Въпроса ТИ НЕ Е ТЪП !
Но аз също КАТО ТЕБ ПРЕДИ точно 7 ДЕНА си купих DVD-RW NEC 3500A !
И също като теб нямах опит или идея за това как стоят нещата, но с GOOGLE си намерих всичко , което ми трябваше !
Сам самичак - което ме навежда на мисълта , че щом аз мога -> могат и другите

'>
Ето ти линкче към една страничка , която се чудя как не си попаднал - по-скоро май не си я прочел цялата ил повечето

'>, но може И ДА ГРЕША !!
http://fy.chalmers.se/~appro/linux/DVD+RW/Цитат |
Q. What are the dvd+rw-tools for? A. As implied/already mentioned - to master the DVD media, both +RW/+R and -R[W]. I could simply refer to the tutorial below, but figured that couple of words about the [original] design ideas behind growisofs, the principal burning utility, wouldn't harm. Even though a modified kernel can let you put for example an ext2 file system on DVD+RW, it's probably not very practical, because you most likely want to access the data on an arbitrary computer. Or in other words you most likely want ISO9660. The trouble is that you might as well want to add data now and then. And what options do you have in the lack of multiple sessions (no, DVD+RW has no notion of multiple sessions)? Complete re-mastering which takes more and more time as data set grows? Well, yes, unless you employ growisofs! Growisofs provides the way to both lay down and grow an ISO9660 file system on (as well as to burn an arbitrary pre-mastered image to) all supported DVD media.
|
http://axljab.homelinux.org/DVD_writing -> това е от multisession dvd linux търсене, а горното е от търсене за dvd linux и още нещо , но не помня какво беше, но просто аз имах желание и както виждаш съм стигнал доста далеч, защото това е само началото , а има още много инф. , която ще ти трябва , а и искаш да знаеш
'>
После като почнеш DVDrip/backup и т.н става още по-весело , различни те стандарти ...
и т.н , и т.н