 0000:00:0b.0: irq 42 for MSI/MSI-X
[    4.534599] ahci 0000:00:0b.0: controller can't do PMP, turning off CAP_PMP
[    4.534637] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 2 ports 3 Gbps 0x3 impl IDE mode
[    4.534641] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pio slum part sxs
[    4.534645] ahci 0000:00:0b.0: setting latency timer to 64
[    4.534805] scsi2 : ahci
[    4.534958] scsi3 : ahci
[    4.535116] ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 42
[    4.535119] ata2: SATA max UDMA/133 irq_stat 0x00400000, PHY RDY changed irq 42
[    4.537979] scsi4 : pata_legacy
[    4.538087] ata3: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
[    5.258021] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    5.258033] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    5.258903] ata2.00: ATAPI: Optiarc DVD RW AD-7590S, 1.00, max UDMA/100
[    5.262023] ata2.00: configured for UDMA/100
[    5.306205] ata1.00: ATA-8: ST9500325AS, 0002SDM1, max UDMA/133
[    5.306208] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    5.308394] ata1.00: configured for UDMA/133
[    5.308493] scsi 2:0:0:0: Direct-Access     ATA      ST9500325AS      0002 PQ: 0 ANSI: 5
[    5.308698] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    5.308740] sd 2:0:0:0: [sda] Write Protect is off
[    5.308743] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.308761] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.308785] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    5.308906]  sda:
[    5.314384] scsi 3:0:0:0: CD-ROM            Optiarc  DVD RW AD-7590S  1.00 PQ: 0 ANSI: 5
[    5.317872]  sda1 sda2 sda3 sda4 <sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    5.335171] Uniform CD-ROM driver Revision: 3.20
[    5.335301] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    5.335412] sr 3:0:0:0: Attached scsi generic sg1 type 5
[    5.336152]  sda5 sda6 sda7 sda8 >
[    5.398896] sd 2:0:0:0: [sda] Attached SCSI disk
[    5.399155] scsi5 : pata_legacy
[    5.399252] ata4: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
[    5.550487] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.1.2 (May 26, 2010)
[    5.550604] I2O subsystem v1.325
[    5.550606] i2o: max drivers = 8
[    5.550761] I2O Configuration OSM v1.323
[    5.550858] I2O Bus Adapter OSM v1.317
[    5.550894] I2O Block Device OSM v1.325
[    5.551064] I2O SCSI Peripheral OSM v1.316
[    5.551100] I2O ProcFS OSM v1.316
[    5.551141] Fusion MPT base driver 3.04.15
[    5.551143] Copyright (c) 1999-2008 LSI Corporation
[    5.551148] Fusion MPT SPI Host driver 3.04.15
[    5.551193] Fusion MPT FC Host driver 3.04.15
[    5.551240] Fusion MPT SAS Host driver 3.04.15
[    5.551286] Fusion MPT misc device (ioctl) driver 3.04.15
[    5.551340] mptctl: Registered with Fusion MPT base driver
[    5.551342] mptctl: /dev/mptctl @ (major,minor=10,220)
[    5.551345] Fusion MPT LAN driver 3.04.15
[    5.551428] usbmon: debugfs is not available
[    5.551430] Initializing USB Mass Storage driver...
[    5.551475] usbcore: registered new interface driver usb-storage
[    5.551476] USB Mass Storage support registered.
[    5.551518] usbcore: registered new interface driver libusual
[    5.551557] usbcore: registered new interface driver ums-alauda
[    5.551596] usbcore: registered new interface driver ums-cypress
[    5.551634] usbcore: registered new interface driver ums-datafab
[    5.551674] usbcore: registered new interface driver ums-freecom
[    5.551712] usbcore: registered new interface driver ums-isd200
[    5.551751] usbcore: registered new interface driver ums-jumpshot
[    5.551790] usbcore: registered new interface driver ums-karma
[    5.551829] usbcore: registered new interface driver ums-onetouch
[    5.551868] usbcore: registered new interface driver ums-sddr09
[    5.551908] usbcore: registered new interface driver ums-sddr55
[    5.551947] usbcore: registered new interface driver ums-usbat
[    5.552076] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    5.555826] i8042.c: Detected active multiplexing controller, rev 1.1.
[    5.558213] serio: i8042 KBD port at 0x60,0x64 irq 1
[    5.558219] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    5.558222] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    5.558224] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    5.558227] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    5.558461] mice: PS/2 mouse device common for all mice
