Титла: Отново за SlackWare 10 и звука
Публикувано от: ma3x_Virus в Oct 05, 2004, 14:45
Имам звукова карта Creative Live 5.1 и тунер AverMedia TV Studio 203. Пуснах alsaconf и ми откри звуковата карта, но след като пусна alsamixer отгоре за звука ми пише BT878, koeto e na tunera. След като се опитам да пейна нещо ми пише Cannot open device /dev/snd/pciC0D0p и няма нищо?
Дайте някакво предложение да се разреши този проблем. Приложил съм и някои файлове по долу.
dmesg
Linux version 2.4.26 (root@tree) (gcc version 3.3.4) #6 Mon Jun 14 19
7:27 PDT 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=SlackWare ro root=303
Initializing CPU#0
Detected 1466.756 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 2929.45 BogoMIPS
Memory: 515324k/524224k available (1844k kernel code, 8512k reserved, 618k data, 120k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000
CPU: AMD Athlon™ XP 1700+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router default [1106/3147] at 00:11.0
PCI: Hardcoded IRQ 14 for device 00:11.1
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Journalled Block Device driver loaded
Detected PS/2 Mouse Port.
pty: 512 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.10f
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 7777K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:11.1
PCI: Hardcoded IRQ 14 for device 00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci00:11.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio
hda: MAXTOR 6L040J2, ATA DISK drive
hdb: HL-DT-ST GCE-8480B, ATAPI CD/DVD-ROM drive
blk: queue c03b3360, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 78177792 sectors (40027 MB) w/1818KiB Cache, CHS=4866/255/63, UDMA(133)
hdb: attached ide-cdrom driver.
hdb: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Partition check:
hda: hda1 hda2 hda3
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
8regs : 2102.800 MB/sec
32regs : 1401.200 MB/sec
pIII_sse : 2538.800 MB/sec
pII_mmx : 3432.800 MB/sec
p5_mmx : 4386.000 MB/sec
raid5: using function: pIII_sse (2538.800 MB/sec)
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
LVM version 1.0.8(17/11/2003)
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 120k freed
apm: BIOS not found.
Linux agpgart interface v0.99 © Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected Via Apollo Pro KT266 chipset
agpgart: AGP aperture is 256M @ 0xe0000000
Creative EMU10K1 PCI Audio Driver, version 0.20, 17:550 Jun 13 2004
emu10k1: EMU10K1 rev 7 model 0x8064 found, IO at 0xe800-0xe81f, IRQ 5
ac97_codec: AC97 Audio codec, id: 0x8384:0x7608 (SigmaTel STAC9708)
emu10k1: SBLive! 5.1 card detected
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
NTFS driver v1.1.22 [Flags: R/O MODULE]
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
uhci.c: USB Universal Host Controller Interface driver v1.1
uhci.c: USB UHCI at I/O 0xe000, IRQ 10
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
Linux video capture interface: v1.00
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-algo-bit.o: i2c bit algorithm module
bttv: driver version 0.7.108 loaded
bttv: using 4 buffers with 2080k (8320k total) for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 00:0c.0, irq: 11, latency: 32, mmio: 0xdddff000
bttv0: detected: AVerMedia TVPhone98 [card=41], PCI subsystem ID is 1461003
bttv0: using: AVerMedia TVPhone 98 [card=41,autodetected]
i2c-core.o: adapter bt848 #0 registered as adapter 0.
bttv0: Avermedia eeprom[0x0a97]: tuner=5 radio:yes remote control:yes
bttv0: using tuner=5
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951),ta8874z
i2c-core.o: driver generic i2c audio driver registered.
tvaudio: found tda9840 @ 0x84
i2c-core.o: client [tda9840] registered to adapter [bt848 #0](pos. 0).
i2c-core.o: driver i2c TV tuner driver registered.
tuner: chip found @ 0xc2
tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
i2c-core.o: client [Philips PAL_BG (FI1216 and comp] registered to adapter [bt848 #0](pos. 1).
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
gameport0: Emu10k1 Gameport at 0xe400 size 8 speed 1217 kHz
hub.c: new USB device 00:11.2-1, assigned address 2
usb.c: USB device 2 (vend/prod 0x46d/0xc00e) is not claimed by any active driver.
