[Примерен код]

Нямам firewall а в iptables нищо не съм пипал.Ето и какво ми извади netstat-а.

Примерен код

root@roky:~# netstat -an | grep LISTEN tcp        0      0 83.222.183.126:3333     0.0.0.0:*               LISTEN tcp        0      0 0.0.0.0:37              0.0.0.0:*               LISTEN tcp        0      0 0.0.0.0:587             0.0.0.0:*               LISTEN tcp        0      0 0.0.0.0:113             0.0.0.0:*               LISTEN tcp        0      0 83.222.183.126:1234     0.0.0.0:*               LISTEN tcp        0      0 83.222.183.126:5555     0.0.0.0:*               LISTEN tcp        0      0 83.222.183.126:53       0.0.0.0:*               LISTEN tcp        0      0 0.0.0.0:21              0.0.0.0:*               LISTEN tcp        0      0 192.168.0.1:53          0.0.0.0:*               LISTEN tcp        0      0 10.150.28.113:53        0.0.0.0:*               LISTEN tcp        0      0 127.0.0.1:53            0.0.0.0:*               LISTEN tcp        0      0 0.0.0.0:1337            0.0.0.0:*               LISTEN tcp        0      0 0.0.0.0:25              0.0.0.0:*               LISTEN tcp        0      0 127.0.0.1:953           0.0.0.0:*               LISTEN tcp        0      0 83.222.183.126:4444     0.0.0.0:*               LISTEN tcp6       0      0 :::80                   :::*                    LISTEN tcp6       0      0 :::22                   :::*                    LISTEN tcp6       0      0 ::1:953                 :::*                    LISTEN unix  2      [ ACC ]     STREAM     LISTENING     12854    /var/run/acpid.socket unix  2      [ ACC ]     STREAM     LISTENING     12879    /var/run/dbus/system_bus_socket unix  2      [ ACC ]     STREAM     LISTENING     14197    /dev/gpmctl unix  2      [ ACC ]     STREAM     LISTENING     12905    @/var/run/hald/dbus-vaw55kXRJx unix  2      [ ACC ]     STREAM     LISTENING     12902    @/var/run/hald/dbus-qDSTWH2KM3 unix  2      [ ACC ]     STREAM     LISTENING     21299    /var/run/mysql/mysql.sock

MySQL си върви нормално настройката skip-networking също съм я спрял но просто искам от бозата да мога с SQLyog да си аддвам БД-тата но за тази цел трябва да ми е отворен тоя порт спроед мен...явно не съм обяснил добре и съм ви объркал...а с bind-address е същата работа.

[Примерен код]

Значи според мен проблема е в това че порт 3306 не ми е отворен защото когато използвам nmap не ми показва такъв порт.Ето и кода:

Примерен код

Interesting ports on roky.uk.to (83.222.183.126): Not shown: 1684 closed ports PORT     STATE SERVICE 21/tcp   open  ftp 22/tcp   open  ssh 25/tcp   open  smtp 37/tcp   open  time 53/tcp   open  domain 80/tcp   open  http 113/tcp  open  auth 587/tcp  open  submission 1234/tcp open  hotline 1337/tcp open  waste 3333/tcp open  dec-notes 4444/tcp open  krb524 5555/tcp open  freeciv Nmap finished: 1 IP address (1 host up) scanned in 0.545 seconds

Ще бъда благодарен да ми помогнете с отварянето на порта. '>

[Примерен код]

От ls -ld /home/roky/www извадих това:

Примерен код

drwxr-xr-x 2 roky users 4096 2007-08-15 15:48 /home/roky/www/

От access_log:

Примерен код

83.222.183.126 - - [16/Aug/2007:01:14:10 +0300] "GET /~roky/ HTTP/1.0" 403 334

А от error_log:

Примерен код

[Thu Aug 16 01:14:11 2007] [error] [client 83.222.183.126] client denied by server configuration: /home/roky/www/

