Автор Тема: Fedora 20 Radeon + Nvidia + 2 monitors setup  (Прочетена 4330 пъти)

k0tka

  • Напреднали
  • *****
  • Публикации: 130
  • Distribution: Fedora 23, CentOS, Debian, OS X El Capitan
  • Window Manager: i3wm
    • Профил
Fedora 20 Radeon + Nvidia + 2 monitors setup
« -: Jan 01, 2015, 23:26 »
Здравейте и честита нова година!

Опитвам се да подкарам 2 видеокарти с 2 монитора. Проблема ми е липсата на знания отнасящи се до Х11.И вече след незнам колко опита със свободния и proprietary драйвъра на Ати монитора не иска да запали. Отначало проблема беше че след инсталирането на Ати драйвъра и двата екрана остават черни, което е странно тъй като другата карта е нвидиа и незнам какво общо трябва да има с Ати драйвъра...може би инсталацията блеклиства нвидиа драйвъра, което не успях да установя...както и да е - успях да го инсталирам както е описано тук.

Обаче въпреки това монитора вързан към ати-то си остава черен. Преди да инсталирам proprietary драйвъра положението със свободния беше същото. Ако приемем че драйвъра работи доколкото знам трябва да се конфигурира Х11 да използва и двата монитора но дотук. Генерирах xorg.conf с какво ли не, изчетох много статии свързани с xrandr и xorg но пропускам нещо и незнам защо но никога не ми се е налагало да пипам Х-а.

Давам малко информация за системата ако изпускам нещо свиркайте
Fedora 20 - 3.17.6-200.fc20.x86_64

Цитат
# lshw -c video
  *-display               
       description: VGA compatible controller
       product: GT218 [GeForce 210]
       vendor: NVIDIA Corporation
       physical id: 0
       bus info: pci@0000:01:00.0
       version: a2
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress vga_controller bus_master cap_list rom
       configuration: driver=nvidia latency=0
       resources: irq:34 memory:fd000000-fdffffff memory:a0000000-afffffff memory:b0000000-b1ffffff ioport:e000(size=128) memory:fe000000-fe07ffff
  *-display
       description: VGA compatible controller
       product: Cape Verde XT [Radeon HD 7770/8760 / R7 250X]
       vendor: Advanced Micro Devices, Inc. [AMD/ATI]
       physical id: 0
       bus info: pci@0000:02:00.0
       version: 00
       width: 64 bits
       clock: 33MHz
       capabilities: pm pciexpress msi vga_controller bus_master cap_list rom
       configuration: driver=fglrx_pci latency=0
       resources: irq:33 memory:c0000000-cfffffff memory:fe200000-fe23ffff ioport:d000(size=256) memory:fe240000-fe25ffff

Цитат
01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 210] (rev a2)
   Subsystem: ASUSTeK Computer Inc. Device 8490
   Kernel driver in use: nvidia
   Kernel modules: nouveau, nvidia

02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Cape Verde XT [Radeon HD 7770/8760 / R7 250X]
   Subsystem: PC Partner Limited / Sapphire Technology Device e215
   Kernel driver in use: fglrx_pci
   Kernel modules: radeon, fglrx

Последния Xorg.0.log --> http://pastebin.com/0JKuiWKk
Последния xorg.conf  -->  http://pastebin.com/YnaSPP9L
Ето и изхода от xrandr
Цитат
# xrandr
Screen 0: minimum 8 x 8, current 1440 x 900, maximum 8192 x 8192
DVI-I-0 connected primary 1440x900+0+0 (normal left inverted right x axis y axis) 410mm x 256mm
   1440x900      59.89*+
   1280x1024     75.02    60.02 
   1280x960      60.00 
   1024x768      75.03    60.00 
   800x600       75.00    60.32 
   640x480       75.00    59.94 
VGA-0 disconnected (normal left inverted right x axis y axis)
DVI-I-1 disconnected (normal left inverted right x axis y axis)
HDMI-0 disconnected (normal left inverted right x axis y axis)


Монитора който се вижда е вързания към nvidia-та 19" HP.
Този който не се вижда е 27" asus вързан към ati-то
аti-то е http://www.sapphiretech.com/presentation/product/?cid=1&gid=3&sgid=1159&pid=1523&lid=1
nvidia-та e http://www.asus.com/Graphics_Cards/EN210_SILENTDI1GD3V2LP/

Активен

"If you need an instructional video telling your users how to turn a machine off (http://windows.microsoft.com/en-gb/windows-8/how-shut-down-turn-off-pc), there’s something seriously wrong with your design." --  Andrew Gregory @ linuxvoice

k0tka

  • Напреднали
  • *****
  • Публикации: 130
  • Distribution: Fedora 23, CentOS, Debian, OS X El Capitan
  • Window Manager: i3wm
    • Профил
Re: Fedora 20 Radeon + Nvidia + 2 monitors setup
« Отговор #1 -: Jan 02, 2015, 00:07 »
Съжалявам, това е последния xorg.conf  --> http://pastebin.com/yVFZepXW
Активен