[    5.559112] rtc_cmos 00:08: RTC can wake from S4
[    5.559187] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[    5.559236] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    5.559277] md: linear personality registered for level -1
[    5.559279] md: raid0 personality registered for level 0
[    5.559281] md: raid1 personality registered for level 1
[    5.559283] md: raid10 personality registered for level 10
[    5.559285] md: raid6 personality registered for level 6
[    5.559287] md: raid5 personality registered for level 5
[    5.559289] md: raid4 personality registered for level 4
[    5.559291] md: multipath personality registered for level -4
[    5.559293] md: faulty personality registered for level -5
[    5.559559] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[    5.559701] EDAC MC: Ver: 2.1.0 Sep 19 2010
[    5.559959] EISA: Probing bus 0 at eisa.0
[    5.559961] EISA: Cannot allocate resource for mainboard
[    5.559964] Cannot allocate resource for EISA slot 1
[    5.559966] Cannot allocate resource for EISA slot 2
[    5.559967] Cannot allocate resource for EISA slot 3
[    5.559969] Cannot allocate resource for EISA slot 4
[    5.559971] Cannot allocate resource for EISA slot 5
[    5.559973] Cannot allocate resource for EISA slot 6
[    5.559975] Cannot allocate resource for EISA slot 7
[    5.559977] Cannot allocate resource for EISA slot 8
[    5.559978] EISA: Detected 0 cards.
[    5.560388] cpuidle: using governor ladder
[    5.560932] cpuidle: using governor menu
[    5.561037] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    5.562370] usbcore: registered new interface driver hiddev
[    5.562416] usbcore: registered new interface driver usbhid
[    5.562418] usbhid: USB HID core driver
[    5.562454] Asus Laptop ACPI Extras version 0.30
[    5.568143]   BSTS called, 0xef6b returned
[    5.568146]   unsupported model K50IN, trying default values
[    5.568148]   send /proc/acpi/dsdt to the developers
[    5.568424] TCP bic registered
[    5.568427] NET: Registered protocol family 17
[    5.569685] Using IPI No-Shortcut mode
[    5.569881] TuxOnIce 3.1.1.1 (http://tuxonice.net)
[    5.597601] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    5.762796] TuxOnIce: Can't translate "UUID=873d0c1f-97d1-4e4c-b410-fdcffa28c4c1" into a device id yet.
[    5.769165] registered taskstats version 1
[    5.769563] rtc_cmos 00:08: setting system clock to 2011-10-28 17:29:59 UTC (1319822999)
[    5.769660] Freeing unused kernel memory: 628k freed
[    6.007712] psmouse serio4: ID: 10 00 64
[    6.098552] elantech: assuming hardware version 2, firmware version 4.1.1
[    6.133157] elantech: Synaptics capabilities query result 0x7e, 0x13, 0x0d.
[    6.229477] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input5
[    6.358874] scsi: <fdomain> Detection failed (no card)
[    6.394709] psmouse serio4: ID: 10 00 64
[    6.420326] imm: Version 2.05 (for Linux 2.4.0)
[    6.488868] elantech: assuming hardware version 2, firmware version 4.1.1
[    6.503455] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    6.504020] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 21
[    6.504025]   alloc irq_desc for 21 on node -1
[    6.504027]   alloc kstat_irqs on node -1
[    6.504034] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUB2] -> GSI 21 (level, low) -> IRQ 21
[    6.504050] ehci_hcd 0000:00:04.1: setting latency timer to 64
[    6.504053] ehci_hcd 0000:00:04.1: EHCI Host Controller
[    6.504073] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
[    6.504094] ehci_hcd 0000:00:04.1: debug port 1
[    6.504102] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[    6.504118] ehci_hcd 0000:00:04.1: irq 21, io mem 0xfae7ec00
[    6.510086] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[    6.510469] hub 1-0:1.0: USB hub found
[    6.510473] hub 1-0:1.0: 8 ports detected
[    6.523924] elantech: Synaptics capabilities query result 0x7e, 0x13, 0x0d.
[    6.536086] uhci_hcd: USB Universal Host Controller Interface driver
[    6.557729] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    6.558263] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20
[    6.558267]   alloc irq_desc for 20 on node -1
[    6.558269]   alloc kstat_irqs on node -1
[    6.558276] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20
[    6.558292] ohci_hcd 0000:00:04.0: setting latency timer to 64
[    6.558295] ohci_hcd 0000:00:04.0: OHCI Host Controller