Ами аз като гледам по лога явно конфигурацията дава deny а аз не съм слагал никакъв deny...Ще пробвам да махна deny за директориите да видим дали ще тръгне...Явно мода си върви добре щом знае да сервира /home/roky/www но го отхвърля по някаква причина '>

Ясно...от конфиг файла е било не знам само защо досега даваше грешка...направих го

Примерен код

Order allow,deny Allow from all

И взе че стана '> Благодаря ви много момчета чесно...без вашите напътствия едва ли щях да се оправя '>
P.S:Трябва да се науча да гледам логове...въобще не бях се сетил да гледам там '> Благодаря ви още веднъж...дано тази тема е от полза и на някой друг '>

[Цитат]

Цитат (Gaara @ Авг. 15 2007,16:01)

Hapkoc, както винаги е много прав. Според мен процедурата е: 1. chmod o+rx ~/www 2. Не съм много сигурен, но редакцията не трябва ли да е в apache2.conf или в httpd.conf при Apache 1.3? Според мен, ако си с apache2, трябва да е нещо от сорта на Примерен код UserDir www <Directory /home/*/www> AllowOverride FileInfo AuthConfig Limit Options Indexes SymLinksIfOwnerMatch IncludesNoExec </Directory> Има огромна вероятност и да бъркам, но все пак аз така го разбирам.

Ами нищо не стана и конфa промених така както ти си дал и chmod сетнах такъв...нищо и нищо.

[Примерен код]

Модула си е компилиран и си стои в /usr/lib/httpd/modules/
Ето и конфигурационния файл:

Примерен код

# # This is the main Apache HTTP server configuration file.  It contains the # configuration directives that give the server its instructions. # See <URL:http://httpd.apache.org/docs/2.2> for detailed information. # In particular, see # <URL:http://httpd.apache.org/docs/2.2/mod/directives.html> # for a discussion of each configuration directive. # # Do NOT simply read the instructions in here without understanding # what they do.  They're here only as hints or reminders.  If you are unsure # consult the online docs. You have been warned.   # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path.  If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so "/var/log/httpd/foo.log" # with ServerRoot set to "/usr" will be interpreted by the # server as "/usr//var/log/httpd/foo.log". # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # Do not add a slash at the end of the directory path.  If you point # ServerRoot at a non-local disk, be sure to point the LockFile directive # at a local disk.  If you wish to share the same ServerRoot for multiple # httpd daemons, you will need to change at least LockFile and PidFile. # ServerRoot "/usr" # # Listen: Allows you to bind Apache to specific IP addresses and/or # ports, instead of the default. See also the <VirtualHost> # directive. # # Change this to Listen on specific IP addresses as shown below to # prevent Apache from glomming onto all bound IP addresses. # #Listen 12.34.56.78:80 Listen 80 # # Dynamic Shared Object (DSO) Support # # To be able to use the functionality of a module which was built as a DSO you # have to place corresponding `LoadModule' lines at this location so the # directives contained in it are actually available _before_ they are used. # Statically compiled modules (those listed by `httpd -l') do not need # to be loaded here. # # Example: # LoadModule foo_module modules/mod_foo.so # LoadModule authn_file_module lib/httpd/modules/mod_authn_file.so LoadModule authn_dbm_module lib/httpd/modules/mod_authn_dbm.so LoadModule authn_anon_module lib/httpd/modules/mod_authn_anon.so LoadModule authn_dbd_module lib/httpd/modules/mod_authn_dbd.so LoadModule authn_default_module lib/httpd/modules/mod_authn_default.so LoadModule authn_alias_module lib/httpd/modules/mod_authn_alias.so LoadModule authz_host_module lib/httpd/modules/mod_authz_host.so LoadModule authz_groupfile_module lib/httpd/modules/mod_authz_groupfile.so LoadModule authz_user_module lib/httpd/modules/mod_authz_user.so LoadModule authz_dbm_module lib/httpd/modules/mod_authz_dbm.so LoadModule authz_owner_module lib/httpd/modules/mod_authz_owner.so LoadModule authnz_ldap_module lib/httpd/modules/mod_authnz_ldap.so LoadModule authz_default_module lib/httpd/modules/mod_authz_default.so LoadModule auth_basic_module lib/httpd/modules/mod_auth_basic.so LoadModule auth_digest_module lib/httpd/modules/mod_auth_digest.so LoadModule file_cache_module lib/httpd/modules/mod_file_cache.so LoadModule cache_module lib/httpd/modules/mod_cache.so LoadModule disk_cache_module lib/httpd/modules/mod_disk_cache.so LoadModule mem_cache_module lib/httpd/modules/mod_mem_cache.so LoadModule dbd_module lib/httpd/modules/mod_dbd.so LoadModule dumpio_module lib/httpd/modules/mod_dumpio.so LoadModule ext_filter_module lib/httpd/modules/mod_ext_filter.so LoadModule include_module lib/httpd/modules/mod_include.so LoadModule filter_module lib/httpd/modules/mod_filter.so LoadModule deflate_module lib/httpd/modules/mod_deflate.so LoadModule ldap_module lib/httpd/modules/mod_ldap.so LoadModule log_config_module lib/httpd/modules/mod_log_config.so LoadModule log_forensic_module lib/httpd/modules/mod_log_forensic.so LoadModule logio_module lib/httpd/modules/mod_logio.so LoadModule env_module lib/httpd/modules/mod_env.so LoadModule mime_magic_module lib/httpd/modules/mod_mime_magic.so LoadModule cern_meta_module lib/httpd/modules/mod_cern_meta.so LoadModule expires_module lib/httpd/modules/mod_expires.so LoadModule headers_module lib/httpd/modules/mod_headers.so LoadModule ident_module lib/httpd/modules/mod_ident.so LoadModule usertrack_module lib/httpd/modules/mod_usertrack.so LoadModule unique_id_module lib/httpd/modules/mod_unique_id.so LoadModule setenvif_module lib/httpd/modules/mod_setenvif.so LoadModule version_module lib/httpd/modules/mod_version.so LoadModule proxy_module lib/httpd/modules/mod_proxy.so LoadModule proxy_connect_module lib/httpd/modules/mod_proxy_connect.so LoadModule proxy_ftp_module lib/httpd/modules/mod_proxy_ftp.so LoadModule proxy_http_module lib/httpd/modules/mod_proxy_http.so LoadModule proxy_ajp_module lib/httpd/modules/mod_proxy_ajp.so LoadModule proxy_balancer_module lib/httpd/modules/mod_proxy_balancer.so #LoadModule ssl_module lib/httpd/modules/mod_ssl.so LoadModule mime_module lib/httpd/modules/mod_mime.so LoadModule dav_module lib/httpd/modules/mod_dav.so LoadModule status_module lib/httpd/modules/mod_status.so LoadModule autoindex_module lib/httpd/modules/mod_autoindex.so LoadModule asis_module lib/httpd/modules/mod_asis.so LoadModule info_module lib/httpd/modules/mod_info.so LoadModule cgi_module lib/httpd/modules/mod_cgi.so LoadModule dav_fs_module lib/httpd/modules/mod_dav_fs.so LoadModule vhost_alias_module lib/httpd/modules/mod_vhost_alias.so LoadModule negotiation_module lib/httpd/modules/mod_negotiation.so LoadModule dir_module lib/httpd/modules/mod_dir.so LoadModule imagemap_module lib/httpd/modules/mod_imagemap.so LoadModule actions_module lib/httpd/modules/mod_actions.so [B]LoadModule userdir_module lib/httpd/modules/mod_userdir.so[/B] LoadModule alias_module lib/httpd/modules/mod_alias.so LoadModule rewrite_module lib/httpd/modules/mod_rewrite.so <IfModule !mpm_netware_module> # # If you wish httpd to run as a different user or group, you must run # httpd as root initially and it will switch.   # # User/Group: The name (or #number) of the user/group to run httpd as. # It is usually good practice to create a dedicated user and group for # running httpd, as with most system services. # User apache Group apache </IfModule> # 'Main' server configuration # # The directives in this section set up the values used by the 'main' # server, which responds to any requests that aren't handled by a # <VirtualHost> definition.  These values also provide defaults for # any <VirtualHost> containers you may define later in the file. # # All of these directives may appear inside <VirtualHost> containers, # in which case these default settings will be overridden for the # virtual host being defined. # # # ServerAdmin: Your address, where problems with the server should be # e-mailed.  This address appears on some server-generated pages, such # as error documents.  e.g. [EMAIL=admin@your-domain.com]admin@your-domain.com[/EMAIL] # ServerAdmin [EMAIL=Roky@roky.uk.to]Roky@roky.uk.to[/EMAIL] # # ServerName gives the name and port that the server uses to identify itself. # This can often be determined automatically, but we recommend you specify # it explicitly to prevent problems during startup. # # If your host doesn't have a registered DNS name, enter its IP address here. # #ServerName http://www.example.com:80 # # DocumentRoot: The directory out of which you will serve your # documents. By default, all requests are taken from this directory, but # symbolic links and aliases may be used to point to other locations. # DocumentRoot "/srv/httpd/htdocs" # # Each directory to which Apache has access can be configured with respect # to which services and features are allowed and/or disabled in that # directory (and its subdirectories). # # First, we configure the "default" to be a very restrictive set of # features.   # <Directory />     Options FollowSymLinks     AllowOverride None     Order deny,allow     Deny from all </Directory> # # Note that from this point forward you must specifically allow # particular features to be enabled - so if something's not working as # you might expect, make sure that you have specifically enabled it # below. # # # This should be changed to whatever you set DocumentRoot to. # <Directory "/srv/httpd/htdocs">     #     # Possible values for the Options directive are "None", "All",     # or any combination of:     #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews     #     # Note that "MultiViews" must be named *explicitly* --- "Options All"     # doesn't give it to you.     #     # The Options directive is both complicated and important.  Please see     # http://httpd.apache.org/docs/2.2/mod/core.html#options     # for more information.     #     Options Indexes FollowSymLinks     #     # AllowOverride controls what directives may be placed in .htaccess files.     # It can be "All", "None", or any combination of the keywords:     #   Options FileInfo AuthConfig Limit     #     AllowOverride None     #     # Controls who can get stuff from this server.     #     Order allow,deny     Allow from all </Directory> # # DirectoryIndex: sets the file that Apache will serve if a directory # is requested. # <IfModule dir_module>     DirectoryIndex index.html index.htm index.php </IfModule> # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <FilesMatch "^\.ht">     Order allow,deny     Deny from all     Satisfy All </FilesMatch> # # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here.  If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog /var/log/httpd/error_log # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn <IfModule log_config_module>     #     # The following directives define some format nicknames for use with     # a CustomLog directive (see below).     #     LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined     LogFormat "%h %l %u %t \"%r\" %>s %b" common     <IfModule logio_module>       # You need to enable mod_logio.c to use %I and %O       LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio     </IfModule>     #     # The location and format of the access logfile (Common Logfile Format).     # If you do not define any access logfiles within a <VirtualHost>     # container, they will be logged here.  Contrariwise, if you *do*     # define per-<VirtualHost> access logfiles, transactions will be     # logged therein and *not* in this file.     #     CustomLog /var/log/httpd/access_log common     #     # If you prefer a logfile with access, agent, and referer information     # (Combined Logfile Format) you can use the following directive.     #     #CustomLog /var/log/httpd/access_log combined </IfModule> <IfModule alias_module>     #     # Redirect: Allows you to tell clients about documents that used to     # exist in your server's namespace, but do not anymore. The client     # will make a new request for the document at its new location.     # Example:     # Redirect permanent /foo http://www.example.com/bar     #     # Alias: Maps web paths into filesystem paths and is used to     # access content that does not live under the DocumentRoot.     # Example:     # Alias /webpath /full/filesystem/path     #     # If you include a trailing / on /webpath then the server will     # require it to be present in the URL.  You will also likely     # need to provide a <Directory> section to allow access to     # the filesystem path.     #     # ScriptAlias: This controls which directories contain server scripts.     # ScriptAliases are essentially the same as Aliases, except that     # documents in the target directory are treated as applications and     # run by the server when requested rather than as documents sent to the     # client.  The same rules about trailing "/" apply to ScriptAlias     # directives as to Alias.     #     ScriptAlias /cgi-bin/ "/srv/httpd/cgi-bin/" </IfModule> <IfModule cgid_module>     #     # ScriptSock: On threaded servers, designate the path to the UNIX     # socket used to communicate with the CGI daemon of mod_cgid.     #     #Scriptsock /var/run/httpd/cgisock </IfModule> # # "/srv/httpd/cgi-bin" should be changed to whatever your ScriptAliased # CGI directory exists, if you have that configured. # <Directory "/srv/httpd/cgi-bin">     AllowOverride None     Options None     Order allow,deny     Allow from all </Directory> # # DefaultType: the default MIME type the server will use for a document # if it cannot otherwise determine one, such as from filename extensions. # If your server contains mostly text or HTML documents, "text/plain" is # a good value.  If most of your content is binary, such as applications # or images, you may want to use "application/octet-stream" instead to # keep browsers from trying to display binary files as though they are # text. # DefaultType text/plain <IfModule mime_module>     #     # TypesConfig points to the file containing the list of mappings from     # filename extension to MIME-type.     #     TypesConfig /etc/httpd/mime.types     #     # AddType allows you to add to or override the MIME configuration     # file specified in TypesConfig for specific file types.     #     #AddType application/x-gzip .tgz     #     # AddEncoding allows you to have certain browsers uncompress     # information on the fly. Note: Not all browsers support this.     #     #AddEncoding x-compress .Z     #AddEncoding x-gzip .gz .tgz     #     # If the AddEncoding directives above are commented-out, then you     # probably should define those extensions to indicate media types:     #     AddType application/x-compress .Z     AddType application/x-gzip .gz .tgz     #     # AddHandler allows you to map certain file extensions to "handlers":     # actions unrelated to filetype. These can be either built into the server     # or added with the Action directive (see below)     #     # To use CGI scripts outside of ScriptAliased directories:     # (You will also need to add "ExecCGI" to the "Options" directive.)     #     #AddHandler cgi-script .cgi     # For type maps (negotiated resources):     #AddHandler type-map var     #     # Filters allow you to process content before it is sent to the client.     #     # To parse .shtml files for server-side includes (SSI):     # (You will also need to add "Includes" to the "Options" directive.)     #     #AddType text/html .shtml     #AddOutputFilter INCLUDES .shtml </IfModule> # # The mod_mime_magic module allows the server to use various hints from the # contents of the file itself to determine its type.  The MIMEMagicFile # directive tells the module where the hint definitions are located. # #MIMEMagicFile /etc/httpd/magic # # Customizable error responses come in three flavors: # 1) plain text 2) local redirects 3) external redirects # # Some examples: #ErrorDocument 500 "The server made a boo boo." #ErrorDocument 404 /missing.html #ErrorDocument 404 "/cgi-bin/missing_handler.pl" #ErrorDocument 402 http://www.example.com/subscription_info.html # # # EnableMMAP and EnableSendfile: On systems that support it, # memory-mapping or the sendfile syscall is used to deliver # files.  This usually improves server performance, but must # be turned off when serving from networked-mounted # filesystems or if support for these functions is otherwise # broken on your system. # #EnableMMAP off #EnableSendfile off # Supplemental configuration # # The configuration files in the /etc/httpd/extra/ directory can be # included to add extra features or to modify the default configuration of # the server, or you may simply copy their contents here and change as # necessary. # Server-pool management (MPM specific) #Include /etc/httpd/extra/httpd-mpm.conf # Multi-language error messages #Include /etc/httpd/extra/httpd-multilang-errordoc.conf # Fancy directory listings Include /etc/httpd/extra/httpd-autoindex.conf # Language settings #Include /etc/httpd/extra/httpd-languages.conf # User home directories [B]Include /etc/httpd/extra/httpd-userdir.conf[/B] # Real-time info on requests and configuration #Include /etc/httpd/extra/httpd-info.conf # Virtual hosts #Include /etc/httpd/extra/httpd-vhosts.conf # Local access to the Apache HTTP Server Manual #Include /etc/httpd/extra/httpd-manual.conf # Distributed authoring and versioning (WebDAV) #Include /etc/httpd/extra/httpd-dav.conf # Various default settings Include /etc/httpd/extra/httpd-default.conf # Secure (SSL/TLS) connections #Include /etc/httpd/extra/httpd-ssl.conf # # Note: The following must must be present to support #       starting without SSL on platforms with no /dev/random equivalent #       but a statically compiled-in mod_ssl. # <IfModule ssl_module> SSLRandomSeed startup builtin SSLRandomSeed connect builtin </IfModule> # Uncomment the following line to enable PHP: # Include /etc/httpd/mod_php.conf # Uncomment the following lines to enable svn support: # #LoadModule dav_svn_module lib/httpd/modules/mod_dav_svn.so #LoadModule authz_svn_module lib/httpd/modules/mod_authz_svn.so

