Автор Тема: Проблеми с eth2, BIND на Ubuntu 8.10 Desktop  (Прочетена 5115 пъти)

mitkomihov

  • Напреднали
  • *****
  • Публикации: 15
  • Distribution: Ubuntu 8.10 server
    • Профил
    • WWW
Здравейте,

Инсталирам, за пръв път в живота си, сървър под Ubuntu 8.10 Desktop. Идеята ми е да го ползвам за учебен за Уеб дизайн. Ето какво съм направил досега:
Имам на РС-то две мрежови карти.
eth0 с DHCP-клиент за нета
eth2 с DHCP-сървър за вътрешната мрежа

оттука нататък работя на Уиндоуската машина с SSH, защото монитора ми е един.

Samba с минимална конфигурация - една споделена директория
MySQL - конфигуриран
Apache - само инсталиран. Още не съм стигнал до конфигуриране, но работи.

реших да създам фиктивен домейн, за вътрешната мрежа и инсталирах BIND9.

Конфигурирах го и тръгна да си работи нормално.

Когато реших да гася компа (сървъра) увисна. С Ctrl-Alt-F1 видях, че не може да "disable networking". След което не отговаря на никакви команди, единствено от копчето се гаси. При стартиране стига донякъде и увисва. С Ctrl-Alt-Del убива два процеса:

Init :rcS main process (2251)
Init :rc6 main process (4150)

и продължава зареждането нормално до края.

Не работи вътрешната мрежа.

с ifconfig  не се вижда eth2 като конфигурирана, показва се с ifconfig -a, но без subnet.

това е част от syslog:

Feb 10 23:47:00 X31 dhcpd: No subnet declaration for eth2 (0.0.0.0).
Feb 10 23:47:00 X31 dhcpd: ** Ignoring requests on eth2.  If this is not what
Feb 10 23:47:00 X31 dhcpd:    you want, please write a subnet declaration
Feb 10 23:47:00 X31 dhcpd:    in your dhcpd.conf file for the network segment
Feb 10 23:47:00 X31 dhcpd:    to which interface eth1 is attached. **
Feb 10 23:47:00 X31 dhcpd:
Feb 10 23:47:00 X31 dhcpd:
Feb 10 23:47:00 X31 dhcpd: Not configured to listen on any interfaces!

(това е цитат от друга тема, но при мен е същото)

sudo apt-get remove bind9 - без ефект

sudo apt-get remove resolvconf - нещата се оправят

sudo apt-get install bind - ситуацията пак се осмърдява.

Някой има ли идеи откъде идва проблема?
« Последна редакция: Mar 15, 2010, 14:10 от VladSun »
Активен

Acho

  • Напреднали
  • *****
  • Публикации: 5776
  • Distribution: Slackware, MikroTik - сървърно
  • Window Manager: console only
    • Профил
    • WWW
Re: Проблеми с eth2, BIND на Ubuntu 8.10 Desctop
« Отговор #1 -: Mar 15, 2010, 13:09 »
Митко, ами я дай dhcpd.conf да го видим.  И къде е eth1 ? Няма ли ?
Активен

CPU - Intel Quad-Core Q8400, 2.66 GHz; Fan - Intel Box; MB - Intel G41M-T2; RAM - DDR2-800, Kingston HyperX, 2X2048 MB; VC - onboard, Intel G41 Express Chipset; HDD - Toshiba, 500 GB, SATAII; SB - Realtek HD Audio; DVD-RW - TSSTcorp DVD-RW; LAN - Realtek PCI-E GBE Controller; PSU - Fortron 400 Watt.

mitkomihov

  • Напреднали
  • *****
  • Публикации: 15
  • Distribution: Ubuntu 8.10 server
    • Профил
    • WWW
Re: Проблеми с eth2, BIND на Ubuntu 8.10 Desctop
« Отговор #2 -: Mar 15, 2010, 13:21 »
eth1 беше на външна карта с USB, но подозирах, че това създава проблеми и сложих една обикновена, Явно системата си я кръсти eth2.

ето файла dhcpd.conf

# Sample /etc/dhcpd.conf
# (add your comments here)
default-lease-time 6000;
max-lease-time 7200;
option subnet-mask 255.255.255.0;
option broadcast-address 192.168.10.255;
option routers 192.168.10.1;
option domain-name-servers 192.168.10.1;
option domain-name "mitko.mm";
option netbios-name-servers 192.168.10.1;
option netbios-node-type 2;
 

subnet 192.168.10.0 netmask 255.255.255.0 {
range 192.168.10.10 192.168.10.100;
}


#
# Sample configuration file for ISC dhcpd for Debian
#
# Attention: If /etc/ltsp/dhcpd.conf exists, that will be used as
# configuration file instead of this file.
#
# $Id: dhcpd.conf,v 1.1.1.1 2002/05/21 00:07:44 peloy Exp $
#

# The ddns-updates-style parameter controls whether or not the server will
# attempt to do a DNS update when a lease is confirmed. We default to the
# behavior of the version 2 packages ('none', since DHCP v2 didn't
# have support for DDNS.)
ddns-update-style none;

# option definitions common to all supported networks...
#option domain-name "example.org";
#option domain-name-servers ns1.example.org, ns2.example.org;

#default-lease-time 600;
#max-lease-time 7200;

# If this DHCP server is the official DHCP server for the local
# network, the authoritative directive should be uncommented.
authoritative;

