Изпечатай

[MinuTeMan]

Благодаря на всички, които се отзоваха...
Оправих нещата и вече наистина може да се каже, че съм зарибен по Федора (;

[valbo]

Това може би ще свърши работа. Аз съм на FC5 и работи. Други интерестни неща на този адрес:
mjm wired

Цитат

Mount NTFS Partitions 12 June 2005 Either recompile your kernel for NTFS read support. (Hard) Or obtain the matching the proper kernel module. Again make sure you have the correct version (example similar to: 2.6.11-1.1369_FC4). Use the 'uname -rm' command for more information. Go to http://www.linux-ntfs.org/content/view/129/65/ for the module/rpm. Go to http://www.linux-ntfs.org/content/view/127/63/ for the instructions. [root@charon fc4]# uname -rm 2.6.11-1.1369_FC4 i686 I selected '2.6.11-1.1369_FC4' 'i686' for my Athlon-XP computer. Both parts MUST match. [root@charon fc4]# rpm -ivh kernel-module-ntfs-2.6.11-1.1369_FC4-2.1.22-0.rr.6.0.i686.rpm Preparing...                ########################################### [100%]    1:kernel-module-ntfs-2.6.########################################### [100%] To allow access to NTFS partitions you must (1) check how many partitions you have, (2) create mount points, (3) mount partitions, and (4) update fstab to mount at next boot. Check Partitions Check how many NTFS partitions you have: [root@charon fc4]# fdisk -lu /dev/hda | grep NTFS /dev/hda1   *          63    16771859     8385898+   7  HPFS/NTFS /dev/hda2        16771860    33543719     8385930    7  HPFS/NTFS /dev/hda3        33752628    67312349    16779861    7  HPFS/NTFS Usually the first will be C drive, next D, etc. Create Mount Points Instead of /media/, you can also use /mnt/, both will work, but make sure to make the correct edits in all places. [root@charon fc4]# cd /media/ [root@charon media]# mkdir c_drive [root@charon media]# mkdir d_drive [root@charon media]# mkdir e_drive You don't have to use these names, if you prefer to creat folders such as movies, documents, or winxp, any name will work (without spaces). Mount Partitions Run 'man mount' to fully explain what "-r -o umask=0222" does. [root@charon media]# mount /dev/hda1 /media/c_drive/ -t ntfs -r -o umask=0222 [root@charon media]# mount /dev/hda2 /media/d_drive/ -t ntfs -r -o umask=0222 [root@charon media]# mount /dev/hda3 /media/e_drive/ -t ntfs -r -o umask=0222 Update /etc/fstab Open '/etc/fstab' in an editor and add these lines to the END of the file: /dev/hda1   /media/c_drive     ntfs    ro,defaults,umask=0222 0 0 /dev/hda2   /media/d_drive     ntfs    ro,defaults,umask=0222 0 0 /dev/hda3   /media/e_drive     ntfs    ro,defaults,umask=0222 0 0 NOTE for FAT32 users Insted of 'NTFS' above you can use 'VFAT' to mount your FAT32 partitions. No extra modules or download are needed. Just  replace 'vfat' for 'ntfs' when mounting and when editting '/etc/fstab'. FAT32 read and write is supported. If you wish to mount read/write, then use: '-rw' when Mounting Partitions, and 'rw,defaults,umask=0000 0 0' when editing '/etc/fstab'.