Тема: KDE 3.1.5 + grp:alt_shift_toggle (Прочетена 1162 пъти)

the_real_maniac · « -: Feb 18, 2004, 21:50 »

Здравейте , в момента Ви пиша от КДЕ 3.1.5 - ДЕБИАН - логично testging / unstable

'>, въпреки че да Ви кажа има защо да носи това име , въпреки че пак се държи прекалено stable , както и да е не за това е темата тук !
Темата е за Хфрее и КДЕ ... ясно беше, че Линукс ще се разшири - трябва да поддържа много хардуер , софтуерни зависимости / изискваня и т.н , и вскякакви такива

'> Т.е разшири се - това хубаво , става по-голямо , по-трудно законтрол.. Е усеща се това ...

Проблема ми , който ще послужи и като пример .:

Просто и елементарно кирилизиране - писане !
Има фонтове - ОК !
XF86Config-4.:

Примерен код

  Option "XkbRules"   "xfree86"
   Option "XkbModel"   "pc104"
   Option "XkbLayout"   "us,bg"
   Option "XkbVariant" ",phonetic"
   Option "XkbOption" "grp:alt_shift_toggle"
   Option "XkbCompact" "group_led"

Така и при тази ситуация , забравете да имате клавиатура ... да може да сменяте клавиатурите ... е как ще можете , това под КДЕ 3.1.5 !Т.е неможете да сменяте м/у двете подредби .

Добре , виждаме Keyboard Layout

'> - указваме тук us - главна , bg (phonetic) - втора , друга; отиваме на второто под меню и указвам това, което вече БЯХ ОКАЗАЛ в ХФ86Конфига-4 ':angry:'

- , че скорл_люк_лед-а ще ми свети и че алт+шифт ще ми е комбинацията за сменяне , но не и пак неще ... ехххх ...

Разбирам аз , че ще трябва да указвам на СПЕЦИАЛНО ДРУГО МЯСТО shortcuts - да има такова нещо - да , защо не , даже супер, но там трябва отново да указвам как да превключвам подредбите , еми ок , айде щом трябва, така де не плащам за този Софтуер и си има свойте недостатъци - приемам го ... Искам да си укажа ALT+SHIFT , да но ето какво става ...

ALT_LEFT + SHIFT_LEFT пише ALT + ISO_PREV_GROUP
RIGHT_ALT + RIGHT_SHIFT пише ALT + ISO_NEXT_GROUP

Но нищо не става ОТНОВО !!! Е ДАМИ И ГОСПОДА ... моля дайте решение на проблема ми ...

'>

Благодаря Ви предварително и не ми харесва това, че трябва да укажа едно нещо на 10000 места и то пак да не работи ... , значи разбирам необходимостта от графичен интерфейс, но защо не забелязва , че има конфигурация в КОНФИГУРАЦИОННИЯ ГЛАВЕН ФАЙЛ , вслучея XF86Config-4 ?!. ... и логично да спазва тях и вече ако се правят промени чрез графичния тул да спазва тях ... но това е само теория - да и все пак не е ли това правилния начин , а не да се разединяват , всмисъл Х-а си гледа неговия конфиг ,кде-то едва ли не му казва , аре у лево ... и на всичкото отгоре самия КДЕ "не си вярва" някак си , знам че това не са ИТ / компютърни / термини ,но ситуацията е смешна и трагична, ако са допуснати прекалено големи грешки - не се карайте много , а обяснете , но на мен тази ситуация не ми харесва

'>

Благодря предварително и въпреки това , след настройка върви и е по-добре от Уиндоус , защото може и някой да се хване за сламката и да почне оффтопици уин е по-така и т.н ... With respect to Linux ...

the_real_maniac · « **Отговор #1 -:** Feb 18, 2004, 21:57 »

Забравих да напиша нещо , важно примерно сега е

alt + backspace

'>
когато сменя веднъж и нали е сменена подредбата - светва скролл_лук_лед-а (изв. за тая шльокавица ... ) и долу на лентата иконката ми се смени от ус на бг вече като давам алт-шифт ми се сменя подредбата , но единствената видима разлика , всмисъл не като дали пиша на бг , пиша си има предвид лед-а и иконката в лентата долу ! Значи само лапичката гансе и т.н , но в лентата долу си стои на бг , върна ли с ръчно с мишока на ус вече алт+шифт не работи , но сменя ли на бг ръчно с мишока или алт+backspace , както сега , вече алт-шифт действа ... още една шантава истрояи , но как няма да е то 10000 конф.