И аз мисля че е някаква миниатюрна грешка щом да съм прегледал всичко милион пъти и нищо да не съм намерил '> А относно httpd-userdir.conf по дефолт си беше същия аз просто на 2 места смених public_html с www, това е.

Ами по-принцип това www по дефолт си е public_html папката но аз я преименувах на www.Заредил съм модула userdir в httpd.conf-a,Настроил съм httpd-userdir.conf и съм разкоментирал в httpd.conf линията с Include за httpd-userdir.conf.Сетнал съм chmod 755 на папката www в директорията на юзъра и пак ми дава 403 Forbidden.Затова се обърнах към вас.Не че не съм пробвал сам....

П.П:http://IP/~user си е точно така.

След като написах темата веднага се захванах с оправянето на кирилицата и я едитнах веднага щом го оправих.Не знам как след 2 часа ти ми пишеш че е на шлиокавица след като я редактирах максимум след 30 минути '> Аз се извиних и гледах да оправя грешката колкото се може по-бързо а ти веднага ме нападаш грубиянино '> (последното беше на майтап) Както и да е темата си е на български.Чакам само помощ...ако не я намеря сам до тогава.Ако това стане ще напиша как съм оправил проблема поне след мен ако има такива проблеми хората да видят за какво идва дума '>

[Примерен код]

Въпроса ми е можете ли да ми помогнете с конфигурирането на httpd , защото аз се изчерпах вече...със Slackware 12 съм.Ето го и съдържанието на httpd-userdir.conf :

Примерен код

# Settings for user home directories # # Required module: mod_userdir # # UserDir: The name of the directory that is appended onto a user's home # directory if a ~user request is received.  Note that you must also set # the default access control for these directories, as in the example below. # UserDir www # # Control access to UserDir directories.  The following is an example # for a site where these directories are restricted to read-only. # <Directory /home/*/www>     AllowOverride FileInfo AuthConfig Limit Indexes     Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec     <Limit GET POST OPTIONS>         Order allow,deny         Allow from all     </Limit>     <LimitExcept GET POST OPTIONS>         Order deny,allow         Deny from all     </LimitExcept> </Directory>

Папката е с chmod 755 а ми дава грешка 403 Forbidden.
Благодаря ви предварително.