[    6.558307] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2
[    6.558333] ohci_hcd 0000:00:04.0: irq 20, io mem 0xfae7f000
[    6.611370] hub 2-0:1.0: USB hub found
[    6.611375] hub 2-0:1.0: 8 ports detected
[    6.624515] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input6
[    6.634157] sl811: driver sl811-hcd, 19 May 2005
[    6.708613] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k6-NAPI
[    6.708616] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    6.757188] iscsi: registered transport (tcp)
[    6.915024] usb 1-5: new high speed USB device using ehci_hcd and address 3
[    7.337023] usb 2-2: new full speed USB device using ohci_hcd and address 2
[    7.534610] input: A4TECH USB Device as /devices/pci0000:00/0000:00:04.0/usb2/2-2/2-2:1.0/input/input7
[    7.535045] generic-usb 0003:09DA:055F.0001: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:04.0-2/input0
[    7.540395] input: A4TECH USB Device as /devices/pci0000:00/0000:00:04.0/usb2/2-2/2-2:1.1/input/input8
[    7.540769] generic-usb 0003:09DA:055F.0002: input,hidraw1: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:04.0-2/input1
[    9.689748] TuxOnIce: Can't translate "UUID=873d0c1f-97d1-4e4c-b410-fdcffa28c4c1" into a device id yet.
[    9.797391] TuxOnIce: Can't translate "UUID=873d0c1f-97d1-4e4c-b410-fdcffa28c4c1" into a device id yet.
[    9.801217] EXT3-fs (sda8): error: couldn't mount because of unsupported optional features (240)
[    9.801518] EXT2-fs (sda8): error: couldn't mount because of unsupported optional features (240)
[    9.844421] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[   13.504638] <30>udev[4793]: starting version 167
[   13.802751] ACPI: AC Adapter [AC0] (on-line)
[   13.804025] ACPI: Battery Slot [BAT0] (battery absent)
[   13.864024] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   13.864564] ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 19
[   13.864568]   alloc irq_desc for 19 on node -1
[   13.864570]   alloc kstat_irqs on node -1
[   13.864577] r8169 0000:03:00.0: PCI INT A -> Link[LN3A] -> GSI 19 (level, low) -> IRQ 19
[   13.864619] r8169 0000:03:00.0: setting latency timer to 64
[   13.864667]   alloc irq_desc for 43 on node -1
[   13.864669]   alloc kstat_irqs on node -1
[   13.864679] r8169 0000:03:00.0: irq 43 for MSI/MSI-X
[   13.864844] r8169 0000:03:00.0: eth0: RTL8168b/8111b at 0xf8ada000, 90:e6:ba:30:6b:ad, XID 18000000 IRQ 43
[   13.907945] i2c i2c-0: nForce2 SMBus adapter at 0x4d00
[   13.907952] ACPI: resource nForce2_smbus [io  0x4e00-0x4e3f] conflicts with ACPI region SM00 [ 0x00004e00-0x00004e3f flags 0x30]
[   13.907955] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.930116] input: PC Speaker as /devices/platform/pcspkr/input/input9
[   14.062132] cfg80211: Calling CRDA to update world regulatory domain
[   14.083383] acpi device:23: registered as cooling_device2
[   14.090159] acpi device:24: registered as cooling_device3
[   14.090904] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:22/LNXVIDEO:00/input/input10
[   14.090993] ACPI: Video Device [IGPU] (multi-head: yes  rom: no  post: no)
[   14.144389] Linux video capture interface: v2.00
[   14.172575] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   14.178907] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   14.295282] uvcvideo: Found UVC 1.00 device CNF7129 (04f2:b071)
[   14.318055] input: CNF7129 as /devices/pci0000:00/0000:00:04.1/usb1/1-5/1-5:1.0/input/input11
[   14.318108] usbcore: registered new interface driver uvcvideo
[   14.318111] USB Video Class driver (v0.1.0)
[   14.349156] HDA Intel 0000:00:08.0: power state changed by ACPI to D0
[   14.349208] HDA Intel 0000:00:08.0: power state changed by ACPI to D0
[   14.349676] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23
[   14.349680] HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 23 (level, low) -> IRQ 23
[   14.349684] hda_intel: Disable MSI for Nvidia chipset
[   14.349722] HDA Intel 0000:00:08.0: setting latency timer to 64
[   14.747077] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:08.0/input/input12
[   14.785650] ACPI: PCI Interrupt Link [LN4A] enabled at IRQ 18
[   14.785655]   alloc irq_desc for 18 on node -1
[   14.785657]   alloc kstat_irqs on node -1
[   14.785664] ath9k 0000:04:00.0: PCI INT A -> Link[LN4A] -> GSI 18 (level, low) -> IRQ 18
[   14.785673] ath9k 0000:04:00.0: setting latency timer to 64
[   14.835506] ath: EEPROM regdomain: 0x60