usb.c: registered new driver usbmouse
input0: Logitech USB-PS/2 Optical Mouse on usb1:2.0
usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
ALSA mixer_oss.c:1261: unable to register OSS mixer device 0
ALSA pcm_oss.c:2419: unable to register OSS PCM device 0
lsmod
Module Size Used by Not tainted
usb-storage 66176 0 (unused)
snd-pcm-oss 37736 0 (unused)
snd-mixer-oss 12504 0 [snd-pcm-oss]
keybdev 2052 0 (unused)
mousedev 4212 0 (unused)
hid 21220 0 (unused)
usbmouse 2040 0 (unused)
input 3200 0 [keybdev mousedev hid usbmouse]
snd-emu10k1 62920 0
snd-hwdep 4804 0 [snd-emu10k1]
snd-util-mem 1136 0 [snd-emu10k1]
snd-ac97-codec 49500 0 [snd-emu10k1]
snd-rawmidi 12740 0 [snd-emu10k1]
snd-seq-device 3888 0 [snd-emu10k1 snd-rawmidi]
emu10k1-gp 1352 0 (unused)
gameport 1420 0 [emu10k1-gp]
tuner 10184 1 (autoclean)
tvaudio 13480 1 (autoclean)
bttv 94656 0 (unused)
i2c-algo-bit 7144 1 [bttv]
i2c-core 12804 0 [tuner tvaudio bttv i2c-algo-bit]
videodev 5952 3 [bttv]
snd-bt87x 5192 0
snd-pcm 56072 0 [snd-pcm-oss snd-emu10k1 snd-bt87x]
snd-timer 13604 0 [snd-pcm]
snd-page-alloc 6328 0 [snd-emu10k1 snd-bt87x snd-pcm]
snd 30852 0 [snd-pcm-oss snd-mixer-oss snd-emu10k1 snd-hwdep snd-util-mem snd-ac97-codec snd-rawmidi snd-seq-device snd-bt87x snd-pcm snd-timer]
soundcore 3396 10 [bttv snd]
uhci 24444 0 (unused)
usbcore 59308 1 [usb-storage hid usbmouse uhci]
ntfs 51424 2 (autoclean)
ide-scsi 9328 0
agpgart 43940 0 (unused)
pcimodules
usb-uhci
uhci
via-ircc
snd-bt87x
btaudio
bttv
emu10k1-gp
snd-emu10k1
emu10k1
Извинявам се за дългия постинг, но не намерих начин за атач на файловете.
Дайте някакво предложение да се разреши този проблем. Приложил съм и някои файлове по долу.
dmesg
Linux version 2.4.26 (root@tree) (gcc version 3.3.4) #6 Mon Jun 14 19
7:27 PDT 2004BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=SlackWare ro root=303
Initializing CPU#0
Detected 1466.756 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 2929.45 BogoMIPS
Memory: 515324k/524224k available (1844k kernel code, 8512k reserved, 618k data, 120k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000
CPU: AMD Athlon™ XP 1700+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router default [1106/3147] at 00:11.0
PCI: Hardcoded IRQ 14 for device 00:11.1
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Journalled Block Device driver loaded
Detected PS/2 Mouse Port.
pty: 512 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.10f
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 7777K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:11.1
PCI: Hardcoded IRQ 14 for device 00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci00:11.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio
hda: MAXTOR 6L040J2, ATA DISK drive
hdb: HL-DT-ST GCE-8480B, ATAPI CD/DVD-ROM drive
blk: queue c03b3360, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 78177792 sectors (40027 MB) w/1818KiB Cache, CHS=4866/255/63, UDMA(133)
hdb: attached ide-cdrom driver.
hdb: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Partition check:
hda: hda1 hda2 hda3
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
8regs : 2102.800 MB/sec
32regs : 1401.200 MB/sec
pIII_sse : 2538.800 MB/sec
pII_mmx : 3432.800 MB/sec
p5_mmx : 4386.000 MB/sec
raid5: using function: pIII_sse (2538.800 MB/sec)
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
LVM version 1.0.8(17/11/2003)
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 120k freed
apm: BIOS not found.
Linux agpgart interface v0.99 © Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected Via Apollo Pro KT266 chipset
agpgart: AGP aperture is 256M @ 0xe0000000
Creative EMU10K1 PCI Audio Driver, version 0.20, 17:55
0 Jun 13 2004emu10k1: EMU10K1 rev 7 model 0x8064 found, IO at 0xe800-0xe81f, IRQ 5
ac97_codec: AC97 Audio codec, id: 0x8384:0x7608 (SigmaTel STAC9708)
emu10k1: SBLive! 5.1 card detected
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
NTFS driver v1.1.22 [Flags: R/O MODULE]
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
uhci.c: USB Universal Host Controller Interface driver v1.1
uhci.c: USB UHCI at I/O 0xe000, IRQ 10
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
Linux video capture interface: v1.00
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-algo-bit.o: i2c bit algorithm module
bttv: driver version 0.7.108 loaded
bttv: using 4 buffers with 2080k (8320k total) for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 00:0c.0, irq: 11, latency: 32, mmio: 0xdddff000
bttv0: detected: AVerMedia TVPhone98 [card=41], PCI subsystem ID is 1461
003bttv0: using: AVerMedia TVPhone 98 [card=41,autodetected]
i2c-core.o: adapter bt848 #0 registered as adapter 0.