# Use this to send dhcp log messages to a different log file (you also
# have to hack syslog.conf to complete the redirection).
#log-facility local7;

# No service will be given on this subnet, but declaring it helps the
# DHCP server to understand the network topology.

#subnet 10.152.187.0 netmask 255.255.255.0 {
#}

# This is a very basic subnet declaration.

#subnet 10.254.239.0 netmask 255.255.255.224 {
#  range 10.254.239.10 10.254.239.20;
#  option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org;
#}

# This declaration allows BOOTP clients to get dynamic addresses,
# which we don't really recommend.

#subnet 10.254.239.32 netmask 255.255.255.224 {
#  range dynamic-bootp 10.254.239.40 10.254.239.60;
#  option broadcast-address 10.254.239.31;
#  option routers rtr-239-32-1.example.org;
#}

# A slightly different configuration for an internal subnet.
#subnet 10.5.5.0 netmask 255.255.255.224 {
#  range 10.5.5.26 10.5.5.30;
#  option domain-name-servers ns1.internal.example.org;
#  option domain-name "internal.example.org";
#  option routers 10.5.5.1;
#  option broadcast-address 10.5.5.31;
#  default-lease-time 600;
#  max-lease-time 7200;
#}

# Hosts which require special configuration options can be listed in
# host statements.   If no address is specified, the address will be
# allocated dynamically (if possible), but the host-specific information
# will still come from the host declaration.

#host passacaglia {
#  hardware ethernet 0:0:c0:5d:bd:95;
#  filename "vmunix.passacaglia";
#  server-name "toccata.fugue.com";
#}

# Fixed IP addresses can also be specified for hosts.   These addresses
# should not also be listed as being available for dynamic assignment.
# Hosts for which fixed IP addresses have been specified can boot using
# BOOTP or DHCP.   Hosts for which no fixed address is specified can only
# be booted with DHCP, unless there is an address range on the subnet
# to which a BOOTP client is connected which has the dynamic-bootp flag
# set.
#host fantasia {
#  hardware ethernet 08:00:07:26:c0:a5;
#  fixed-address fantasia.fugue.com;
#}

# You can declare a class of clients and then do address allocation
# based on that.   The example below shows a case where all clients
# in a certain class get addresses on the 10.17.224/24 subnet, and all
# other clients get addresses on the 10.0.29/24 subnet.

#class "foo" {
#  match if substring (option vendor-class-identifier, 0, 4) = "SUNW";
#}

#shared-network 224-29 {
#  subnet 10.17.224.0 netmask 255.255.255.0 {
#    option routers rtr-224.example.org;
#  }
#  subnet 10.0.29.0 netmask 255.255.255.0 {
#    option routers rtr-29.example.org;
#  }
#  pool {
#    allow members of "foo";
#    range 10.17.224.10 10.17.224.250;
#  }
#  pool {
#    deny members of "foo";
#    range 10.0.29.10 10.0.29.230;
#  }
#}
Активен

Acho

  • Напреднали
  • *****
  • Публикации: 5776
  • Distribution: Slackware, MikroTik - сървърно
  • Window Manager: console only
    • Профил
    • WWW
Re: Проблеми с eth2, BIND на Ubuntu 8.10 Desctop
« Отговор #3 -: Mar 15, 2010, 13:31 »
Мите, пратих ти Л.С. прочети го и тествай.
Активен

CPU - Intel Quad-Core Q8400, 2.66 GHz; Fan - Intel Box; MB - Intel G41M-T2; RAM - DDR2-800, Kingston HyperX, 2X2048 MB; VC - onboard, Intel G41 Express Chipset; HDD - Toshiba, 500 GB, SATAII; SB - Realtek HD Audio; DVD-RW - TSSTcorp DVD-RW; LAN - Realtek PCI-E GBE Controller; PSU - Fortron 400 Watt.

mitkomihov

  • Напреднали
  • *****
  • Публикации: 15
  • Distribution: Ubuntu 8.10 server
    • Профил
    • WWW
Re: Проблеми с eth2, BIND на Ubuntu 8.10 Desktop
« Отговор #4 -: Mar 15, 2010, 16:49 »
ОК, докарахме я дотук:

/var/log/syslog - от момента на sudo reboot

Mar 15 16:26:48 mserver init: tty4 main process (4352) killed by TERM signal
Mar 15 16:26:48 mserver init: tty5 main process (4353) killed by TERM signal
Mar 15 16:26:48 mserver init: tty2 main process (4362) killed by TERM signal
Mar 15 16:26:48 mserver init: tty3 main process (4364) killed by TERM signal
Mar 15 16:26:48 mserver init: tty6 main process (4366) killed by TERM signal
Mar 15 16:26:48 mserver init: tty1 main process (5603) killed by TERM signal
Mar 15 16:26:48 mserver acpid: client 5315[0:0] has disconnected
Mar 15 16:26:48 mserver acpid: client connected from 5315[0:0]
Mar 15 16:26:53 mserver kernel: [ 7745.709316] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
Mar 15 16:26:53 mserver kernel: [ 7745.709329] apm: disabled on user request.
Mar 15 16:26:53 mserver mysqld[4887]: 100315 16:26:53 [Note] /usr/sbin/mysqld: Normal shutdown
Mar 15 16:26:53 mserver mysqld[4887]:
Mar 15 16:26:55 mserver mysqld[4887]: 100315 16:26:55  InnoDB: Starting shutdown...
Mar 15 16:26:56 mserver mysqld[4887]: 100315 16:26:56  InnoDB: Shutdown completed; log sequence number 0 43655
Mar 15 16:26:56 mserver mysqld[4887]: 100315 16:26:56 [Note] /usr/sbin/mysqld: Shutdown complete
Mar 15 16:26:56 mserver mysqld[4887]:
Mar 15 16:26:56 mserver mysqld_safe[6261]: ended
Mar 15 16:26:58 mserver NetworkManager: <WARN>  nm_signal_handler(): Caught signal 15, shutting down normally.
Mar 15 16:27:00 mserver bluetoothd[5238]: bridge pan0 removed
Mar 15 16:27:00 mserver bluetoothd[5238]: Stopping SDP server
Mar 15 16:27:00 mserver bluetoothd[5238]: Exit
Mar 15 16:27:01 mserver named[5834]: received control channel command 'stop'
Mar 15 16:27:01 mserver named[5834]: shutting down: flushing changes
Mar 15 16:27:01 mserver named[5834]: stopping command channel on 127.0.0.1#953
Mar 15 16:27:01 mserver named[5834]: stopping command channel on ::1#953
Mar 15 16:27:01 mserver named[5834]: no longer listening on ::#53
Mar 15 16:27:01 mserver named[5834]: no longer listening on 127.0.0.1#53
Mar 15 16:27:01 mserver named[5834]: no longer listening on 192.168.1.107#53
Mar 15 16:27:01 mserver named[5834]: no longer listening on 192.168.10.1#53
Mar 15 16:27:01 mserver named[5834]: exiting
Mar 15 16:27:01 mserver avahi-daemon[4756]: Got SIGTERM, quitting.
Mar 15 16:27:01 mserver avahi-daemon[4756]: Leaving mDNS multicast group on interface eth2.IPv4 with address 192.168.10.1.
Mar 15 16:27:01 mserver avahi-daemon[4756]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.1.107.
Mar 15 16:27:01 mserver exiting on signal 15
Mar 15 16:34:31 mserv syslogd 1.5.0#2ubuntu6: restart.
Mar 15 16:34:31 mserv kernel: Inspecting /boot/System.map-2.6.27-17-generic
Mar 15 16:34:31 mserv kernel: Cannot find map file.
Mar 15 16:34:31 mserv kernel: Loaded 49391 symbols from 88 modules.
Mar 15 16:34:31 mserv kernel: [    0.000000] Initializing cgroup subsys cpuset
Mar 15 16:34:31 mserv kernel: [    0.000000] Initializing cgroup subsys cpu
Mar 15 16:34:31 mserv kernel: [    0.000000] Linux version 2.6.27-17-generic (buildd@palmer) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Wed Jan 27 23:14:44 UTC 2010 (Ubuntu 2.6.27-17.45-generic)
Mar 15 16:34:31 mserv kernel: [    0.000000] BIOS-provided physical RAM map:
Mar 15 16:34:31 mserv kernel: [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Mar 15 16:34:31 mserv kernel: [    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Mar 15 16:34:31 mserv kernel: [    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Mar 15 16:34:31 mserv kernel: [    0.000000]  BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
Mar 15 16:34:31 mserv kernel: [    0.000000]  BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
Mar 15 16:34:31 mserv kernel: [    0.000000]  BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
Mar 15 16:34:31 mserv kernel: [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Mar 15 16:34:31 mserv kernel: [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Mar 15 16:34:31 mserv kernel: [    0.000000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Mar 15 16:34:31 mserv kernel: [    0.000000] DMI 2.2 present.
Mar 15 16:34:31 mserv kernel: [    0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
Mar 15 16:34:31 mserv kernel: [    0.000000] last_pfn = 0x1fff0 max_arch_pfn = 0x100000
Mar 15 16:34:31 mserv kernel: [    0.000000] kernel direct mapping tables up to 1fff0000 @ 10000-16000
Mar 15 16:34:31 mserv kernel: [    0.000000] RAMDISK: 1f80a000 - 1ffdf794
Mar 15 16:34:31 mserv kernel: [    0.000000] ACPI: RSDP 000F71B0, 0014 (r0 Nvidia)
