Автор Тема: Лило , как да добавя още едно ядро ?  (Прочетена 1123 пъти)

Pavlik

  • Напреднали
  • *****
  • Публикации: 101
  • Linux :)
    • Профил
Лило , как да добавя още едно ядро ? е вие сте :)
Активен

Умните си решават проблемите. Мъдрите не ги допускат.

ROKO__

  • Напреднали
  • *****
  • Публикации: 1531
  • Distribution: Calculate Linux Workstation amd64
  • Window Manager: GNOME 2.30
  • AMD Athlon64 4000+ Dual Core 2100 MHz 2MB L2 cache
    • Профил
Re: Лило , как да добавя още едно ядро ?
« Отговор #1 -: Apr 27, 2010, 19:46 »
Много лесно.

Само кажи имената на ядрата или по точно замествай по примера

======
boot=/dev/sda
lba32
title Laino GNU
delay 1200 # opredelya sled kolko sekundi da se bootne sistemata
image = /boot/laino ro vga=795
initrd = /boot/laino.img # ako ima initrd
Активен

Не е важно да си добър, важно е да си най добрия!!!

http://www.calculate-linux.ru/
http://www.agilialinux.ru/

Pavlik

  • Напреднали
  • *****
  • Публикации: 101
  • Linux :)
    • Профил
Re: Лило , как да добавя още едно ядро ?
« Отговор #2 -: Apr 27, 2010, 20:29 »
Ето какво пише в него :) Ядрото е версия =>    2.6.33.1
# LILO configuration file
# generated by 'liloconfig'
#
# Start LILO global section
# Append any additional kernel parameters:
append=" vt.default_utf8=0"
boot = /dev/sda

# Boot BMP Image.
# Bitmap in BMP format: 640x480x8
  
bitmap = /boot/slack.bmp
# Menu colors (foreground, background, shadow, highlighted
# foreground, highlighted background, highlighted shadow):
  
bmp-colors 255,0,255,0,255,0
# Location of the option table: location x, location y, number of
# columns, lines per column (max 15), "spill" (this is how many
# entries must be in the first column before the next begins to
# be used.  We don't specify it here, as there's just one column.
  
bmp-table 60,6,1,16
# Timer location x, timer location y, foreground color,
# background color, shadow color.
  
bmp-timer 65,27,0,255

# Standard menu.
# Or, you can comment out the bitmap menu above and 
# use a boot message with the standard menu:
#message = /boot/boot_message.txt

# Wait until the timeout to boot (if commented out, boot the
# first entry immediately):
prompt
# Timeout before the first entry boots.
# This is given in tenths of a second, so 600 for every minute:
timeout 1200
# Override dangerous defaults that rewrite the partition table:
change-rules
  reset
# VESA framebuffer console @ 1024x768x256
vga 773
# Normal VGA console
# vga = normal
# VESA framebuffer console @ 1024x768x64k
# vga=791
# VESA framebuffer console @ 1024x768x32k
# vga=790
# VESA framebuffer console @ 1024x768x256
# vga=773
# VESA framebuffer console @ 800x600x64k
# vga=788
# VESA framebuffer console @ 800x600x32k
# vga=787
# VESA framebuffer console @ 800x600x256
# vga=771
# VESA framebuffer console @ 640x480x64k
# vga=785
# VESA framebuffer console @ 640x480x32k
# vga=784
# VESA framebuffer console @ 640x480x256
# vga=769
# End LILO global section
# Linux bootable partition config begins
image = /boot/vmlinuz
  root 
= /dev/sda1
  label 
Linux
  read
-only
# Linux bootable partition config ends
Активен

Умните си решават проблемите. Мъдрите не ги допускат.

ROKO__

  • Напреднали
  • *****
  • Публикации: 1531
  • Distribution: Calculate Linux Workstation amd64
  • Window Manager: GNOME 2.30
  • AMD Athlon64 4000+ Dual Core 2100 MHz 2MB L2 cache
    • Профил
Re: Лило , как да добавя още едно ядро ?
« Отговор #3 -: Apr 27, 2010, 20:59 »
Ето какво пише в него :) Ядрото е версия =>    2.6.33.1
# LILO configuration file
# generated by 'liloconfig'
#
# Start LILO global section
# Append any additional kernel parameters:
append=" vt.default_utf8=0"
boot = /dev/sda

# Boot BMP Image.
# Bitmap in BMP format: 640x480x8
  
bitmap = /boot/slack.bmp
# Menu colors (foreground, background, shadow, highlighted
# foreground, highlighted background, highlighted shadow):
  
bmp-colors 255,0,255,0,255,0
# Location of the option table: location x, location y, number of
# columns, lines per column (max 15), "spill" (this is how many
# entries must be in the first column before the next begins to
# be used.  We don't specify it here, as there's just one column.
  
bmp-table 60,6,1,16
# Timer location x, timer location y, foreground color,
# background color, shadow color.
  
bmp-timer 65,27,0,255

# Standard menu.
# Or, you can comment out the bitmap menu above and 
# use a boot message with the standard menu:
#message = /boot/boot_message.txt

# Wait until the timeout to boot (if commented out, boot the
# first entry immediately):
prompt
# Timeout before the first entry boots.
# This is given in tenths of a second, so 600 for every minute:
timeout 1200
# Override dangerous defaults that rewrite the partition table:
change-rules
  reset
# VESA framebuffer console @ 1024x768x256
vga 773
# Normal VGA console
# vga = normal
# VESA framebuffer console @ 1024x768x64k
# vga=791
# VESA framebuffer console @ 1024x768x32k
# vga=790
# VESA framebuffer console @ 1024x768x256
# vga=773
# VESA framebuffer console @ 800x600x64k
# vga=788
# VESA framebuffer console @ 800x600x32k
# vga=787
# VESA framebuffer console @ 800x600x256
# vga=771
# VESA framebuffer console @ 640x480x64k
# vga=785
# VESA framebuffer console @ 640x480x32k
# vga=784
# VESA framebuffer console @ 640x480x256
# vga=769
# End LILO global section
# Linux bootable partition config begins
image = /boot/vmlinuz
  root 
= /dev/sda1
  label 
Linux
  read
-only
# Linux bootable partition config ends


Ползваш тези редове

image = /boot/vmlinuz
  root = /dev/sda1
  label = Linux
  read-only

Като на мястото на vmlinuz слагаш новото ядро (името му) na root слагаш дяля на който е новото ядро ако е на същия дял остава sda1 после запазваш файла и изпълняваш "lilo"  след това рестартираш (ако лило не ти даде грешка де)
Активен

Не е важно да си добър, важно е да си най добрия!!!

http://www.calculate-linux.ru/
http://www.agilialinux.ru/