bttv0: Avermedia eeprom[0x0a97]: tuner=5 radio:yes remote control:yes
bttv0: using tuner=5
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951),ta8874z
i2c-core.o: driver generic i2c audio driver registered.
tvaudio: found tda9840 @ 0x84
i2c-core.o: client [tda9840] registered to adapter [bt848 #0](pos. 0).
i2c-core.o: driver i2c TV tuner driver registered.
tuner: chip found @ 0xc2
tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
i2c-core.o: client [Philips PAL_BG (FI1216 and comp] registered to adapter [bt848 #0](pos. 1).
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
gameport0: Emu10k1 Gameport at 0xe400 size 8 speed 1217 kHz
hub.c: new USB device 00:11.2-1, assigned address 2
usb.c: USB device 2 (vend/prod 0x46d/0xc00e) is not claimed by any active driver.
usb.c: registered new driver usbmouse
input0: Logitech USB-PS/2 Optical Mouse on usb1:2.0
usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
ALSA mixer_oss.c:1261: unable to register OSS mixer device 0
ALSA pcm_oss.c:2419: unable to register OSS PCM device 0
lsmod
Module Size Used by Not tainted
usb-storage 66176 0 (unused)
snd-pcm-oss 37736 0 (unused)
snd-mixer-oss 12504 0 [snd-pcm-oss]
keybdev 2052 0 (unused)
mousedev 4212 0 (unused)
hid 21220 0 (unused)
usbmouse 2040 0 (unused)
input 3200 0 [keybdev mousedev hid usbmouse]
snd-emu10k1 62920 0
snd-hwdep 4804 0 [snd-emu10k1]
snd-util-mem 1136 0 [snd-emu10k1]
snd-ac97-codec 49500 0 [snd-emu10k1]
snd-rawmidi 12740 0 [snd-emu10k1]
snd-seq-device 3888 0 [snd-emu10k1 snd-rawmidi]
emu10k1-gp 1352 0 (unused)
gameport 1420 0 [emu10k1-gp]
tuner 10184 1 (autoclean)
tvaudio 13480 1 (autoclean)
bttv 94656 0 (unused)
i2c-algo-bit 7144 1 [bttv]
i2c-core 12804 0 [tuner tvaudio bttv i2c-algo-bit]
videodev 5952 3 [bttv]
snd-bt87x 5192 0
snd-pcm 56072 0 [snd-pcm-oss snd-emu10k1 snd-bt87x]
snd-timer 13604 0 [snd-pcm]
snd-page-alloc 6328 0 [snd-emu10k1 snd-bt87x snd-pcm]
snd 30852 0 [snd-pcm-oss snd-mixer-oss snd-emu10k1 snd-hwdep snd-util-mem snd-ac97-codec snd-rawmidi snd-seq-device snd-bt87x snd-pcm snd-timer]
soundcore 3396 10 [bttv snd]
uhci 24444 0 (unused)
usbcore 59308 1 [usb-storage hid usbmouse uhci]
ntfs 51424 2 (autoclean)
ide-scsi 9328 0
agpgart 43940 0 (unused)
pcimodules
usb-uhci
uhci
via-ircc
snd-bt87x
btaudio
bttv
emu10k1-gp
snd-emu10k1
emu10k1
Извинявам се за дългия постинг, но не намерих начин за атач на файловете.
Титла: Отново за SlackWare 10 и звука
Публикувано от: Agent_SMITH в Oct 05, 2004, 17:15
Не познавам Слак, но тези редове
ALSA mixer_oss.c:1261: unable to register OSS mixer device 0 : 0
ALSA pcm_oss.c:2419: unable to register OSS PCM device 0 : 0
ме навеждат на мисълта, че нещо си оплескал OSS емулацията на ALSA, или пък си ги пуснал и двете? Незнам...
Дай инфо с кое ядро си, ако си го компилирал ти, ALSA модул ли е, или е интегрирано, пуснал ли си OSS емулация...
Достъпа до /dev/нещо-си : ами погледни правата? Има ли потребителя права да ползва устройството [man chmod] ?
Давай инфо, ще помагаме
Успех
EDIT: А ЕТО ТАЗИ СТАТИЯ прочете ли я?
ALSA mixer_oss.c:1261: unable to register OSS mixer device 0 : 0
ALSA pcm_oss.c:2419: unable to register OSS PCM device 0 : 0
ме навеждат на мисълта, че нещо си оплескал OSS емулацията на ALSA, или пък си ги пуснал и двете? Незнам...