"If you need an instructional video telling your users how to turn a machine off (http://windows.microsoft.com/en-gb/windows-8/how-shut-down-turn-off-pc), there’s something seriously wrong with your design." --  Andrew Gregory @ linuxvoice

bvbfan

  • Напреднали
  • *****
  • Публикации: 1056
  • Distribution: KaOS
  • Window Manager: Plasma 5
    • Профил
Активен

k0tka

  • Напреднали
  • *****
  • Публикации: 130
  • Distribution: Fedora 23, CentOS, Debian, OS X El Capitan
  • Window Manager: i3wm
    • Профил
Re: Fedora 20 Radeon + Nvidia + 2 monitors setup
« Отговор #3 -: Jan 02, 2015, 10:36 »
bvbfan благодаря, конфига е почти готов, ще кажа какво се случва довечера защото не ми остана време да го тествам тази сутрин.
Активен

"If you need an instructional video telling your users how to turn a machine off (http://windows.microsoft.com/en-gb/windows-8/how-shut-down-turn-off-pc), there’s something seriously wrong with your design." --  Andrew Gregory @ linuxvoice

k0tka

  • Напреднали
  • *****
  • Публикации: 130
  • Distribution: Fedora 23, CentOS, Debian, OS X El Capitan
  • Window Manager: i3wm
    • Профил
Re: Fedora 20 Radeon + Nvidia + 2 monitors setup
« Отговор #4 -: Jan 02, 2015, 22:54 »
+ няколко опита - всичките завършващи с черен екран и на двата монитора.
Последния xorg.conf --> http://pastebin.com/m5naRwde
Без значение дали следните цитати ги има или ги няма или са коментирани:
Цитат
Section "Module"
        Load  "glx"
EndSection
Цитат
#Section "Files"
#       ModulePath   "/usr/lib64/xorg/modules"
#       FontPath     "catalogue:/etc/X11/fontpath.d"
#       FontPath     "built-ins"
#EndSection

Поставям Xorg.0.log от последния опит да буутна с горния xorg.conf --> http://pastebin.com/5UuqE6Ju

edit:
Ето и WW/EE от Xorg.0.log
Цитат
# grep WW Xorg.0.log
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     3.945] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[     3.945] (WW) Disabling Mouse0
[     3.945] (WW) Disabling Keyboard0
[     3.950] (WW) "xwayland" is not to be loaded by default. Skipping.
[     4.161] (WW) Unresolved symbol: fbGetGCPrivateKey
[     4.161] (WW) Falling back to old probe method for fglrx
[     4.580] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:0:0) found
[     4.580] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:0:2) found
[     4.580] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:2:0) found
[     4.580] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:4:0) found
[     4.580] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:9:0) found
[     4.580] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
[     4.580] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
[     4.580] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
[     4.580] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
[     4.580] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
[     4.580] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
[     4.580] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:1) found
[     4.580] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
[     4.580] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
[     4.580] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
[     4.580] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
[     4.580] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:0) found
[     4.580] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:3) found
[     4.581] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:0) found
[     4.581] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:2) found
[     4.581] (WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found
[     5.382] (WW) NVIDIA(0): No valid modes for "CRT-0:1440x1900"; removing.
[     5.433] (WW) fglrx(1): board is an unknown third party board, chipset is supported
# grep EE Xorg.0.log
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     3.950] Initializing built-in extension MIT-SCREEN-SAVER

« Последна редакция: Jan 02, 2015, 23:00 от k0tka »
Активен

"If you need an instructional video telling your users how to turn a machine off (http://windows.microsoft.com/en-gb/windows-8/how-shut-down-turn-off-pc), there’s something seriously wrong with your design." --  Andrew Gregory @ linuxvoice

bvbfan

  • Напреднали
  • *****
  • Публикации: 1056
  • Distribution: KaOS
  • Window Manager: Plasma 5
    • Профил
Re: Fedora 20 Radeon + Nvidia + 2 monitors setup
« Отговор #5 -: Jan 03, 2015, 09:13 »
Дефакто ми изглежда всичко да е наред  ::) Може да пробваш Xinerama -> http://nouveau.freedesktop.org/wiki/MultiMonitorDesktop/
Активен

k0tka

  • Напреднали
  • *****
  • Публикации: 130
  • Distribution: Fedora 23, CentOS, Debian, OS X El Capitan
  • Window Manager: i3wm
    • Профил
Re: Fedora 20 Radeon + Nvidia + 2 monitors setup
« Отговор #6 -: Jan 03, 2015, 18:10 »
И на мен всичко ми изглежда наред, но явно не е.
Махнах proprietary driver-а, опитах със свободния, после пак сложих fglrx-а което естествено омаза xorg.conf-а...след няколко опита най-добрия резултат беше че на големия монитор се показа логото за fedora ( 8)) макар и след това всичко да оставаше черно :)

