Тема: Kak da si sloja drivera na Video-to GForce2MX? (Прочетена 5615 пъти)

Al_Kapone · « -: Mar 26, 2004, 13:21 »

Absoliutno na4inaesht sym. Linux-a mi e SuSe 8.2. Izteglih ot stranicata na NVidia tozi driver-"NVIDIA-Linux-x86-1.0-5336-pkg1.run"
Obache za SuSe imashe dopylnitelno readme da pro4eta:

--------
This document describes how to use the new nvidia installer for the
installation of the latest nvidia driver, which is available for your
SuSE Linux system.

"NOTE: The nvidia installer does not work as long as a Xserver is still
   running and the nvidia kernel module is still loaded. Therefore
   please boot into runlevel 3 by specifying "3" as kernel boot
   option or switch to runlevel 3 ("init 3") and unload the kernel
   module ("rmmod nvidia") before running the nvidia installer.

SuSE Linux 8.2
   SuSE Linux Desktop (SLD)
----------------------------

1) Kernel sources must be installed and configured. Usually this means
installing the 'kernel-source' package with YaST2, update it - if not
already done - via YaST2 Online Update (YOU) and configure it then
with the following commands:

cd /usr/src/linux
make cloneconfig && make dep

2) Use the nvidia installer for 1.0-5336.

sh NVIDIA-Linux-x86-1.0-5336-pkg1.run

3) Configure XFree86 with

sax2 -m 0=nvidia (0 is a digit, not a letter!

'>

NOTE: There is no need to try to enable 3D support. It's already
   enabled, when the nvidia driver is running. Ignore the
   misleading error message, that 3D support can't be enabled.
   This problem will be fixed with SuSE > 9.0 and is related to the
   latest nvidia driver release."

Ne znam mai neshto ne e "standartna" instalaciata na tozi driver, niqkoi moje li da mi pomogne?

AcidSouL · « **Отговор #1 -:** Mar 26, 2004, 20:19 »

trqqq da ne si pod x...ina4e nqq da stane...i trqq si root....
pi6e6 --> sh NVIDIA-Linux-x86-1.0-5336-pkg1.run
installva6 tam....i posle reboot....
posle trqq si prepravi6 XF86config
/etc/x11/......
tam deto pi6e Driver "n" ili "vesa" go pravi6 na "nvidia"
mai tei be6e : ':p'

Al_Kapone · « **Отговор #2 -:** Mar 26, 2004, 22:23 »

huh, tova i az go shvanah, samo 4e ne znam kak da startiram SuSe-to bez grafichnata sreda... i syotvetno kato instalna driver-a da moga pak da ia pusna de

'>

zazzko · « **Отговор #3 -:** Mar 27, 2004, 00:45 »

telinit 3 или telinit 1. Това като root. След това telinit 4.

Al_Kapone · « **Отговор #4 -:** Mar 27, 2004, 11:49 »

Tova pyk kakvo e?

sebastianz55 · « **Отговор #5 -:** Mar 27, 2004, 11:51 »

в конзолата го пишеш...

Al_Kapone · « **Отговор #6 -:** Mar 27, 2004, 11:52 »

Taka ili ina4e az uspiah da go sloja driver-a, no vse pak kakakvo pravi tova?

Подобни теми
	Заглавие	Започната от	Отговора	Прегледи	Последна публикация
	kakva OS da sloja na 100Mhz i 100MB HDD Настройка на програми	faq	2	7166	Jun 15, 2002, 17:32 от rockandvaso
	kak da sloja driver? Настройка на хардуер	LameRootUser	1	7375	Nov 08, 2002, 15:43 от rockandvaso
	Slackware 9.1 ili Mandrake 10.0 da si sloja ?! Настройка на програми	FlyEmirates	15	8936	May 25, 2004, 23:25 от
	Problem s drivera za rtl8111b Кошче	vasilvalchev	0	3581	Jan 11, 2007, 08:31 от vasilvalchev
	Nemoga da si sloja nvidia driver Кошче	vintovert	3	6290	Jan 20, 2008, 15:57 от zeridon

Автор Тема: Kak da si sloja drivera na Video-to GForce2MX? (Прочетена 5615 пъти)