6
|
Linux секция за начинаещи / Настройка на хардуер / Re: Проблем с HDD maybe?
|
-: Oct 12, 2010, 14:08
|
@backtolife - ssh secure shell се казва програмката  hdparm -tT /dev/sda
/dev/sda: Timing cached reads: 11110 MB in 2.00 seconds = 5561.85 MB/sec Timing buffered disk reads: 222 MB in 3.02 seconds = 73.48 MB/sec [root@dark ~]# smartctl --all /dev/sda smartctl version 5.38 [x86_64-redhat-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION === Model Family: Western Digital Caviar Second Generation Serial ATA family Device Model: WDC WD2500AAJS-00M0A0 Serial Number: WD-WMAV20635028 Firmware Version: 01.03E01 User Capacity: 250,059,350,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Tue Oct 12 14:07:12 2010 EEST SMART support is: Available - device has SMART capability. SMART support is: Enabled
=== START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED
General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (5580) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 68) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Feature Control supported. SCT Data Table supported.
SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 135 135 021 Pre-fail Always - 4233 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 19 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 081 081 000 Old_age Always - 14567 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 17 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 14 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 19 194 Temperature_Celsius 0x0022 115 093 000 Old_age Always - 28 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
SMART Error Log Version: 1 No Errors Logged
SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 535 -
SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|
|
7
|
Linux секция за начинаещи / Настройка на хардуер / Re: Проблем с HDD maybe?
|
-: Oct 12, 2010, 11:51
|
/var/log/messages Oct 10 04:41:54 machine rsyslogd: [origin software="rsyslogd" swVersion="3.22.1" x-pid="2125" x-info="http://www.rsyslog.com"] (re)start Oct 10 21:32:15 machine pcscd: winscard.c:302:SCardConnect() Reader E-Gate 0 0 Not Found Oct 10 21:32:15 machine pcscd: winscard.c:302:SCardConnect() Reader E-Gate 0 0 Not Found Oct 10 21:32:15 machine pcscd: winscard.c:302:SCardConnect() Reader E-Gate 0 0 Not Found Oct 10 21:32:15 machine pcscd: winscard.c:302:SCardConnect() Reader E-Gate 0 0 Not Found Oct 11 00:05:55 machine pcscd: winscard.c:302:SCardConnect() Reader E-Gate 0 0 Not Found Oct 11 00:05:55 machine pcscd: winscard.c:302:SCardConnect() Reader E-Gate 0 0 Not Found Oct 11 00:05:55 machine pcscd: winscard.c:302:SCardConnect() Reader E-Gate 0 0 Not Found Oct 11 00:05:55 machine pcscd: winscard.c:302:SCardConnect() Reader E-Gate 0 0 Not Found Oct 11 05:00:42 machine pcscd: winscard.c:302:SCardConnect() Reader E-Gate 0 0 Not Found Oct 11 05:00:42 machine pcscd: winscard.c:302:SCardConnect() Reader E-Gate 0 0 Not Found Oct 11 05:00:42 machine pcscd: winscard.c:302:SCardConnect() Reader E-Gate 0 0 Not Found Oct 11 05:00:42 machine pcscd: winscard.c:302:SCardConnect() Reader E-Gate 0 0 Not Found Oct 11 06:14:58 machine kernel: ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Oct 11 06:14:58 machine kernel: ata2.00: BMDMA stat 0x24 Oct 11 06:14:58 machine