така... прощавайте за невежливоста ми, забравих да дам повечко инфо ... значи лаптопа ми е
този драйвера който ползвам за wlan е уиндоуския зареден през ndiswrapper.
senser нямам този файл /etc/inti.d/net.wlan0
gizi_ не се казват по този начин файловете в /etc/init.d/
там имам файл на име networking предполагам единия е този... но друг не намирам.
Що се отнася до /usr/lib/hal/scripts/linux/hal-system-power-suspend-linux отварям го и там пише :
#!/bin/sh
alarm_not_supported() {
echo org.freedesktop.Hal.Device.SystemPowerManagement.AlarmNotSupported >&2
echo Waking the system up is not supported >&2
exit 1
}
unsupported() {
echo org.freedesktop.Hal.Device.SystemPowerManagement.NotSupported >&2
echo No suspend method found >&2
exit 1
}
read seconds_to_sleep
# on some video drivers we must ignore video quirks, since they break
# on them; this particularly affects Intel >= 915G and the proprietary
# nvidia and fglrx drivers.
if [ -d /sys/module/i915 ]; then
# the i915 kmod also drives the i830 and i855 chips nowadays, but they
# still need quirks on at least Linux 2.6.24.
PRODID=`hal-get-property --udi $HAL_PROP_INFO_UDI --key system.hardware.primary_video.product`
if [ "$PRODID" != 13696 ] && [ "$PRODID" != 13698 ] && \
[ "$PRODID" != 13687 ]; then
NEW_INTEL=1
fi
fi
if [ "$NEW_INTEL" ] || [ -d /sys/module/nvidia ] || [ -d /sys/module/fglrx ];
then
HAL_PROP_POWER_MANAGEMENT_QUIRK_DPMS_ON=false
HAL_PROP_POWER_MANAGEMENT_QUIRK_VBESTATE_RESTORE=false
HAL_PROP_POWER_MANAGEMENT_QUIRK_VBEMODE_RESTORE=false
HAL_PROP_POWER_MANAGEMENT_QUIRK_VGA_MODE_3=false
HAL_PROP_POWER_MANAGEMENT_QUIRK_VBE_POST=false
HAL_PROP_POWER_MANAGEMENT_QUIRK_RESET_BRIGHTNESS=false
# if we do not have any explicit quirks in the hal FDIs, enable a few by
# default which work around kernel problems and are necessary with most older
# video drivers
elif ! env | grep -q HAL_PROP_POWER_MANAGEMENT_QUIRK; then
HAL_PROP_POWER_MANAGEMENT_QUIRK_DPMS_ON=true
HAL_PROP_POWER_MANAGEMENT_QUIRK_VBESTATE_RESTORE=true
HAL_PROP_POWER_MANAGEMENT_QUIRK_VBEMODE_RESTORE=true
HAL_PROP_POWER_MANAGEMENT_QUIRK_VGA_MODE_3=true
HAL_PROP_POWER_MANAGEMENT_QUIRK_VBE_POST=true
HAL_PROP_POWER_MANAGEMENT_QUIRK_RESET_BRIGHTNESS=true
fi
# Make a suitable command line argument so that the tools can do the correct
# quirks for video resume.
# Passing the quirks to the tool allows the tool to not depend on HAL for data.
QUIRKS=""
[ "$HAL_PROP_POWER_MANAGEMENT_QUIRK_S3_BIOS" = "true" ] && QUIRKS="$QUIRKS --quirk-s3-bios"
[ "$HAL_PROP_POWER_MANAGEMENT_QUIRK_S3_MODE" = "true" ] && QUIRKS="$QUIRKS --quirk-s3-mode"
[ "$HAL_PROP_POWER_MANAGEMENT_QUIRK_DPMS_SUSPEND" = "true" ] && QUIRKS="$QUIRKS --quirk-dpms-suspend"
[ "$HAL_PROP_POWER_MANAGEMENT_QUIRK_DPMS_ON" = "true" ] && QUIRKS="$QUIRKS --quirk-dpms-on"
[ "$HAL_PROP_POWER_MANAGEMENT_QUIRK_VBESTATE_RESTORE" = "true" ] && QUIRKS="$QUIRKS --quirk-vbestate-restore"
[ "$HAL_PROP_POWER_MANAGEMENT_QUIRK_VBEMODE_RESTORE" = "true" ] && QUIRKS="$QUIRKS --quirk-vbemode-restore"
[ "$HAL_PROP_POWER_MANAGEMENT_QUIRK_VGA_MODE_3" = "true" ] && QUIRKS="$QUIRKS --quirk-vga-mode3"
[ "$HAL_PROP_POWER_MANAGEMENT_QUIRK_VBE_POST" = "true" ] && QUIRKS="$QUIRKS --quirk-vbe-post"
[ "$HAL_PROP_POWER_MANAGEMENT_QUIRK_RADEON_OFF" = "true" ] && QUIRKS="$QUIRKS --quirk-radeon-off"
[ "$HAL_PROP_POWER_MANAGEMENT_QUIRK_RESET_BRIGHTNESS" = "true" ] && QUIRKS="$QUIRKS --quirk-reset-brightness"
[ "$HAL_PROP_POWER_MANAGEMENT_QUIRK_NONE" = "true" ] && QUIRKS="$QUIRKS --quirk-none"
# Urh. Do any BIOSen handle this correctly?
if [ $seconds_to_sleep != "0" ] ; then
alarm_not_supported
fi
# We only support pm-utils
if [ -x "/usr/sbin/pm-suspend" ] ; then
/usr/sbin/pm-suspend $QUIRKS
RET=$?
else
# TODO: add support
unsupported
fi
# Refresh devices as a resume can do funny things
for type in button battery ac_adapter
do
devices=`hal-find-by-capability --capability $type`
for device in $devices
do
dbus-send --system --print-reply --dest=org.freedesktop.Hal \
$device org.freedesktop.Hal.Device.Rescan
done
done
exit $RET
сигурен ли си, че трябва да променя всичко това на :
if [ -x "/usr/sbin/pm-suspend" ] ; then
/usr/sbin/pm-suspend $QUIRKS
RET=$?
else
# TODO: add support
unsupported
fi
и буквално ли трябва да напиша този код или.... ?Май доста съм назад ама искам да се науча
Също един проблем... микрофона не работи... не приема, ползвам : HDA Intel alsa mixer
Автор
Тема: Проблем със Звука под Ubuntu (Прочетена 6941 пъти)
May 29, 2009, 22:35