Редактирано съгласно т.7. от правилата на форума. Темата е затворена и преместена в раздел "Кошче"!

Не съм сигурен дали това е раздела.Дано да не съм го объркал...ако е така извинете ме  '> Та искам да попитам от къде може да идва този проблем.Когато пусна машината (или я рестартирам) в началото използва 50% от паметта си, а когато работи цял ден се вдига на 98%.Мога и снимки да ви покажа:
С 5 минути ъптайм:
http://phreebsd.org/~roky/files/tnd3mnmawrzc0mkdnlmy.jpg
С някаде 23 часа ъптайм:
http://phreebsd.org/~roky/files/ygzwj2mxmgkkyytr2yyo.jpg
За тези 23 часа са използвани само Firefox и JuK.Няма други акаунти на машината и няма нищо пуснато допълнително.Дано да сте ми разбрали проблема '>

[Примерен код]

Ами php-то ръгнах да сменям защото пишеше че версията е за Apache2.
За това че работи апачето си работи знам но не е като обикновенно апаче с иконките и информацията отдолу за версията на сървъра(версия и модове).
А от лога виждам само това за phpinfo.php

Примерен код

[Wed Apr 25 07:39:50 2007] [notice] Apache/1.3.37 (Unix) PHP/4.4.4 configured -- resuming normal operations [Wed Apr 25 07:39:50 2007] [notice] Accept mutex: sysvsem (Default: sysvsem) [Wed Apr 25 07:43:02 2007] [error] [client 212.36.0.70] File does not exist: /var/www/htdocs// [Wed Apr 25 07:43:02 2007] [error] [client 212.36.0.70] File does not exist: /var/www/htdocs// [Wed Apr 25 08:22:48 2007] [error] [client 127.0.0.1] File does not exist: /var/www/htdocs/favicon.ico [Wed Apr 25 08:22:52 2007] [error] PHP Warning:  Unknown(/var/www/htdocs/phpinfo.php): failed to open stream: Permission denied in Unknown on line 0 [Wed Apr 25 08:22:52 2007] [error] PHP Warning:  (null)() [<a href='function.include'>function.include</a>]: Failed opening '/var/www/htdocs/phpinfo.php' for inclusion (include_path='.:/usr/lib/php') in Unknown on line 0 [Wed Apr 25 08:22:57 2007] [error] PHP Warning:  Unknown(/var/www/htdocs/phpinfo.php): failed to open stream: Permission denied in Unknown on line 0 [Wed Apr 25 08:22:57 2007] [error] PHP Warning:  (null)() [<a href='function.include'>function.include</a>]: Failed opening '/var/www/htdocs/phpinfo.php' for inclusion (include_path='.:/usr/lib/php') in Unknown on line 0

Някакви идеи за решаването на тези проблеми?И също искам да попитам има ли някакъв начин за деинсталация на пакети?Благодаря предварително.

Използвам SlackWare 11.0.При инсталация зададох full install което значи че ми инсталира apache 1.3.37 и някаква версия на mysql не е важно коя.Както и да е mysql го оправих но исках да имам и php.Затова иснталирах apache2.2.4 и спрях apache-то на SlackWare-a и пуснах новото apache,но възникна един проблем.Когато отворя localhost вида на уеб сървъра тотално се промени.Дори не мога да видя долу информацията за версията на Apache и дали въобще php работи.Дано да съм се изразил ясно.Дори ще прикача снимка за да видите как изглежда всичко '>
http://phreebsd.org/~roky/viewer.php?file=dugdzjmz3yzwnnduzid5.jpg

Прочети и тук http://shoutcast.com/ '>

Пробвай mkportal.Вземи си го от mkportal.it а в действие можеш да го видиш да речем тук http://d2hackers.org