Mar 15 16:34:31 mserv kernel: [    0.000000] ACPI: RSDT 1FFF3000, 002C (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
Mar 15 16:34:31 mserv kernel: [    0.000000] ACPI: FACP 1FFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
Mar 15 16:34:31 mserv kernel: [    0.000000] ACPI: DSDT 1FFF30C0, 4B46 (r1 NVIDIA AWRDACPI     1000 MSFT  100000E)
Mar 15 16:34:31 mserv kernel: [    0.000000] ACPI: FACS 1FFF0000, 0040
Mar 15 16:34:31 mserv kernel: [    0.000000] ACPI: APIC 1FFF7C40, 006E (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
Mar 15 16:34:31 mserv kernel: [    0.000000] 0MB HIGHMEM available.
Mar 15 16:34:31 mserv kernel: [    0.000000] 511MB LOWMEM available.
Mar 15 16:34:31 mserv kernel: [    0.000000]   mapped low ram: 0 - 1fff0000
Mar 15 16:34:31 mserv kernel: [    0.000000]   low ram: 00000000 - 1fff0000
Mar 15 16:34:31 mserv kernel: [    0.000000]   bootmap 00012000 - 00016000
Mar 15 16:34:31 mserv kernel: [    0.000000] (9 early reservations) ==> bootmem [0000000000 - 001fff0000]
Mar 15 16:34:31 mserv kernel: [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
Mar 15 16:34:31 mserv kernel: [    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
Mar 15 16:34:31 mserv kernel: [    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
Mar 15 16:34:31 mserv kernel: [    0.000000]   #3 [0000100000 - 00005c59e0]    TEXT DATA BSS ==> [0000100000 - 00005c59e0]
Mar 15 16:34:31 mserv kernel: [    0.000000]   #4 [001f80a000 - 001ffdf794]          RAMDISK ==> [001f80a000 - 001ffdf794]
Mar 15 16:34:31 mserv kernel: [    0.000000]   #5 [00005c6000 - 00005c9000]    INIT_PG_TABLE ==> [00005c6000 - 00005c9000]
Mar 15 16:34:31 mserv kernel: [    0.000000]   #6 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
Mar 15 16:34:31 mserv kernel: [    0.000000]   #7 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
Mar 15 16:34:31 mserv kernel: [    0.000000]   #8 [0000012000 - 0000016000]          BOOTMAP ==> [0000012000 - 0000016000]
Mar 15 16:34:31 mserv kernel: [    0.000000] Zone PFN ranges:
Mar 15 16:34:31 mserv kernel: [    0.000000]   DMA      0x00000010 -> 0x00001000
Mar 15 16:34:31 mserv kernel: [    0.000000]   Normal   0x00001000 -> 0x0001fff0
Mar 15 16:34:31 mserv kernel: [    0.000000]   HighMem  0x0001fff0 -> 0x0001fff0
Mar 15 16:34:31 mserv kernel: [    0.000000] Movable zone start PFN for each node
Mar 15 16:34:31 mserv kernel: [    0.000000] early_node_map[2] active PFN ranges
Mar 15 16:34:31 mserv kernel: [    0.000000]     0: 0x00000010 -> 0x0000009f
Mar 15 16:34:31 mserv kernel: [    0.000000]     0: 0x00000100 -> 0x0001fff0
Mar 15 16:34:31 mserv kernel: [    0.000000] On node 0 totalpages: 130943
Mar 15 16:34:31 mserv kernel: [    0.000000] free_area_init_node: node 0, pgdat c048d700, node_mem_map c1000240
Mar 15 16:34:31 mserv kernel: [    0.000000]   DMA zone: 3947 pages, LIFO batch:0
Mar 15 16:34:31 mserv kernel: [    0.000000]   Normal zone: 125844 pages, LIFO batch:31
Mar 15 16:34:31 mserv kernel: [    0.000000] Nvidia board detected. Ignoring ACPI timer override.
Mar 15 16:34:31 mserv kernel: [    0.000000] If you got timer trouble try acpi_use_timer_override
Mar 15 16:34:31 mserv kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x4008
Mar 15 16:34:31 mserv kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Mar 15 16:34:31 mserv kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Mar 15 16:34:31 mserv kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Mar 15 16:34:31 mserv kernel: [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Mar 15 16:34:31 mserv kernel: [    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
Mar 15 16:34:31 mserv kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Mar 15 16:34:31 mserv kernel: [    0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
Mar 15 16:34:31 mserv kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Mar 15 16:34:31 mserv kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
Mar 15 16:34:31 mserv kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
Mar 15 16:34:31 mserv kernel: [    0.000000] ACPI: IRQ9 used by override.
Mar 15 16:34:31 mserv kernel: [    0.000000] ACPI: IRQ14 used by override.
Mar 15 16:34:31 mserv kernel: [    0.000000] ACPI: IRQ15 used by override.
Mar 15 16:34:31 mserv kernel: [    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
Mar 15 16:34:31 mserv kernel: [    0.000000] Using ACPI (MADT) for SMP configuration information
Mar 15 16:34:31 mserv kernel: [    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
Mar 15 16:34:31 mserv kernel: [    0.000000] mapped APIC to ffffb000 (fee00000)