kernel: ata2.00: cmd 25/00:18:81:97:a7/00:00:10:00:00/e0 tag 0 dma 12288 in Oct 11 06:14:58 machine kernel: res 51/40:00:82:97:a7/40:00:10:00:00/e0 Emask 0x9 (media error) Oct 11 06:14:58 machine kernel: ata2.00: status: { DRDY ERR } Oct 11 06:14:58 machine kernel: ata2.00: error: { UNC } Oct 11 06:14:58 machine kernel: ata2.00: configured for UDMA/133 Oct 11 06:14:58 machine kernel: ata2: EH complete Oct 11 06:15:00 machine kernel: ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Oct 11 06:15:00 machine kernel: ata2.00: BMDMA stat 0x24 Oct 11 06:15:00 machine kernel: ata2.00: cmd 25/00:18:81:97:a7/00:00:10:00:00/e0 tag 0 dma 12288 in Oct 11 06:15:00 machine kernel: res 51/40:00:82:97:a7/40:00:10:00:00/e0 Emask 0x9 (media error) Oct 11 06:15:00 machine kernel: ata2.00: status: { DRDY ERR } Oct 11 06:15:00 machine kernel: ata2.00: error: { UNC } Oct 11 06:15:00 machine kernel: ata2.00: configured for UDMA/133 Oct 11 06:15:00 machine kernel: ata2: EH complete Oct 11 06:15:03 machine kernel: ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Oct 11 06:15:03 machine kernel: ata2.00: BMDMA stat 0x24 Oct 11 06:15:03 machine kernel: ata2.00: cmd 25/00:18:81:97:a7/00:00:10:00:00/e0 tag 0 dma 12288 in Oct 11 06:15:03 machine kernel: res 51/40:00:82:97:a7/40:00:10:00:00/e0 Emask 0x9 (media error) Oct 11 06:15:03 machine kernel: ata2.00: status: { DRDY ERR } Oct 11 06:15:03 machine kernel: ata2.00: error: { UNC } Oct 11 06:15:03 machine kernel: ata2.00: configured for UDMA/133 Oct 11 06:15:03 machine kernel: ata2: EH complete Oct 11 06:15:05 machine kernel: sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB) Oct 11 06:15:05 machine kernel: sd 1:0:0:0: [sdb] Write Protect is off Oct 11 06:15:05 machine kernel: sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 11 06:15:05 machine kernel: sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB) Oct 11 06:15:05 machine kernel: sd 1:0:0:0: [sdb] Write Protect is off Oct 11 06:15:05 machine kernel: sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 11 11:33:33 machine pcscd: winscard.c:302:SCardConnect() Reader E-Gate 0 0 Not Found Oct 11 11:33:33 machine pcscd: winscard.c:302:SCardConnect() Reader E-Gate 0 0 Not Found Oct 11 11:33:33 machine pcscd: winscard.c:302:SCardConnect() Reader E-Gate 0 0 Not Found Oct 11 11:33:33 machine pcscd: winscard.c:302:SCardConnect() Reader E-Gate 0 0 Not Found Oct 11 14:11:29 machine pcscd: winscard.c:302:SCardConnect() Reader E-Gate 0 0 Not Found Oct 11 14:11:29 machine pcscd: winscard.c:302:SCardConnect() Reader E-Gate 0 0 Not Found Oct 11 14:11:29 machine pcscd: winscard.c:302:SCardConnect() Reader E-Gate 0 0 Not Found Oct 11 14:11:29 machine pcscd: winscard.c:302:SCardConnect() Reader E-Gate 0 0 Not Found Oct 11 15:29:39 machine pcscd: winscard.c:302:SCardConnect() Reader E-Gate 0 0 Not Found Oct 11 15:29:39 machine pcscd: winscard.c:302:SCardConnect() Reader E-Gate 0 0 Not Found Oct 11 15:29:39 machine pcscd: winscard.c:302:SCardConnect() Reader E-Gate 0 0 Not Found Oct 11 15:29:39 machine pcscd: winscard.c:302:SCardConnect() Reader E-Gate 0 0 Not Found Oct 12 00:05:59 machine pcscd: winscard.c:302:SCardConnect() Reader E-Gate 0 0 Not Found Oct 12 00:05:59 machine pcscd: winscard.c:302:SCardConnect() Reader E-Gate 0 0 Not Found Oct 12 00:05:59 