Zdraveite.
Imam slednia problem.
Slack 8.0
kernel 2.2.19
Pro comanda reboot ili 
shutdown -r now
 ne se umount-vat sigurno failovite sistemi, za6toto sled
 tova ma6inata se vazstanoviava sled okolo 20-ina min, a
HDD-to e 20GB?
 Ako napravia zarejdane ot FDD-to sas disketa vsi4ko stava za
 po-malko ot minutka..HELP my, kade mi e problema.

Vzemi si proveri logovete 

cat /var/log/message

tam pishe vsichko

Dai poveche info kvo pishe v logovete???

 Zna4i ne6tata se promeniha, ne znam za6to. Ve4e moga sled
reboot da zaredia samo ot FDD. Startira LILO-to, no uvisva.
 /var/log/messages e slednoto, sled reboot i polzvane na
disketa. Pi6a 
boot: mount root=/dev/hda2
i po-natatak niama problem, no ot FDD.
Eto go logfile-to:
*******************
Mar 27 16:07:08 localhost syslogd 1.4.1: restart.
 Mar 27 16:07:09 localhost kernel: klogd 1.4.1, log source =
/proc/kmsg started.
 Mar 27 16:07:09 localhost kernel: Inspecting
/boot/System.map
 Mar 27 16:07:09 localhost kernel: Loaded 9747 symbols from
/boot/System.map.
 Mar 27 16:07:09 localhost kernel: Symbols match kernel
version 2.2.19.
 Mar 27 16:07:09 localhost kernel: Loaded 76 symbols from 4
modules.
 Mar 27 16:07:09 localhost kernel: VFS: Diskquotas version
dquot_6.4.0 initialized
 Mar 27 16:07:09 localhost kernel: Checking 386/387
coupling... OK, FPU using exception 16 error reporting.
 Mar 27 16:07:09 localhost kernel: Checking 'hlt'
instruction... OK.
 Mar 27 16:07:09 localhost kernel: Checking for popad bug...
OK.
 Mar 27 16:07:09 localhost kernel: Linux NET4.0 for Linux
2.2
 Mar 27 16:07:09 localhost kernel: Based upon Swansea
University Computer Society NET3.039
 Mar 27 16:07:09 localhost kernel: NET4: Unix domain sockets
1.0 for Linux NET4.0.
 Mar 27 16:07:09 localhost kernel: NET4: Linux TCP/IP 1.0 for
NET4.0
 Mar 27 16:07:09 localhost kernel: IP Protocols: ICMP, UDP,
TCP, IGMP
Mar 27 16:07:10 localhost kernel: Detected PS/2 Mouse Port.
 Mar 27 16:07:10 localhost kernel: Serial driver version 4.27
with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ enabled
 Mar 27 16:07:10 localhost kernel: ttyS00 at 0x03f8 (irq = 4)
is a 16550A
 Mar 27 16:07:10 localhost kernel: ttyS01 at 0x02f8 (irq = 3)
is a 16550A
 Mar 27 16:07:10 localhost kernel: Real Time Clock Driver
v1.09
 Mar 27 16:07:10 localhost kernel: loop: registered device at
major 7
 Mar 27 16:07:10 localhost kernel: hda: DPEA-31080, 1033MB
w/448kB Cache, CHS=1024/64/63
 Mar 27 16:07:10 localhost kernel: hdb: ST320414A, 19092MB
w/2048kB Cache, CHS=38792/16/63, (U)DMA
 Mar 27 16:07:10 localhost kernel: Uniform CD-ROM driver
Revision: 3.11
 Mar 27 16:07:10 localhost kernel: Floppy drive(s): fd0 is
1.44M
 Mar 27 16:07:10 localhost kernel: FDC 0 is a post-1991
82077
Mar 27 16:07:10 localhost kernel: Partition check:
Mar 27 16:07:10 localhost kernel:  hda: hda1 hda2
 Mar 27 16:07:10 localhost kernel:  hdb: [PTBL] [2434/255/63]
hdb1 hdb2
 Mar 27 16:07:10 localhost kernel: Adding Swap: 133016k
swap-space (priority -1)
 Mar 27 16:07:10 localhost kernel: CSLIP: code copyright 1989
Regents of the University of California
 Mar 27 16:07:10 localhost kernel: PPP: version 2.3.7 (demand
dialling)
 Mar 27 16:07:10 localhost kernel: PPP line discipline
registered.
 Mar 27 16:07:10 localhost kernel: PPP Deflate Compression
module registered
 Mar 27 16:07:10 localhost kernel: rtl8139.c:v1.07 5/6/99
Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/r
tl8139.html
 Mar 27 16:07:10 localhost kernel: eth0: RealTek RTL8139 Fast
Ethernet at 0xd800, IRQ 12, 00:40:f4:27:79:65.
 Mar 27 16:07:10 localhost kernel: eth1: RealTek RTL8139 Fast
Ethernet at 0xd400, IRQ 10, 00:40:f4:27:73:7d.
 Mar 27 16:07:10 localhost sshd[76]: Server listening on
XXX.XX.XX.28 port 22.
Mar 27 16:07:30 localhost login[202]: ROOT LOGIN on `tty1

kvo ma napravi bre 
Kvo ti e sadarzanieto na lilo.conf
a sashto taka na boot.log
 kade si instaliral Lilo v MBR ili v parvata chash na Linux
fs
 kade tochno ti uvisva ? obqsni kakvo tochno pravi kato go
startirash chez lilo bez FDD?

Abe q vzemi si reinstalni MBR

nadqvam se che znaesh kak stava

Eto mi go LILO-to

# LILO configuration file
# generated by 'liloconfig'
#
# Start LILO global section
 lba32 # Allow booting past 1024th cylinder with a recent
BIOS
boot = /dev/hda
#compact        # faster, but won't work on all systems.
delay = 50
# Normal VGA console
vga = normal
# VESA framebuffer console @ 1024x768x64k
# vga=791
# VESA framebuffer console @ 1024x768x32k
# vga=790
# VESA framebuffer console @ 1024x768x256
# vga=773
# VESA framebuffer console @ 800x600x64k
# vga=788
# VESA framebuffer console @ 800x600x32k
# vga=787
# VESA framebuffer console @ 800x600x256
# vga=771
# VESA framebuffer console @ 640x480x64k
# vga=785
# VESA framebuffer console @ 640x480x32k
# vga=784
# VESA framebuffer console @ 640x480x256
# vga=769
# ramdisk = 0     # paranoia setting
# End LILO global section
# Linux bootable partition config begins
image = /boot/vmlinuz
  root = /dev/hda2
  label = Linux
   read-only # Non-UMSDOS filesystems should be mounted
read-only for checking
# Linux bootable partition config ends

 e kak taka shte chete edinstveno NE-dosovski FS, koito
 trqbva da se (u)mountvat ? vij si poslednite dva izpalnqemi
redove!

 Probvah samo da promenia ot kade da mi se zarejda vmlinuz-a
i ne6tata sa O.K. 
Ve4e niamam problemi, samo tova promenih.

# Linux bootable partition config begins
image = /vmlinuz # eto tuk promenih PATH-a
  root = /dev/hda2
  label = Linux
   read-only # Non-UMSDOS filesystems should be mounted
read-only for checking
# Linux bootable partition config ends