Mar 15 16:34:31 mserv kernel: [    0.000000] mapped IOAPIC to ffffa000 (fec00000)
Mar 15 16:34:31 mserv kernel: [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Mar 15 16:34:31 mserv kernel: [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
Mar 15 16:34:31 mserv kernel: [    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Mar 15 16:34:31 mserv kernel: [    0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
Mar 15 16:34:31 mserv kernel: [    0.000000] PERCPU: Allocating 41628 bytes of per cpu data
Mar 15 16:34:31 mserv kernel: [    0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1
Mar 15 16:34:31 mserv kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129791
Mar 15 16:34:31 mserv kernel: [    0.000000] Kernel command line: root=UUID=dc70049e-4781-4687-9e83-a8d0443dddca ro quiet splash
Mar 15 16:34:31 mserv kernel: [    0.000000] Enabling fast FPU save and restore... done.
Mar 15 16:34:31 mserv kernel: [    0.000000] Initializing CPU#0
Mar 15 16:34:31 mserv kernel: [    0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
Mar 15 16:34:31 mserv kernel: [    0.000000] TSC: PIT calibration confirmed by PMTIMER.
Mar 15 16:34:31 mserv kernel: [    0.000000] TSC: using PIT calibration value
Mar 15 16:34:31 mserv kernel: [    0.000000] Detected 952.143 MHz processor.
Mar 15 16:34:31 mserv kernel: [    0.004000] Console: colour VGA+ 80x25
Mar 15 16:34:31 mserv kernel: [    0.004000] console [tty0] enabled
Mar 15 16:34:31 mserv kernel: [    0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Mar 15 16:34:31 mserv kernel: [    0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mar 15 16:34:31 mserv kernel: [    0.004000] Memory: 505596k/524224k available (2581k kernel code, 18012k reserved, 1164k data, 428k init, 0k highmem)
Mar 15 16:34:31 mserv kernel: [    0.004000] virtual kernel memory layout:
Mar 15 16:34:31 mserv kernel: [    0.004000]     fixmap  : 0xffc77000 - 0xfffff000   (3616 kB)
Mar 15 16:34:31 mserv kernel: [    0.004000]     pkmap   : 0xff400000 - 0xff800000   (4096 kB)
Mar 15 16:34:31 mserv kernel: [    0.004000]     vmalloc : 0xe0800000 - 0xff3fe000   ( 491 MB)
Mar 15 16:34:31 mserv kernel: [    0.004000]     lowmem  : 0xc0000000 - 0xdfff0000   ( 511 MB)
Mar 15 16:34:31 mserv kernel: [    0.004000]       .init : 0xc04af000 - 0xc051a000   ( 428 kB)
Mar 15 16:34:31 mserv kernel: [    0.004000]       .data : 0xc038567c - 0xc04a8680   (1164 kB)
Mar 15 16:34:31 mserv kernel: [    0.004000]       .text : 0xc0100000 - 0xc038567c   (2581 kB)
Mar 15 16:34:31 mserv kernel: [    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
Mar 15 16:34:31 mserv kernel: [    0.004000] CPA: page pool initialized 1 of 1 pages preallocated
Mar 15 16:34:31 mserv kernel: [    0.004000] SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Mar 15 16:34:31 mserv kernel: [    0.004018] Calibrating delay loop (skipped), value calculated using timer frequency.. 1904.28 BogoMIPS (lpj=3808572)
Mar 15 16:34:31 mserv kernel: [    0.004061] Security Framework initialized
Mar 15 16:34:31 mserv kernel: [    0.004074] SELinux:  Disabled at boot.
Mar 15 16:34:31 mserv kernel: [    0.004131] AppArmor: AppArmor initialized
Mar 15 16:34:31 mserv kernel: [    0.004149] Mount-cache hash table entries: 512
Mar 15 16:34:31 mserv kernel: [    0.004494] Initializing cgroup subsys ns
Mar 15 16:34:31 mserv kernel: [    0.004505] Initializing cgroup subsys cpuacct
Mar 15 16:34:31 mserv kernel: [    0.004511] Initializing cgroup subsys memory
Mar 15 16:34:31 mserv kernel: [    0.004542] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Mar 15 16:34:31 mserv kernel: [    0.004550] CPU: L2 Cache: 64K (64 bytes/line)
Mar 15 16:34:31 mserv kernel: [    0.004577] Checking 'hlt' instruction... OK.
Mar 15 16:34:31 mserv kernel: [    0.020078] SMP alternatives: switching to UP code
Mar 15 16:34:31 mserv kernel: [    0.028049] Freeing SMP alternatives: 11k freed
Mar 15 16:34:31 mserv kernel: [    0.028058] ACPI: Core revision 20080609
Mar 15 16:34:31 mserv kernel: [    0.033518] ACPI: Checking initramfs for custom DSDT
Mar 15 16:34:31 mserv kernel: [    0.748388] ENABLING IO-APIC IRQs
Mar 15 16:34:31 mserv kernel: [    0.748602] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
Mar 15 16:34:31 mserv kernel: [    0.790088] CPU0: AMD Duron(tm) processor stepping 01
Mar 15 16:34:31 mserv kernel: [    0.792031] Brought up 1 CPUs
Mar 15 16:34:31 mserv kernel: [    0.792031] Total of 1 processors activated (1904.28 BogoMIPS).
Mar 15 16:34:31 mserv kernel: [    0.792031] CPU0 attaching NULL sched-domain.
Mar 15 16:34:31 mserv kernel: [    0.792031] net_namespace: 840 bytes