Предположение в Х-конф. има опция XkbDisable ? ако дам YES и да работя само с КДЕ контрол панела, пробвал съм да махна часта на Хкб от Хфконфига и само Контрол панел , няма успех ...,същото като сега ...

zazzko · « **Отговор #2 -:** Feb 19, 2004, 10:50 »

Цитат

Section "InputDevice"
   Identifier "Keyboard0"
   Driver "keyboard"
   Option    "XkbLayout" "us,bg"
   Option    "XkbVariant" ",phonetic"
   Option "XkbOptions" "grp:alt_shift_toggle"
EndSection

Нищо не разбрах

'> , но ето работеща конфигурация на клавиатурата. Сменя се с Shift+Alt. Верно, нищо не всети, но може да пробваш програмата KKBSwitch. Подобна е на аплета на KDE, но върши по-добра работа.

ivo_bg · « **Отговор #3 -:** Feb 19, 2004, 11:59 »

Пич, не знам защо става така при теб. Аз никога не съм имал проблеми с кирилизация и/или клавиатурна подредба. Винаги единствено X-а ми е отговарял за клавиатурната подредба и никога не съм пипал KDE (ползвах ги всичките 3.1.0 - 3.1.5), XFCE, Gnome или която и да е друга Desktop среда. Днес дори upgrade-вах до XFree86 4.3.0 и всичко пак си работи по старому. Ако това ще ти помогне, ето ти фрагмент и от моя XF86Config-4:

Section "InputDevice"
   Identifier   "Generic Keyboard"
   Driver      "keyboard"
   Option      "CoreKeyboard"
   Option      "XkbRules"   "xfree86"
   Option      "XkbModel"   "pc104"
   Option      "XkbLayout"   "bg"
   Option      "XkbVariant"   "phonetic"
   Option      "XkbOptions"   "grp:ctrl_shift_toggle"
   Option       "XkbCompat" "group_led"
EndSection

the_real_maniac · « **Отговор #4 -:** Feb 19, 2004, 15:45 »

Sorry za lat , kratyk 6te sym

'> Eto go moq XF86Config-4 ( mahnal sym izlinite komentari

'> , e i tozi otgore move6e , no da pokava 4e zapo4wa ot tam

'> ).
Taka ot fglrxconfig e prawen , no sym go editwal logi4no za monitor i kbd-to !
Taka eto go i nego , samo endna opciq q ima wklu4ena ,koqto neznam kakwo prawi - autorepeat !?. , a otnosno towa " Option "CoreKeyboard" " , to nali po-dolu w server layout se ukazwa koj sa core pointer devices

'> e 6te probwam de ... 10x in advance

'>

Примерен код

# File: XF86Config-4
# File generated by fglrxconfig (C) ATI Research, a substitute for xf86config.

# Note by ATI: the below copyright notice is there for servicing possibly
# pending third party rights on the file format and the instance of this file.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************

# **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
   Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
# Group 100 # users
# Mode 0660
EndSection

# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

   Load "dbe"     # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
   SubSection "extmod"
   Option "omit xfree86-dga" # don't initialise the DGA extension
   EndSubSection

# This loads the Type1 and FreeType font modules
   Load "type1"
   Load "freetype"
# Load "TrueType"

# This loads the GLX module
   Load "glx" # libglx.a
   Load "dri" # libdri.a

EndSection

# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"
  FontPath     "/usr/X11R6/lib/X11/fonts/misc"
  FontPath     "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/Type1"
  FontPath     "/usr/X11R6/lib/X11/fonts/Speedo"
  FontPath     "/usr/X11R6/lib/X11/fonts/TrueType"
  FontPath     "/usr/X11R6/lib/X11/fonts/util"
  FontPath     "/usr/X11R6/lib/X11/fonts/encodings"

# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.

   RgbPath   "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#

# FontPath "/usr/X11R6/lib/X11/fonts/local/"

# The module search path. The default path is shown here.

# ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

# Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

# Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.

# Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

# Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

# Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

# Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

# Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

   Identifier   "Keyboard1"
   Driver   "Keyboard"

   Option "AutoRepeat" "500 30"

   Option "XkbRules"   "xfree86"
   Option "XkbModel"   "pc104"
   Option "XkbLayout"   "us,bg"
   Option "XkbVariant" ",phonetic"
   Option "XkbOption" "grp:alt_shift_toggle"
   Option "XkbCompact" "group_led"

EndSection

# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

   Identifier   "Mouse1"
   Driver "mouse"
   Option "Protocol" "PS/2"
   Option "Device" "/dev/psaux"

EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
   Identifier "Monitor0"
   HorizSync 31.5 - 91.1
   VertRefresh 50-120
   Option "DPMS"

# === mode lines based on GTF ===
Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync

EndSection

Section "Monitor"
   Identifier "Monitor1"
   HorizSync 31.5 - 91.1
   VertRefresh 60 - 100
   Option "DPMS"

# === mode lines based on GTF ===
# XVGA @ 100Hz
# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync

EndSection

# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
   Identifier "Standard VGA"
   VendorName "Unknown"
   BoardName "Unknown"

# Chipset "generic"

   Driver "vga"

# BusID "PCI:0:10:0"

# VideoRam 256

# Clocks 25.2 28.3

EndSection

# === ATI device section ===

Section "Device"
   Identifier "ATI Graphics Adapter"
   Driver "fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor ===
   #Option "NoDDC"
# === disable/enable XAA/DRI ===
   Option "no_accel" "no"
   Option "no_dri" "no"
# === misc DRI settings ===
   Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
   Option "DesktopSetup" "0x00000100"
   Option "MonitorLayout" "CRT, STV"
   Option "IgnoreEDID" "off"
   Option "HSync2" "31.5 - 91.1"
   Option "VRefresh2" "60 - 100"
   Option "ScreenOverlap" "0"
# === TV-out Management ===
   Option "NoTV" "no"
   Option "TVStandard" "PAL-B"
   Option "TVHSizeAdj" "0"
   Option "TVVSizeAdj" "0"
   Option "TVHPosAdj" "0"
   Option "TVVPosAdj" "0"
   Option "TVHStartAdj" "0"
   Option "TVColorAdj" "0"
   Option "GammaCorrectionI" "0x00000000"
   Option "GammaCorrectionII" "0x00000000"
# === OpenGL specific profiles/settings ===
   Option "Capabilities" "0x00000000"
# === Video Overlay for the Xv extension ===
   Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
   Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
   Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
   Option "PseudoColorVisuals" "off"
# === QBS Management ===
   Option "Stereo" "off"
   Option "StereoSyncEnable" "1"
# === FSAA Management ===
   Option "FSAAEnable" "no"
   Option "FSAAScale" "1"
   Option "FSAADisableGamma" "no"
   Option "FSAACustomizeMSPos" "no"
   Option "FSAAMSPosX0" "0.000000"
   Option "FSAAMSPosY0" "0.000000"
   Option "FSAAMSPosX1" "0.000000"
   Option "FSAAMSPosY1" "0.000000"
   Option "FSAAMSPosX2" "0.000000"
   Option "FSAAMSPosY2" "0.000000"
   Option "FSAAMSPosX3" "0.000000"
   Option "FSAAMSPosY3" "0.000000"
   Option "FSAAMSPosX4" "0.000000"
   Option "FSAAMSPosY4" "0.000000"
   Option "FSAAMSPosX5" "0.000000"
   Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
   Option "UseFastTLS" "2"
   Option "BlockSignalsOnLock" "on"
   Option "UseInternalAGPGART" "yes"
   Option "ForceGenericCPU" "no"
   BusID "PCI:1:0:0" # vendor=1002, device=514d
   Screen 0
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
   Identifier "Screen0"
   Device "ATI Graphics Adapter"
   Monitor "Monitor0"
   DefaultDepth 24
   #Option "backingstore"

   Subsection "Display"
   Depth 24
   Modes "1024x768@100"
   ViewPort 0 0 # initial origin if mode is smaller than desktop
# Virtual 1280 1024
   EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
   Identifier "Server Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.

   Screen "Screen0"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

   InputDevice "Mouse1" "CorePointer"
   InputDevice "Keyboard1" "CoreKeyboard"

EndSection

### EOF ###

Автор Тема: KDE 3.1.5 + grp:alt_shift_toggle (Прочетена 1162 пъти)