Дай инфо с кое ядро си, ако си го компилирал ти, ALSA модул ли е, или е интегрирано, пуснал ли си OSS емулация...
Достъпа до /dev/нещо-си : ами погледни правата? Има ли потребителя права да ползва устройството [man chmod] ?
Давай инфо, ще помагаме
Успех
EDIT: А ЕТО ТАЗИ СТАТИЯ прочете ли я?
Титла: Отново за SlackWare 10 и звука
Публикувано от: uDuoT в Oct 05, 2004, 20:51
zashto ne probvash sys
modprobe driver-a na kartata?
modprobe driver-a na kartata?
Титла: Отново за SlackWare 10 и звука
Публикувано от: dafo в Oct 05, 2004, 21:20
Това заради алсата, която качва bt драйвери преди тези за креатива. Направи така, че да не зарежда snd-bt87x, като го прибавиш примерно в /etc/hotplug/blacklist
Титла: Отново за SlackWare 10 и звука
Публикувано от: ma3x_Virus в Oct 06, 2004, 10:06
Нищо ново освен драйвери за нВидиа не сък качвал над стандартната Слак10 дистрибуция. Ядрото ми е 2.6.х. Това с грешките се в Alsa OSS се появява когато разкоменторам реда от rc.modules - modprobe snd-emu10k1. Тогава ми тръгва звука в KDE след като избера от контрол центъра за звука OSS. Но за Alsa-та ми казва че не може да се свърже със сървър и. Ако не разкоментирам този ред нямам нито чисто OSS нито Alsa.
P.S. Статията я прочетох но не намерих полезно инфо за моя проблем.
P.S. Статията я прочетох но не намерих полезно инфо за моя проблем.
Титла: Отново за SlackWare 10 и звука
Публикувано от: ma3x_Virus в Oct 07, 2004, 11:42
| Цитат (dafo @ Окт. 05 2004,22:20) |
| Това заради алсата, която качва bt драйвери преди тези за креатива. Направи така, че да не зарежда snd-bt87x, като го прибавиш примерно в /etc/hotplug/blacklist |
Може ли малко повече инфо за това как да не зарежда snd-bt87x.?
Как да спра да не зарежда стандартния OSS?
Титла: Отново за SlackWare 10 и звука
Публикувано от: ma3x_Virus в Oct 07, 2004, 12:11
Явно Slackware 10 има пробелем с Alsa+SBLive+bt878
http://www.linuxquestions.org/questions/history/226027
ще видя дали това ще реши при мен проблема.
http://www.linuxquestions.org/questions/history/226027
ще видя дали това ще реши при мен проблема.
Титла: Отново за SlackWare 10 и звука
Публикувано от: zazzko в Oct 07, 2004, 12:15
В Slackware 10 OSS не е компилиран в ядрото. Това което виждаш е емулацията която ALSA прави. Най-лесния начин да спреш зареждането на един модул е да му махнеш правата за четене (или да го изтриеш, което не е добър вариант). Но не виждам причина да го правиш. snd-pcm-oss е зареден нормално. Това че не може да регистрира OSS може да идва и от това, че не си инсталирал пакетите са OSS емулация (намираща се в пакета alsa-oss).
Титла: Отново за SlackWare 10 и звука
Публикувано от: Kasho в Oct 08, 2004, 01:35
отвори си един XMMS и му задай да свири през ALSA. И погледни из настройките на модула за нещо такова "hw:0,1". Ако проработи, същото го препиши в настройките на aRts за да имаш звук в KDE.
Друг вариант който можеш да пробваш(аз не съм го тествал) :
В /etc/modules.conf или modprobe.conf :
alias snd-slot-0 snd-emu10k1
Не съм сигурен за точния синтаксис,нека по-знаещите кажат.
Друг вариант който можеш да пробваш(аз не съм го тествал) :
В /etc/modules.conf или modprobe.conf :
alias snd-slot-0 snd-emu10k1
Не съм сигурен за точния синтаксис,нека по-знаещите кажат.
Титла: Отново за SlackWare 10 и звука
Публикувано от: ma3x_Virus в Oct 08, 2004, 09:52
| Цитат (Kasho @ Окт. 08 2004,02:35) |
| отвори си един XMMS и му задай да свири през ALSA. И погледни из настройките на модула за нещо такова "hw:0,1". Ако проработи, същото го препиши в настройките на aRts за да имаш звук в KDE. Друг вариант който можеш да пробваш(аз не съм го тествал) : В /etc/modules.conf или modprobe.conf : alias snd-slot-0 snd-emu10k1 Не съм сигурен за точния синтаксис,нека по-знаещите кажат. |
Благодаря ти за мнението. Но при мен това
http://www.linuxquestions.org/questions/history/226027
свърши работа