machine pcscd: winscard.c:302:SCardConnect() Reader E-Gate 0 0 Not Found Oct 12 00:05:59 machine pcscd: winscard.c:302:SCardConnect() Reader E-Gate 0 0 Not Found Oct 12 00:06:03 machine pcscd: winscard.c:302:SCardConnect() Reader E-Gate 0 0 Not Found Oct 12 04:50:22 machine pcscd: winscard.c:302:SCardConnect() Reader E-Gate 0 0 Not Found Oct 12 04:50:22 machine pcscd: winscard.c:302:SCardConnect() Reader E-Gate 0 0 Not Found Oct 12 04:50:22 machine pcscd: winscard.c:302:SCardConnect() Reader E-Gate 0 0 Not Found
free -m -t total used free shared buffers cached Mem: 3964 3868 95 0 115 2720 -/+ buffers/cache: 1031 2932 Swap: 5951 0 5951 Total: 9916 3868 6047
procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------ r b swpd free buff cache si so bi bo in cs us sy id wa st 0 0 68 83716 121708 2840336 0 0 63 50 11 5 2 0 88 10 0 0 0 68 83576 121720 2840340 0 0 0 460 1024 1560 11 1 88 0 0 0 0 68 83576 121740 2840324 0 0 0 332 141 257 0 0 100 0 0 0 0 68 83452 121740 2840344 0 0 0 0 155 244 0 0 100 0 0 0 0 68 83452 121740 2840344 0 0 0 0 93 179 0 0 100 0 0 0 0 68 83452 121740 2840344 0 0 0 0 113 191 0 0 100 0 0 0 0 68 83436 121752 2840344 0 0 0 188 1670 2369 15 1 83 0 0 0 0 68 83576 121752 2840352 0 0 0 0 387 509 0 0 100 0 0 0 0 68 83700 121752 2840352 0 0 4 0 271 249 1 0 99 0 0 0 0 68 83452 121752 2840356 0 0 0 0 165 207 0 0 100 0 0 0 0 68 83452 121752 2840360 0 0 4 0 126 173 0 0 100 0 0 0 0 68 83452 121752 2840360 0 0 0 0 80 109 0 0 100 0 0 0 0 68 83444 121760 2840360 0 0 0 896 268 232 1 0 98 1 0 0 0 68 83452 121768 2840352 0 0 0 128 341 282 1 0 99 0 0 0 0 68 83452 121768 2840364 0 0 0 8 326 292 1 0 98 2 0 0 0 68 83248 121772 2840284 0 0 0 1472 1133 594 8 1 91 0 0 0 0 68 83204 121784 2840424 0 0 184 348 516 385 1 1 75 24 0 0 0 68 83204 121788 2840544 0 0 28 0 424 329 0 0 99 1 0 0 0 68 83204 121788 2840572 0 0 0 0 197 168 0 0 100 0 0 0 0 68 82316 121808 2840784 0 0 312 0 419 347 0 0 97 2 0 0 1 68 80824 121852 2841260 0 0 448 8 618 766 0 1 95 3 0 0 0 68 80948 121852 2841328 0 0 12 0 726 410 6 1 93 1 0 0 0 68 80956 121856 2841328 0 0 0 1020 116 150 0 0 100 0 0 0 0 68 80940 121856 2841328 0 0 0 0 796 696 5 0 94 0 0 0 0 68 80832 121856 2841336 0 0 0 0 239 213 0 0 100 0 0 0 0 68 80832 121856 2841336 0 0 0 0 146 176 0 0 100 0 0 0 0 68 80832 121856 2841336 0 0 0 0 132 131 0 0 100 0 0 0 0 68 80832 121856 2841336 0 0 0 0 144 140 0 0 100 0 0 0 0 68 80832 121860 2841332 0 0 0 668 111 145 0 0 100 0 0 0 0 68 80832 121860 2841340 0 0 4 0 194 216 0 0 100 0 0 0 2 68 80824 121860 2841340 0 0 0 1956 704 346 0 0 76 24 0 0 2 68 80824 121860 2841340 0 0 0 0 721 214 0 0 75 25 0 0 0 68 80824 121884 2841320 0 0 0 388 1145 1180 9 0 80 11 0 0 0 68 80816 121884 2841348 0 0 4 12 465 454 2 0 93 5 0 0 0 68 80832 121884 2841348 0 0 0 0 59 91 0 0 100 0 0 0 0 68 80832 121884 2841348 0 0 0 0 67 108 0 0 100 0 0 0 0 68 80832 121884 2841348 0 0 0 0 81 104 0 0 100 0 0
Под бози - разбирам, че всичко се "движи" страшно бавно - от логването, до рестартирането на даемоните, отварянето на файловете. Специално при mysqld, при опит за рестарт, няколко пъти дава failed (и изведнъж OK). По sshd нищо не е пипано, освен порт-а. По отношение на конфигурацията - не се занимавам аз с машината, не знам.
|
|
|
8
|
Linux секция за начинаещи / Настройка на хардуер / Re: Проблем с HDD maybe?