[   14.835508] ath: EEPROM indicates we should expect a direct regpair map
[   14.835512] ath: Country alpha2 being used: 00
[   14.835514] ath: Regpair used: 0x60
[   14.838298] phy0: Selected rate control algorithm 'ath9k_rate_control'
[   14.838460] Registered led device: ath9k-phy0::radio
[   14.838475] Registered led device: ath9k-phy0::assoc
[   14.838489] Registered led device: ath9k-phy0::tx
[   14.838503] Registered led device: ath9k-phy0::rx
[   14.838509] phy0: Atheros AR9285 Rev:2 mem=0xf8e60000, irq=18
[   15.550578] nvidia: module license 'NVIDIA' taints kernel.
[   15.550582] Disabling lock debugging due to kernel taint
[   16.557226] ACPI: PCI Interrupt Link [LPMU] enabled at IRQ 22
[   16.557231] nvidia 0000:00:03.5: PCI INT B -> Link[LPMU] -> GSI 22 (level, low) -> IRQ 22
[   16.557691] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 21
[   16.557695] nvidia 0000:02:00.0: PCI INT A -> Link[SGRU] -> GSI 21 (level, low) -> IRQ 21
[   16.557701] nvidia 0000:02:00.0: setting latency timer to 64
[   16.557705] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   16.557982] NVRM: loading NVIDIA UNIX x86 Kernel Module  260.19.36  Tue Jan 18 17:10:40 PST 2011
[   20.407527] EXT4-fs (sda8): re-mounted. Opts: (null)
[   27.136919] r8169 0000:03:00.0: eth0: link down
[   27.702733] fbcondecor: console 1 using theme 'sabayon'
[   27.798593] fbcondecor: switched decor state to 'on' on console 1
[   27.908577] fbcondecor: console 2 using theme 'sabayon'
[   28.004453] fbcondecor: switched decor state to 'on' on console 2
[   28.455581] fbcondecor: console 3 using theme 'sabayon'
[   28.568318] fbcondecor: switched decor state to 'on' on console 3
[   28.667910] fbcondecor: console 4 using theme 'sabayon'
[   28.767297] fbcondecor: switched decor state to 'on' on console 4
[   28.867354] fbcondecor: console 5 using theme 'sabayon'
[   28.963785] fbcondecor: switched decor state to 'on' on console 5
[   30.207564] NET: Registered protocol family 10
[   30.207800] lo: Disabled Privacy Extensions
[   30.207866] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   30.207908] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2770.307538] r8169 0000:03:00.0: eth0: link down
[ 2770.307698] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2770.350026] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2771.575226] r8169 0000:03:00.0: eth0: link down
[ 2771.575383] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2771.614249] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2899.600591] wlan0: authenticate with b0:48:7a:ac:63:d8 (try 1)
[ 2899.602749] wlan0: authenticated
[ 2899.602767] wlan0: associate with b0:48:7a:ac:63:d8 (try 1)
[ 2899.607311] wlan0: RX AssocResp from b0:48:7a:ac:63:d8 (capab=0x31 status=0 aid=2)
[ 2899.607316] wlan0: associated
[ 2899.613734] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 2907.982583] lo: Disabled Privacy Extensions
[ 2909.666085] wlan0: no IPv6 routers present
[ 2968.808021] usb 1-4: new high speed USB device using ehci_hcd and address 4
[ 2968.925055] scsi6 : usb-storage 1-4:1.0
[ 2969.927433] scsi 6:0:0:0: Direct-Access     USB      DISK 2.0         1.00 PQ: 0 ANSI: 2
[ 2969.928011] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 2969.930634] sd 6:0:0:0: [sdb] 16035840 512-byte logical blocks: (8.21 GB/7.64 GiB)
[ 2969.931300] sd 6:0:0:0: [sdb] Write Protect is off
[ 2969.931304] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 2969.931306] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2969.935291] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2969.935297]  sdb: sdb1
[ 2970.814282] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2970.814286] sd 6:0:0:0: [sdb] Attached SCSI removable disk

Видео картата ми е NVIDIA GEFORCE G102 CUDA 512MB.Пиша тези команди:
apt-get install build-essential linux-headers-$(uname -r)

cd /usr/src

ln -s linux-headers-$(uname -r) linux

wget http://us.download.nvidia.com/XFree86/Linux-x86/190.53/NVIDIA-Linux-x86-190.53-pkg1.run

(cd-enter)

/etc/init.d/gdm stop

cd /usr/src && sh NVIDIA-Linux-x86-190.53-pkg1.run

startx.Но не мога да спра X-Server

Ще съм ти много благодарен

Не мога да го намеря.Пиша командата в терминала gedit /etc/inittab,отваря ми се gedit text editor.Избирам Open, и ми излизат само 2 папки с ''I'' init и init.d.A въпросният файл inittab го няма.

No such file or directory

gdm: unrecognized service.Това ми изписва.И когато инсталирам драйвера пак ми изписва,че трябва да изключа x server.