Изпечатай

[jakobs]

Здравейте,

имам проблем с прегряването на компютъра обикновено статистиките изглеждат така:

Код:

acpitz-virtual-0
Adapter: Virtual device
temp1:        +84.5°C  (crit = +100.0°C)

k10temp-pci-00c3
Adapter: PCI adapter
temp1:        +91.0°C  (high = +70.0°C)
                       (crit = +100.0°C, hyst = +95.0°C)

radeon-pci-0200
Adapter: PCI adapter
temp1:        +90.5°C  

i8k-virtual-0
Adapter: Virtual device
Right Fan:   140400 RPM
CPU:          +84.0°C  

i8kctl :

Код:

1.0 (null) 96M5ZJ1 83 -1 2 -1 138000 0 -1

Код:

-Inspiron-1546:~$ i8kfan 
-1 2

Код:

cpufreq-info
cpufrequtils 007: cpufreq-info (C) Dominik Brodowski 2004-2009
Report errors and bugs to cpufreq@vger.kernel.org, please.
analyzing CPU 0:
  driver: powernow-k8
  CPUs which run at the same hardware frequency: 0
  CPUs which need to have their frequency coordinated by software: 0
  maximum transition latency: 1000 ns.
  hardware limits: 1.05 GHz - 2.10 GHz
  available frequency steps: 2.10 GHz, 1.05 GHz
  available cpufreq governors: conservative, ondemand, userspace, powersave, performance
  current policy: frequency should be within 1.05 GHz and 2.10 GHz.
                  The governor "ondemand" may decide which speed to use
                  within this range.
  current CPU frequency is 1.05 GHz.
  cpufreq stats: 2.10 GHz:10.71%, 1.05 GHz:89.29%  (7928)
analyzing CPU 1:
  driver: powernow-k8
  CPUs which run at the same hardware frequency: 1
  CPUs which need to have their frequency coordinated by software: 1
  maximum transition latency: 1000 ns.
  hardware limits: 1.05 GHz - 2.10 GHz
  available frequency steps: 2.10 GHz, 1.05 GHz
  available cpufreq governors: conservative, ondemand, userspace, powersave, performance
  current policy: frequency should be within 1.05 GHz and 2.10 GHz.
                  The governor "ondemand" may decide which speed to use
                  within this range.
  current CPU frequency is 1.05 GHz.
  cpufreq stats: 2.10 GHz:10.95%, 1.05 GHz:89.05%  (6803)

Защо единия процесор работи на 90%, като си мислех че съм ги настроил и двата да работят на 1.05? как да ги пусна и двата на 1.05 за да ми е мирна главата?

[Zubcho_]

Напиши top в конзола и виж кой процес товари едното ядро. Там е проблема. cpufreq е нагласен правилно.