Изпечатай

[sunshine]

Здравейте
имам един проблем който не мога да разреша и ще се радвам на всякаква помощ която ми окажете

значи имам програматор USB-Blaster който си купих до скоро го ползвах на Suse 10.0 но когато излезе Suse 10.2 го инсталирах и разбрах че програмата Quartus не го разпознава защото няма hotplug система. Ето как се настройваше във hotplug моля да ми помогнете да го настроя за новото Suse 10.2

Цитат

To use USB-Blaster under Linux you need to set up the permissions correctly. On redhat you need to add the following lines to /etc/hotplug/usb.usermap - on Debian create a file /etc/hotplug/usb/usbblaster.usermap and copy the lines into it. # # Altera USB-Blaster # usbblaster 0x03 0x09fb 0x6001 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 usbblaster 0x03 0x09fb 0x6002 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 usbblaster 0x03 0x09fb 0x6003 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 And then add the following script as /etc/hotplug/usb/usbblaster: #!/bin/sh # USB-Blaster hotplug script. # Allow any user to access the cable chmod 666 $DEVICE This should set up your USB-Blaster so that any user can access it. You may of course care about security, in which case you would put more careful rules into the script, for example you could set the files to mode 660 and set the group to a group of users who should be allowed to use it. Now plug in and go... (If you plugged in before making these changes then the permissions will still be wrong - you'll need to unplug and replug your USB-Blaster).

lsusb го разпознава , но програмата Quartus не иска

благодаря предварително