Mar 15 16:34:31 mserv kernel: [    0.792031] Booting paravirtualized kernel on bare hardware
Mar 15 16:34:31 mserv kernel: [    0.792031] Time: 16:32:06  Date: 03/15/10
Mar 15 16:34:31 mserv kernel: [    0.792031] NET: Registered protocol family 16
Mar 15 16:34:31 mserv kernel: [    0.792031] EISA bus registered
Mar 15 16:34:31 mserv kernel: [    0.792031] ACPI: bus type pci registered
Mar 15 16:34:31 mserv kernel: [    0.792031] PCI: PCI BIOS revision 2.10 entry at 0xfb460, last bus=2
Mar 15 16:34:31 mserv kernel: [    0.792031] PCI: Using configuration type 1 for base access
Mar 15 16:34:31 mserv kernel: [    0.795933] ACPI: EC: Look up EC in DSDT
Mar 15 16:34:31 mserv kernel: [    0.813910] ACPI: Interpreter enabled
Mar 15 16:34:31 mserv kernel: [    0.813924] ACPI: (supports S0 S1 S4 S5)
Mar 15 16:34:31 mserv kernel: [    0.813961] ACPI: Using IOAPIC for interrupt routing
Mar 15 16:34:31 mserv kernel: [    0.847312] ACPI: PCI Root Bridge [PCI0] (0000:00)
Mar 15 16:34:31 mserv kernel: [    0.847540] PCI: 0000:00:00.0 reg 10 32bit mmio: [e0000000, e3ffffff]
Mar 15 16:34:31 mserv kernel: [    0.847578] pci 0000:00:00.0: nForce2 C1 Halt Disconnect fixup
Mar 15 16:34:31 mserv kernel: [    0.847892] PCI: 0000:00:01.1 reg 10 io port: [e000, e01f]
Mar 15 16:34:31 mserv kernel: [    0.847951] pci 0000:00:01.1: PME# supported from D3hot D3cold
Mar 15 16:34:31 mserv kernel: [    0.847960] pci 0000:00:01.1: PME# disabled
Mar 15 16:34:31 mserv kernel: [    0.848000] PCI: 0000:00:02.0 reg 10 32bit mmio: [ea001000, ea001fff]
Mar 15 16:34:31 mserv kernel: [    0.848085] pci 0000:00:02.0: supports D1
Mar 15 16:34:31 mserv kernel: [    0.848090] pci 0000:00:02.0: supports D2
Mar 15 16:34:31 mserv kernel: [    0.848095] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
Mar 15 16:34:31 mserv kernel: [    0.848103] pci 0000:00:02.0: PME# disabled
Mar 15 16:34:31 mserv kernel: [    0.848136] PCI: 0000:00:02.1 reg 10 32bit mmio: [ea002000, ea002fff]
Mar 15 16:34:31 mserv kernel: [    0.848193] pci 0000:00:02.1: supports D1
Mar 15 16:34:31 mserv kernel: [    0.848197] pci 0000:00:02.1: supports D2
Mar 15 16:34:31 mserv kernel: [    0.848201] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
Mar 15 16:34:31 mserv kernel: [    0.848209] pci 0000:00:02.1: PME# disabled
Mar 15 16:34:31 mserv kernel: [    0.848250] PCI: 0000:00:02.2 reg 10 32bit mmio: [ea003000, ea0030ff]
Mar 15 16:34:31 mserv kernel: [    0.848317] pci 0000:00:02.2: supports D1
Mar 15 16:34:31 mserv kernel: [    0.848321] pci 0000:00:02.2: supports D2
Mar 15 16:34:31 mserv kernel: [    0.848326] pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold
Mar 15 16:34:31 mserv kernel: [    0.848334] pci 0000:00:02.2: PME# disabled
Mar 15 16:34:31 mserv kernel: [    0.848376] PCI: 0000:00:06.0 reg 10 io port: [d000, d0ff]
Mar 15 16:34:31 mserv kernel: [    0.848387] PCI: 0000:00:06.0 reg 14 io port: [d400, d47f]
Mar 15 16:34:31 mserv kernel: [    0.848397] PCI: 0000:00:06.0 reg 18 32bit mmio: [ea004000, ea004fff]
Mar 15 16:34:31 mserv kernel: [    0.848444] pci 0000:00:06.0: supports D1
Mar 15 16:34:31 mserv kernel: [    0.848448] pci 0000:00:06.0: supports D2
Mar 15 16:34:31 mserv kernel: [    0.848534] PCI: 0000:00:09.0 reg 20 io port: [f000, f00f]
Mar 15 16:34:31 mserv kernel: [    0.848676] PCI: 0000:02:04.0 reg 10 io port: [c000, c0ff]
Mar 15 16:34:31 mserv kernel: [    0.848688] PCI: 0000:02:04.0 reg 14 32bit mmio: [e7000000, e70000ff]
Mar 15 16:34:31 mserv kernel: [    0.848727] PCI: 0000:02:04.0 reg 30 32bit mmio: [0, ffff]
Mar 15 16:34:31 mserv kernel: [    0.848761] pci 0000:02:04.0: supports D1
Mar 15 16:34:31 mserv kernel: [    0.848765] pci 0000:02:04.0: supports D2
Mar 15 16:34:31 mserv kernel: [    0.848769] pci 0000:02:04.0: PME# supported from D1 D2 D3hot D3cold
Mar 15 16:34:31 mserv kernel: [    0.848778] pci 0000:02:04.0: PME# disabled
Mar 15 16:34:31 mserv kernel: [    0.848818] PCI: 0000:02:05.0 reg 10 io port: [c400, c4ff]
Mar 15 16:34:31 mserv kernel: [    0.848831] PCI: 0000:02:05.0 reg 14 32bit mmio: [e7001000, e70010ff]
Mar 15 16:34:31 mserv kernel: [    0.848897] pci 0000:02:05.0: supports D1
Mar 15 16:34:31 mserv kernel: [    0.848901] pci 0000:02:05.0: supports D2
Mar 15 16:34:31 mserv kernel: [    0.848906] pci 0000:02:05.0: PME# supported from D1 D2 D3hot
Mar 15 16:34:31 mserv kernel: [    0.848914] pci 0000:02:05.0: PME# disabled
Mar 15 16:34:31 mserv kernel: [    0.848965] PCI: bridge 0000:00:08.0 io port: [c000, cfff]
Mar 15 16:34:31 mserv kernel: [    0.848973] PCI: bridge 0000:00:08.0 32bit mmio: [e6000000, e7ffffff]
