Изпечатай

[Sublimate]

root@niki:/home/niki# /etc/init.d/shaper compile
find: warning: you have specified the -maxdepth option after a non-option argument (, but options are not positional (-maxdepth affects tests specified before it as well as those specified after it).  Please specify options before other arguments.

find: warning: you have specified the -maxdepth option after a non-option argument (, but options are not positional (-maxdepth affects tests specified before it as well as those specified after it).  Please specify options before other arguments.

/sbin/tc qdisc del dev eth1 root
/sbin/tc qdisc add dev eth1 root handle 1 cbq bandwidth 10Mbit avpkt 1000 cell 8
/sbin/tc class change dev eth1 root cbq weight 1Mbit allot 1514

/sbin/tc class add dev eth1 parent 1: classid 1:12 cbq bandwidth 10Mbit rate 20Kbit weight 10Kbit prio 5 allot 1514 cell 8 maxburst 20 avpkt 1000 bounded
/sbin/tc qdisc add dev eth1 parent 1:12 handle 12 tbf rate 20Kbit buffer 10Kb/8 limit 15Kb mtu 1500
/sbin/tc filter add dev eth1 parent 1:0 protocol ip prio 100 u32 match ip dst 192.168.2.5 classid 1:12

echo "shaper."
root@niki:/home/niki# /etc/init.d/shaper restart
Stopping CBQ traffic shaping: shaper.
Starting CBQ traffic shaping: RTNETLINK answers: No such file or directory
shaper.
root@niki:/home/niki#

Някой има ли идея как мога да се справя с очевидните дребни проблеми.

[Sublimate]

Проблемът най-вероятно идва от тук но незнам как да го разреша.

Примерен код

### Check configuration and load DEVICES, DEVFIELDS and CLASSLIST from $1 cbq_init () {    ### Get a list of configured classes    CLASSLIST=`find $1 \( -type f -or -type l \) -name 'cbq-*' \       -not -name '*~' -maxdepth 1 -printf "%f\n"| sort`    [ -z "$CLASSLIST" ] &&       cbq_soft_failure "$2" "no configuration files found in $1!"    ### Gather all DEVICE fields from $1/cbq-*    DEVFIELDS=`find $1 \( -type f -or -type l \) -name 'cbq-*' \         -not -name '*~' -maxdepth 1| xargs sed -n 's/#.*//; \         s/[[:space:]]//g; /^DEVICE=[^,]*,[^,]*\(,[^,]*\)\?/ \         { s/.*=//; p; }'| sort -u`    [ -z "$DEVFIELDS" ] &&       cbq_failure "no DEVICE field found in $1/cbq-*!"    ### Check for different DEVICE fields for the same device    DEVICES=`echo "$DEVFIELDS"| sed 's/,.*//'| sort -u`    [ `echo "$DEVICES"| wc -l` -ne `echo "$DEVFIELDS"| wc -l` ] &&       cbq_failure "different DEVICE fields for single device!\n$DEVFIELDS" } # cbq_init

[Sublimate]

От толкова много разбирачи май един не се намери да даде малко акъл!  '>

[KPETEH]

root@niki:/home/niki# /etc/init.d/shaper restart
Stopping CBQ traffic shaping: shaper.
Starting CBQ traffic shaping: RTNETLINK answers: No such file or directory
shaper.

Това нищо ли не ти говори ?

[Sublimate]

Цитат (KPETEH @ Фев. 27 2007,19:16)

root@niki:/home/niki# /etc/init.d/shaper restart Stopping CBQ traffic shaping: shaper. Starting CBQ traffic shaping: RTNETLINK answers: No such file or directory shaper. Това нищо ли не ти говори ?

Ако знаех точната причина за това съобщение нямаше да пиша тука.
След като моля за помощ явно се вижда, че ми е трудно да се справя сам!