Здравейте, от няколко дена се опитвам да си подкарам дриверите на видео картата , но нещо нестава четох из гоогле но пак нищо не открих .. Въпроса ми как да си подкарам fglrx да робати, дривери и всичко останало съм инсталирал имам ги модулите задал съм го във хорг-а , и вече целиа съм изчерпан защо не иска да работи fglrx.
Ето и малко инфо
xugpa@debian:/root$ fglrxinfo
Error: unable to open display (null)
ето и модулите
xugpa@debian:/root$ lsmod
Module Size Used by
binfmt_misc 7560 1
ppdev 6468 0
lp 8164 0
powernow_k8 12036 1
cpufreq_conservative 5960 0
cpufreq_userspace 3172 0
cpufreq_ondemand 6476 1
cpufreq_stats 3776 0
freq_table 4224 3 powernow_k8,cpufreq_ondemand,cpufreq_stats
cpufreq_powersave 1856 0
ipv6 235396 31
fglrx 2018620 0
loop 12748 0
snd_seq_dummy 2660 0
snd_seq_oss 24992 0
snd_seq_midi 5728 0
parport_pc 22500 1
parport 30988 3 ppdev,lp,parport_pc
psmouse 32336 0
snd_hda_intel 325720 0
snd_rawmidi 18496 1 snd_seq_midi
k8temp 4064 0
serio_raw 4740 0
pcspkr 2432 0
snd_seq_midi_event 6432 2 snd_seq_oss,snd_seq_midi
snd_pcm_oss 32800 0
snd_mixer_oss 12320 1 snd_pcm_oss
snd_seq 41456 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_pcm 62660 2 snd_hda_intel,snd_pcm_oss
i2c_piix4 7216 0
snd_seq_device 6380 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd_timer 17800 2 snd_seq,snd_pcm
i2c_core 19828 1 i2c_piix4
snd 45636 9 snd_seq_oss,snd_hda_intel,snd_rawmidi,snd_pcm_oss,snd_mixer_oss,snd_seq,snd_pcm,snd_seq_device,snd_timer
soundcore 6368 1 snd
snd_page_alloc 7816 2 snd_hda_intel,snd_pcm
ati_agp 6220 0
button 6096 0
agpgart 28808 2 fglrx,ati_agp
evdev 8000 3
ext3 105576 2
jbd 39476 1 ext3
mbcache 7108 1 ext3
ide_cd_mod 27684 0
cdrom 30176 1 ide_cd_mod
sd_mod 22200 4
atiixp 3396 0 [permanent]
ide_pci_generic 3908 0 [permanent]
ide_core 96168 3 ide_cd_mod,atiixp,ide_pci_generic
floppy 47844 0
ehci_hcd 28428 0
ata_generic 4676 0
ahci 23596 3
ohci_hcd 18500 0
libata 140448 2 ata_generic,ahci
scsi_mod 129548 2 sd_mod,libata
dock 8304 1 libata
usbcore 118192 3 ehci_hcd,ohci_hcd
r8169 27716 0
thermal 15228 0
processor 32576 2 powernow_k8,thermal
fan 4196 0
thermal_sys 10856 3 thermal,processor,fan
xugpa@debian:/root$ cat /etc/X11/xorg.conf
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "dri"
Load "glx"
Load "int10"
Load "vbe"
Load "GLcore"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "Monitor"
Identifier "Dell 1707 FPVT"
EndSection
Section "Monitor"
Identifier "Dell 1707 FPVT"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Configured Video Device"
EndSection
Section "Device"
Identifier "Radeon HD 3600"
Driver "fglrx"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
btw:Debian/Lenny 5.0.4 ос
01:00.0 VGA compatible controller: ATI Technologies Inc Mobility Radeon HD 3600 Series
изтеглих си дриверите от ати сайта ...
Надявам се някой да помогне малко... Мерси Предварително