Последните мнения на: CisSe

Със Slackware 12 съм...

Ето ги настройките на рутерът въпреки, че до сега си работеше със тях...

Примерен код

ifconfig eth0 down
ifconfig eth0 hw ether 00:01:6C:21:A0:75
ifconfig eth0 up
ifconfig eth0 10.26.17.5 broadcast 10.26.17.255 netmask 255.255.255.0
ifconfig eth1 192.168.0.1 broadcast 192.168.0.255 netmask 255.255.255.252
route add -net 10.0.0.0 netmask 255.224.0.0 gw 10.26.17.1
route add -host 26.17.optisprint.net gw 10.26.17.1

sleep 3
pptp 26.17.optisprint.net user cvetomir password ********

sleep 8
route add default dev ppp0
route add default gw 26.17.optisprint.net

echo 1 > /proc/sys/net/ipv4/ip_forward
iptables -t nat -A POSTROUTING -j MASQUERADE -o eth1 -s 192.168.0.0/24
iptables -t nat -A POSTROUTING -j MASQUERADE -o ppp0 -s 192.168.0.0/24

...а това са на вътрешният комп...

http://i.data.bg/08/02/02/789547.jpg?ipgq

Примерен код

C:\Documents and Settings\CisSe>ping 192.168.0.1

Pinging 192.168.0.1 with 32 bytes of data:

Reply from 192.168.0.1: bytes=32 time<1ms TTL=64
Reply from 192.168.0.1: bytes=32 time<1ms TTL=64
Reply from 192.168.0.1: bytes=32 time<1ms TTL=64
Reply from 192.168.0.1: bytes=32 time<1ms TTL=64

Ping statistics for 192.168.0.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms

C:\Documents and Settings\CisSe>

Пинг със linux-bg.org нямам от вътрешният комп...