|
-: Oct 11, 2010, 20:39
|
top - 20:34:55 up 4 days, 3:33, 2 users, load average: 2.49, 2.01, 2.85 Tasks: 192 total, 1 running, 191 sleeping, 0 stopped, 0 zombie Cpu(s): 2.4%us, 0.2%sy, 0.0%ni, 62.6%id, 34.7%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 4059172k total, 3862300k used, 196872k free, 53948k buffers Swap: 6094840k total, 68k used, 6094772k free, 3373904k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 2447 apache 20 0 348m 16m 5100 S 2.0 0.4 0:01.02 httpd 3634 apache 20 0 348m 16m 5148 S 2.0 0.4 0:00.67 httpd 3643 apache 20 0 425m 16m 5208 S 2.0 0.4 0:00.57 httpd 1574 apache 20 0 348m 16m 5320 S 1.0 0.4 0:01.10 httpd 1849 apache 20 0 349m 16m 5068 S 1.0 0.4 0:01.15 httpd 25898 root 20 0 14880 1232 872 S 1.0 0.0 0:03.51 top 1 root 20 0 4084 864 620 S 0.0 0.0 0:00.70 init 2 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 kthreadd 3 root RT -5 0 0 0 S 0.0 0.0 0:11.38 migration/0 4 root 15 -5 0 0 0 S 0.0 0.0 0:15.01 ksoftirqd/0 5 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/0 6 root RT -5 0 0 0 S 0.0 0.0 0:11.20 migration/1 7 root 15 -5 0 0 0 S 0.0 0.0 0:08.63 ksoftirqd/1 8 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/1 9 root RT -5 0 0 0 S 0.0 0.0 0:07.93 migration/2 10 root 15 -5 0 0 0 S 0.0 0.0 0:09.54 ksoftirqd/2 11 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/2 12 root RT -5 0 0 0 S 0.0 0.0 0:09.23 migration/3 13 root 15 -5 0 0 0 S 0.0 0.0 0:01.77 ksoftirqd/3 14 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/3 15 root 15 -5 0 0 0 S 0.0 0.0 0:02.47 events/0 16 root 15 -5 0 0 0 S 0.0 0.0 1:19.53 events/1 17 root 15 -5 0 0 0 S 0.0 0.0 0:01.05 events/2 18 root 15 -5 0 0 0 S 0.0 0.0 0:16.37 events/3 19 root 15 -5 0 0 0 S 0.0 0.0 0:00.05 khelper 90 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 kintegrityd/0 91 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 kintegrityd/1 92 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 kintegrityd/2 93 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 kintegrityd/3 95 root 15 -5 0 0 0 S 0.0 0.0 0:00.19 kblockd/0 96 root 15 -5 0 0 0 S 0.0 0.0 0:00.26 kblockd/1 97 root 15 -5 0 0 0 S 0.0 0.0 0:04.96 kblockd/2 98 root 15 -5 0 0 0 S 0.0 0.0 0:14.76 kblockd/3 100 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 kacpid 101 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 kacpi_notify 190 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue 194 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 ata/0 195 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 ata/1 196 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 ata/2 197 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 ata/3 198 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 ata_aux 200 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 ksuspend_usbd 205 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 khubd 208 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 kseriod 277 root 20 0 0 0 0 S 0.0 0.0 0:01.42 pdflush 279 root 15 -5 0 0 0 S 0.0 0.0 0:19.65 kswapd0 326 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 aio/0 327 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 aio/1 328 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 aio/2 329 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 aio/3 518 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_0 521 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_1 543 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_2 546 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_3 628 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 kpsmoused 633 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 kstriped 636 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 ksnapd 719 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 kdmflush 720 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 kdmflush 721 root 15 -5 0 0 0 D 0.0 0.0 1:44.31 kjournald 766 root 16 -4 10612 840 308 S 0.0 0.0 0:00.27 udevd 815 apache 20 0 348m 16m 