Както и да е..Със xinerama-та и този конфиг --> http://pastebin.com/tf7BMXdn без значение кой драйвър използвам X-а крашва с Backtrace което нямам желание да дебъгвам, защото измежду всичките опити в крайна сметка успя да запали без да крашне но после всичко умираше....както и предположих голяма тор се оказа. Ето малко логове:

Цитат
# grep -E 'WW|EE' /var/log/Xorg.0.log
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     5.382] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[     5.382] (WW) Disabling Mouse0
[     5.382] (WW) Disabling Keyboard0
[     5.384] Initializing built-in extension MIT-SCREEN-SAVER
[     5.384] (WW) "xwayland" is not to be loaded by default. Skipping.
[     5.616] (WW) Unresolved symbol: fbGetGCPrivateKey
[     5.619] (WW) NVIDIA: Xinerama is enabled, so RandR has likely been disabled by the
[     5.619] (WW) NVIDIA:     X server.
[     5.620] (WW) Falling back to old probe method for fglrx
[     6.032] (WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:0) found
[     6.032] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:0:0) found
[     6.032] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:0:2) found
[     6.032] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:2:0) found
[     6.032] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:4:0) found
[     6.032] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:9:0) found
[     6.032] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
[     6.032] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
[     6.032] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
[     6.032] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
[     6.032] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
[     6.032] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
[     6.032] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:1) found
[     6.032] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
[     6.032] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
[     6.032] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
[     6.032] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
[     6.032] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:0) found
[     6.032] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:3) found
[     6.032] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:0) found
[     6.032] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:2) found
[     6.032] (WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found
[     6.032] (EE)
[     6.032] (EE) Backtrace:
[     6.033] (EE) 0: /usr/bin/Xorg (OsLookupColor+0x129) [0x473899]
[     6.033] (EE) 1: /lib64/libpthread.so.0 (__restore_rt+0x0) [0x7fbff341f6cf]
[     6.041] (EE) 2: /usr/lib64/xorg/modules/drivers/fglrx_drv.so (xdl_xs114_atiddxProbe+0x894) [0x7fbfec030f54]
[     6.042] (EE) 3: /usr/lib64/xorg/modules/drivers/fglrx_drv.so (atiddxProbe+0xd) [0x7fbfebe8fb4d]
[     6.042] (EE) 4: /usr/bin/Xorg (xf86BusConfig+0x46) [0x481846]
[     6.042] (EE) 5: /usr/bin/Xorg (InitOutput+0x9bf) [0x48fa6f]
[     6.042] (EE) 6: /usr/bin/Xorg (_init+0x392b) [0x42be3b]
[     6.042] (EE) 7: /lib64/libc.so.6 (__libc_start_main+0xf5) [0x7fbff2039d65]
[     6.043] (EE) 8: /usr/bin/Xorg (_start+0x29) [0x428c45]
[     6.044] (EE) 9: ? (?+0x29) [0x29]
[     6.044] (EE)
[     6.044] (EE) Segmentation fault at address 0x30
[     6.044] (EE)
[     6.044] (EE) Caught signal 11 (Segmentation fault). Server aborting
[     6.044] (EE)
[     6.044] (EE)
[     6.045] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[     6.045] (EE)

