Изпечатай

[mystical]

Става реч за Philips SPC210NC webcam, която я купих скоро. Имах перфектна веб камерка DELUX B01, но нямаше драйвъри за Линукс и си казах "щом не върви под Линукс, е втока класа стока ... "
Както и да е ...

[root@localhost root]# modprobe spca5xx

[root@localhost root]# lsusb
Bus 003 Device 002: ID 0471:032d Philips

[root@localhost root]# dmesg  
squashfs: version 3.0 (2006/03/15) Phillip Lougher
usbcore: registered new driver usbfs
input: ImPS/2 Generic Wheel Mouse as /class/input/input1
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.3
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, high) -> IRQ 16
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:02.0: irq 16, io mem 0xea080000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:02.1 -> Link [APCG] -> GSI 21 (level, high) -> IRQ 17
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: OHCI Host Controller
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.1: irq 17, io mem 0xea083000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 20 (level, high) -> IRQ 18
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: EHCI Host Controller
ehci_hcd 0000:00:02.2: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:02.2: irq 18, io mem 0xea086000
ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
Initializing USB Mass Storage driver...
ohci_hcd 0000:00:02.1: wakeup
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb 2-1: new full speed USB device using ohci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice

usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver

usbcore: registered new driver spca5xx
3rdparty/usb-spca50x/drivers/usb/spca5xx.c: spca5xx driver 00.60.00 registered

[root@localhost root]# xawtv
This is xawtv-3.94, running on Linux/i686 (2.6.15-1-586tsc)
can't open /dev/video0: No such file or directory
v4l-conf had some trouble, trying to continue anyway
v4l2: open /dev/video0: No such file or directory
v4l2: open /dev/video0: No such file or directory
v4l: open /dev/video0: No such file or directory
no video grabber device available

Пробвах и нещо друго:
KDE Control Center >Information> USB Devices
OHCI Host Controller (2)
SPC 210NC
Manufacturer: Philips

Разпознава камерата.
В момента не съм с определен Линукс, ако се интересувате от това.

[dedmin]

Аз съм 300 и не стана с този драйвер, а с по-новия - провери на сайта.
http://mxhaard.free.fr/

[mystical]

С тези драйвъри се получи, но ми дава обърнат образ. Главата ми виси надолу  '> Ако се обърни камерата сатава, но малко се разваля естетиката. Опциите в драйвърите са ограничени. Ако някой знае как можеда се оправи, ще съм му благодарен.

[neter]

Ми... сложи си една леща пред камерата и намери точното разстояние, на което лещата обръща образа с първоначалните му пропорции  '>

[dedmin]

Не може да се оправи. Такъв е драйвера.