Mar 15 16:34:31 mserv kernel: [    0.849023] PCI: 0000:01:00.0 reg 10 32bit mmio: [e8000000, e8ffffff]
Mar 15 16:34:31 mserv kernel: [    0.849034] PCI: 0000:01:00.0 reg 14 32bit mmio: [e4000000, e5ffffff]
Mar 15 16:34:31 mserv kernel: [    0.849064] PCI: 0000:01:00.0 reg 30 32bit mmio: [0, ffff]
Mar 15 16:34:31 mserv kernel: [    0.849141] PCI: bridge 0000:00:1e.0 32bit mmio: [e8000000, e9ffffff]
Mar 15 16:34:31 mserv kernel: [    0.849150] PCI: bridge 0000:00:1e.0 32bit mmio pref: [e4000000, e5ffffff]
Mar 15 16:34:31 mserv kernel: [    0.849168] bus 00 -> node 0
Mar 15 16:34:31 mserv kernel: [    0.849200] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Mar 15 16:34:31 mserv kernel: [    0.849821] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
Mar 15 16:34:31 mserv kernel: [    0.850640] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
Mar 15 16:34:31 mserv kernel: [    0.988681] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Mar 15 16:34:31 mserv kernel: [    0.989199] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Mar 15 16:34:31 mserv kernel: [    0.989715] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Mar 15 16:34:31 mserv kernel: [    0.990230] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
Mar 15 16:34:31 mserv kernel: [    0.990740] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Mar 15 16:34:31 mserv kernel: [    0.991254] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Mar 15 16:34:31 mserv kernel: [    0.991763] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
Mar 15 16:34:31 mserv kernel: [    0.992319] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Mar 15 16:34:31 mserv kernel: [    0.992830] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Mar 15 16:34:31 mserv kernel: [    0.993343] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
Mar 15 16:34:31 mserv kernel: [    0.993851] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Mar 15 16:34:31 mserv kernel: [    0.994363] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Mar 15 16:34:31 mserv kernel: [    0.994881] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
Mar 15 16:34:31 mserv kernel: [    0.995393] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Mar 15 16:34:31 mserv kernel: [    0.995901] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Mar 15 16:34:31 mserv kernel: [    0.996435] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Mar 15 16:34:31 mserv kernel: [    0.996867] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
Mar 15 16:34:31 mserv kernel: [    0.997266] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
Mar 15 16:34:31 mserv kernel: [    0.997662] ACPI: PCI Interrupt Link [APC3] (IRQs *18)
Mar 15 16:34:31 mserv kernel: [    0.998056] ACPI: PCI Interrupt Link [APC4] (IRQs *19)
Mar 15 16:34:31 mserv kernel: [    0.998449] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
Mar 15 16:34:31 mserv kernel: [    0.999017] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
Mar 15 16:34:31 mserv kernel: [    0.999582] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0
Mar 15 16:34:31 mserv kernel: [    1.000178] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
Mar 15 16:34:31 mserv kernel: [    1.000748] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
Mar 15 16:34:31 mserv kernel: [    1.001312] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0
Mar 15 16:34:31 mserv kernel: [    1.001875] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
Mar 15 16:34:31 mserv kernel: [    1.002275] ACPI: PCI Interrupt Link [APCS] (IRQs *23)
Mar 15 16:34:31 mserv kernel: [    1.002833] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
Mar 15 16:34:31 mserv kernel: [    1.003393] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
Mar 15 16:34:31 mserv kernel: [    1.003955] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
Mar 15 16:34:31 mserv kernel: [    1.004543] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
Mar 15 16:34:31 mserv kernel: [    1.005160] Linux Plug and Play Support v0.97 (c) Adam Belay
Mar 15 16:34:31 mserv kernel: [    1.005263] pnp: PnP ACPI init
Mar 15 16:34:31 mserv kernel: [    1.005292] ACPI: bus type pnp registered
Mar 15 16:34:31 mserv kernel: [    1.024531] pnp: PnP ACPI: found 17 devices
Mar 15 16:34:31 mserv kernel: [    1.024539] ACPI: ACPI bus type pnp unregistered
Mar 15 16:34:31 mserv kernel: [    1.024549] PnPBIOS: Disabled by ACPI PNP
Mar 15 16:34:31 mserv kernel: [    1.025558] PCI: Using ACPI for IRQ routing
Mar 15 16:34:31 mserv kernel: [    1.025842] NET: Registered protocol family 8