dmesg
Цитат
# dmesg | grep -iE 'ati|fglrx|nvidia|vga'
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] No NUMA configuration found
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Hierarchical RCU implementation.
[    0.000000]    RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000023] Calibrating delay loop (skipped), value calculated using timer frequency.. 6985.39 BogoMIPS (lpj=3492698)
[    0.018157] Freeing SMP alternatives memory: 28K (ffffffff81e92000 - ffffffff81e99000)
[    0.018929] ftrace: allocating 27127 entries in 106 pages
[    0.152201] x86: Booting SMP configuration:
[    0.282049] PCI: Using configuration type 1 for base access
[    0.282050] PCI: Using configuration type 1 for extended access
[    0.303447] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
[    0.303466] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
[    0.332640] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.332642] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.332645] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none
[    0.332646] vgaarb: loaded
[    0.332647] vgaarb: bridge control possible 0000:02:00.0
[    0.332648] vgaarb: bridge control possible 0000:01:00.0
[    1.229547] Non-volatile memory driver v1.3
[    1.486868] PM: Hibernation image not present or could not be loaded.
[    2.004136] scsi host4: pata_atiixp
[    2.004309] scsi host5: pata_atiixp
[    2.095426] xor: automatically using best checksumming function:
[    2.176578] tsc: Refined TSC clocksource calibration: 3492.430 MHz
[    2.461218] PM: Hibernation image partition 8:18 present
[    2.461223] PM: Looking for hibernation image.
[    2.462728] PM: Hibernation image not present or could not be loaded.
[    3.283676] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[    3.300553] fglrx: module verification failed: signature and/or  required key missing - tainting kernel
[    3.301670] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[    3.301782] snd_hda_intel 0000:02:00.1: Handle VGA-switcheroo audio client
[    3.340261] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:04.0/0000:02:00.1/sound/card2/input8
[    3.340882] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:04.0/0000:02:00.1/sound/card2/input9
[    3.346082] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    3.346367] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
[    3.346377] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  331.104  Sun Oct  5 21:09:23 PDT 2014
[    3.349943] <6>[fglrx] Maximum main memory to use for locked dma buffers: 15631 MBytes.
[    3.366081] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:04.0/0000:02:00.1/sound/card2/input10
[    3.366775] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:04.0/0000:02:00.1/sound/card2/input11
[    3.366893] <6>[fglrx]   vendor: 1002 device: 683d revision: 0 count: 1
[    3.367003] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:04.0/0000:02:00.1/sound/card2/input12
[    3.367127] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:04.0/0000:02:00.1/sound/card2/input13
[    3.369982] <6>[fglrx] ioport: bar 4, base 0xd000, size: 0x100
[    3.371986] <6>[fglrx] Kernel PAT support is enabled
[    3.372039] <6>[fglrx] module loaded - fglrx 14.50.2 [Nov 20 2014] with 1 minors
[    3.382254] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
[    3.382661] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
[    3.383055] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input16
[    3.383292] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input17
[    3.383612] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input18
[    3.383942] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input19
[    3.487523] kvm: Nested Virtualization enabled
[    3.673156] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input20
[    3.673771] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input21
[    3.675091] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input22
[    3.676253] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input23
[    5.626620] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    6.099216] fglrx_pci 0000:02:00.0: irq 34 for MSI/MSI-X
[    6.100690] <6>[fglrx] Firegl kernel thread PID: 878
[    6.100944] <6>[fglrx] Firegl kernel thread PID: 879
[    6.101190] <6>[fglrx] Firegl kernel thread PID: 880
[    6.101503] <6>[fglrx] IRQ 34 Enabled
[    6.118026] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
[    6.118035] <6>[fglrx] Reserved FB block: Unshared offset:f7b4000, size:4000
[    6.118049] <6>[fglrx] Reserved FB block: Unshared offset:f7b8000, size:548000
[    6.118054] <6>[fglrx] Reserved FB block: Unshared offset:3fff3000, size:d000
[    8.838176] kvm: zapping shadow pages for mmio generation wraparound
[    9.396393] kvm: zapping shadow pages for mmio generation wraparound
[   12.067690] virbr0: topology change detected, propagating
[   12.171681] virbr0: topology change detected, propagating
[   12.643301] virbr0: topology change detected, propagating
[   12.739288] virbr0: topology change detected, propagating

Ще разгледам още малко за xinerama-та и ще пиша.
Активен

"If you need an instructional video telling your users how to turn a machine off (http://windows.microsoft.com/en-gb/windows-8/how-shut-down-turn-off-pc), there’s something seriously wrong with your design." --  Andrew Gregory @ linuxvoice

bvbfan

  • Напреднали
  • *****
  • Публикации: 1056
  • Distribution: KaOS
  • Window Manager: Plasma 5
    • Профил
Re: Fedora 20 Radeon + Nvidia + 2 monitors setup
« Отговор #7 -: Jan 03, 2015, 18:23 »
Я пробвай първо 2-та монитора с всяка карта поотделно ще разботят ли, после може да ти хрумне или да видиш как са генерирани Xorg файловете за всяка.
Активен

Подобни теми
Заглавие Започната от Отговора Прегледи Последна публикация
ATI Radeon 9600 XT - Fedora CORE 2 ?
Настройка на хардуер
s01o 2 3996 Последна публикация Jun 18, 2004, 11:04
от
Radeon 9550 & fedora core 6 - drivers
Настройка на хардуер
Slaya 1 4647 Последна публикация Apr 17, 2007, 01:35
от ivo1204
Проблем с Nvidia драйвери на Fedora 10
Настройка на хардуер
asdokp 11 4177 Последна публикация Apr 09, 2009, 20:00
от asdokp
xorg.conf и dual monitors
Настройка на програми
toti84 6 3188 Последна публикация Mar 18, 2011, 11:57
от kalinik
ATI Radeon HD 5450 & Fedora 20 ...
Настройка на хардуер
ddantgwyn 7 4865 Последна публикация Dec 29, 2013, 12:19
от ddantgwyn