Изпечатай

[dani_sh]

Здравейте на всички,

Преди няколко дена ми се наложи да преинсталирам линукса. Тъй като имах ubuntu 8.04 на флашка инсталирах него. Но от разсеяност или от сънливост, след инсталация се оказа че мога да boot вам linuxa и windowsа само през флашката. Отворих menu.lst и промених linuxa да се bootва не от hd1,6 a от hd0,6. Това помогна. Но за Windowsa както и да променях menu.lst не можах да го оправя.


Благодаря предварително за помоща.     

[tolostoi]

Дай го тоя menu.lst да го видим.

[dani_sh]

# menu.lst - See: grub(, info grub, update-grub(
#            grub-install(, grub-floppy(,
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default      0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout      10

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title      Windows 95/98/NT/2000
# root      (hd0,0)
# makeactive
# chainloader   +1
#
# title      Linux
# root      (hd0,1)
# kernel   /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=29b30cae-b1bc-4e94-aa95-f634a4cc421d ro

## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd1,6)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title      Ubuntu 8.04.3 LTS, kernel 2.6.24-24-generic
root      (hd0,6)
kernel      /boot/vmlinuz-2.6.24-24-generic root=UUID=29b30cae-b1bc-4e94-aa95-f634a4cc421d ro quiet splash
initrd      /boot/initrd.img-2.6.24-24-generic
quiet

title      Ubuntu 8.04.3 LTS, kernel 2.6.24-24-generic (recovery mode)
root      (hd0,6)
kernel      /boot/vmlinuz-2.6.24-24-generic root=UUID=29b30cae-b1bc-4e94-aa95-f634a4cc421d ro single
initrd      /boot/initrd.img-2.6.24-24-generic

title      Ubuntu 8.04.3 LTS, memtest86+
root      (hd0,6)
kernel      /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title      Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sdb1
title      Windows Vista/Longhorn (loader)1
root      (hd0,0)
savedefault
makeactive
map      (hd0) (hd1)
map      (hd1) (hd0)
chainloader   +1

[tolostoi]

Какво ти дава като избереш windows-a от менюто? Грешка някаква или просто зависва, или те връща пак на груб-а или нещо друго? Пробвай да добавиш това най доло в menu.lst ще ти се появи нов ред за стартиране да видим какво ще стане с него. На кой дял ди е виндовса?

Код:

# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title	 Windows Vista (loader)NEW
rootnoverify	(hd0,0)
savedefault
makeactive
chainloader	+1

[dani_sh]

Благодаря, това помогна. Иначе когато се опитвах да го буутна от  ми изписваше Starting... и после вместо да продължи чувах усилено щракане от харддиска и забиваше. Благодаря отново сигурно щеше да ми отнеме поне седмица да разбере за rootnoverify.