5044 S 0.0 0.4 0:01.20 httpd 1221 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 kauditd 1417 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_4 1419 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_5 1500 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_6 1501 root 15 -5 0 0 0 S 0.0 0.0 0:02.68 usb-storage 1503 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_7 1504 root 15 -5 0 0 0 S 0.0 0.0 0:02.70 usb-storage 1572 apache 20 0 347m 15m 5028 S 0.0 0.4 0:00.66 httpd 1575 apache 20 0 345m 15m 4180 S 0.0 0.4 0:01.11 httpd 1581 apache 20 0 347m 15m 5020 S 0.0 0.4 0:00.72 httpd 1583 apache 20 0 346m 15m 4236 S 0.0 0.4 0:00.60 httpd 1586 apache 20 0 357m 25m 5708 S 0.0 0.6 0:01.50 httpd 1595 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/0 1596 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/1 1597 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/2 1598 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/3 1599 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 kmpath_handlerd 1653 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 kjournald 1704 root 15 -5 0 0 0 S 0.0 0.0 0:02.99 kjournald 1846 apache 20 0 347m 16m 5052 S 0.0 0.4 0:01.06 httpd 1848 apache 20 0 425m 16m 5260 S 0.0 0.4 0:00.67 httpd 1934 root 15 -5 0 0 0 S 0.0 0.0 1:00.89 kondemand/0 1935 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 kondemand/1 1936 root 15 -5 0 0 0 S 0.0 0.0 0:47.41 kondemand/2 1937 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 kondemand/3 2125 root 20 0 114m 1520 896 S 0.0 0.0 0:00.50 rsyslogd 2137 root 20 0 6880 376 280 S 0.0 0.0 0:31.76 irqbalance 2148 rpc 20 0 18812 828 608 S 0.0 0.0 0:00.15 rpcbind 2163 rpcuser 20 0 10300 804 672 S 0.0 0.0 0:00.00 rpc.statd 2173 root 20 0 3924 352 268 S 0.0 0.0 0:00.00 courierlogger 2174 root 20 0 50564 1632 1296 S 0.0 0.0 0:00.00 authdaemond 2196 root 20 0 52780 1472 1032 S 0.0 0.0 0:00.00 authdaemond 2197 root 20 0 52780 1472 1032 S 0.0 0.0 0:00.00
|
|
|
10
|
Linux секция за начинаещи / Настройка на хардуер / Проблем с HDD maybe?
|
-: Oct 11, 2010, 15:41
|
Резултата от dmesg PCI-DMA: Using software bounce buffering for IO (SWIOTLB) ata1: SATA max UDMA/133 cmd 0x1c50 ctl 0x1c44 bmdma 0x1c10 irq 17 ata2: SATA max UDMA/133 cmd 0x1c48 ctl 0x1c40 bmdma 0x1c18 irq 17 ata1.00: ATA-8: WDC WD2500AAJS-00M0A0, 01.03E01, max UDMA/133 ata1.00: configured for UDMA/133 ata2.00: ATA-8: WDC WD2500AAJS-00M0A0, 01.03E01, max UDMA/133 ata2.00: configured for UDMA/133 ata3: SATA max UDMA/133 cmd 0x1c68 ctl 0x1c5c bmdma 0x1c30 irq 18 ata4: SATA max UDMA/133 cmd 0x1c60 ctl 0x1c58 bmdma 0x1c38 irq 18 ata5: PATA max UDMA/66 cmd 0x4420 ctl 0x4414 bmdma 0x4400 irq 23 ata2.00: BMDMA stat 0x24 ata2.00: cmd 25/00:18:81:97:a7/00:00:10:00:00/e0 tag 0 dma 12288 in ata2.00: configured for UDMA/133 ata2.00: BMDMA stat 0x24 ata2.00: cmd 25/00:18:81:97:a7/00:00:10:00:00/e0 tag 0 dma 12288 in ata2.00: configured for UDMA/133 ata2.00: BMDMA stat 0x24 ata2.00: cmd 25/00:18:81:97:a7/00:00:10:00:00/e0 tag 0 dma 12288 in ata2.00: configured for UDMA/133 Тъй като не съм много на ти, бихте ли ми обяснили какво точно "значи" това 
|
|
|
14
|
Linux секция за начинаещи / Настройка на програми / Проблем с PHP (slackware 13.0)
|
-: Aug 22, 2010, 08:36
|
Здравейте,
Опитвам да се подкарам едно webserver-че на слака, обаче нещо не се отдава.
Инсталирах апаче-то, mysql-a и пхп-то (настроих ги уж), но като създадох файла info.php, като го отворя на 77.70.108.208/info.php тръгва да ми го тегли?? (на локалхост не мога, тъй като няма графична среда, машинката е доста слаба) Файла съдържа <?php phpinfo(); ?>, пробвах и с <phpinfo; ?> - пак същото.
|
|
|
15
|
Linux секция за начинаещи / Настройка на програми / Джейлване на юзър
|
-: Aug 24, 2009, 14:15
|
Четох разни статии из нета, но така и не намерих статия, в която се описва как точно да се jailne определен юзър и да има само И ЕДИСТВЕНО достъп до определена директория (без да има read права за останалите директории).
|
|
|
|