Mar 15 16:34:31 mserv kernel: [    1.025842] NET: Registered protocol family 20
Mar 15 16:34:31 mserv kernel: [    1.025842] NetLabel: Initializing
Mar 15 16:34:31 mserv kernel: [    1.025842] NetLabel:  domain hash size = 128
Mar 15 16:34:31 mserv kernel: [    1.025842] NetLabel:  protocols = UNLABELED CIPSOv4
Mar 15 16:34:31 mserv kernel: [    1.025842] NetLabel:  unlabeled traffic allowed by default
Mar 15 16:34:31 mserv kernel: [    1.025842] tracer: 772 pages allocated for 65536 entries of 48 bytes
Mar 15 16:34:31 mserv kernel: [    1.025842]    actual entries 65620
Mar 15 16:34:31 mserv kernel: [    1.025842] AppArmor: AppArmor Filesystem Enabled
Mar 15 16:34:31 mserv kernel: [    1.025842] ACPI: RTC can wake from S4
Mar 15 16:34:31 mserv kernel: [    1.025842] system 00:00: ioport range 0x4000-0x407f has been reserved
Mar 15 16:34:31 mserv kernel: [    1.025842] system 00:00: ioport range 0x4080-0x40ff has been reserved
Mar 15 16:34:31 mserv kernel: [    1.025842] system 00:00: ioport range 0x4400-0x447f has been reserved
Mar 15 16:34:31 mserv kernel: [    1.025842] system 00:00: ioport range 0x4480-0x44ff has been reserved
Mar 15 16:34:31 mserv kernel: [    1.025842] system 00:00: ioport range 0x4200-0x427f has been reserved
Mar 15 16:34:31 mserv kernel: [    1.025842] system 00:00: ioport range 0x4280-0x42ff has been reserved
Mar 15 16:34:31 mserv kernel: [    1.025842] system 00:01: ioport range 0x5000-0x503f has been reserved
Mar 15 16:34:31 mserv kernel: [    1.025842] system 00:01: ioport range 0x5100-0x513f has been reserved
Mar 15 16:34:31 mserv kernel: [    1.025842] system 00:02: iomem range 0xf0000-0xf3fff could not be reserved
Mar 15 16:34:31 mserv kernel: [    1.025842] system 00:02: iomem range 0xf4000-0xf7fff could not be reserved
Mar 15 16:34:31 mserv kernel: [    1.025842] system 00:02: iomem range 0xf8000-0xfbfff could not be reserved
Mar 15 16:34:31 mserv kernel: [    1.025842] system 00:02: iomem range 0xfc000-0xfffff could not be reserved
Mar 15 16:34:31 mserv kernel: [    1.025842] system 00:02: iomem range 0x1fff0000-0x1fffffff could not be reserved
Mar 15 16:34:31 mserv kernel: [    1.025842] system 00:02: iomem range 0xffff0000-0xffffffff could not be reserved
Mar 15 16:34:31 mserv kernel: [    1.025842] system 00:02: iomem range 0x0-0x9ffff could not be reserved
Mar 15 16:34:31 mserv kernel: [    1.025842] system 00:02: iomem range 0x100000-0x1ffeffff could not be reserved
Mar 15 16:34:31 mserv kernel: [    1.025842] system 00:02: iomem range 0xfec00000-0xfec00fff could not be reserved
Mar 15 16:34:31 mserv kernel: [    1.025842] system 00:02: iomem range 0xfee00000-0xfee00fff could not be reserved
Mar 15 16:34:31 mserv kernel: [    1.025842] system 00:04: ioport range 0xb78-0xb7b has been reserved
Mar 15 16:34:31 mserv kernel: [    1.025842] system 00:04: ioport range 0xf78-0xf7b has been reserved
Mar 15 16:34:31 mserv kernel: [    1.025842] system 00:04: ioport range 0xa78-0xa7b has been reserved
Mar 15 16:34:31 mserv kernel: [    1.025842] system 00:04: ioport range 0xe78-0xe7b has been reserved
Mar 15 16:34:31 mserv kernel: [    1.025842] system 00:04: ioport range 0xbbc-0xbbf has been reserved
Mar 15 16:34:31 mserv kernel: [    1.025842] system 00:04: ioport range 0xfbc-0xfbf has been reserved
Mar 15 16:34:31 mserv kernel: [    1.025842] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
Mar 15 16:34:31 mserv kernel: [    1.025842] system 00:04: ioport range 0x294-0x297 has been reserved
Mar 15 16:34:31 mserv kernel: [    1.063619] pci 0000:00:08.0: PCI bridge, secondary bus 0000:02
Mar 15 16:34:31 mserv kernel: [    1.063629] pci 0000:00:08.0:   IO window: 0xc000-0xcfff
Mar 15 16:34:31 mserv kernel: [    1.063639] pci 0000:00:08.0:   MEM window: 0xe6000000-0xe7ffffff
Mar 15 16:34:31 mserv kernel: [    1.063649] pci 0000:00:08.0:   PREFETCH window: 0x00000030000000-0x000000300fffff
Mar 15 16:34:31 mserv kernel: [    1.063663] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
Mar 15 16:34:31 mserv kernel: [    1.063668] pci 0000:00:1e.0:   IO window: disabled
Mar 15 16:34:31 mserv kernel: [    1.063677] pci 0000:00:1e.0:   MEM window: 0xe8000000-0xe9ffffff
Mar 15 16:34:31 mserv kernel: [    1.063685] pci 0000:00:1e.0:   PREFETCH window: 0x000000e4000000-0x000000e5ffffff
Mar 15 16:34:31 mserv kernel: [    1.063710] pci 0000:00:08.0: setting latency timer to 64
Mar 15 16:34:31 mserv kernel: [    1.063723] bus: 00 index 0 io port: [0, ffff]
Mar 15 16:34:31 mserv kernel: [    1.063728] bus: 00 index 1 mmio: [0, ffffffff]
Mar 15 16:34:31 mserv kernel: [    1.063733] bus: 02 index 0 io port: [c000, cfff]
Mar 15 16:34:31 mserv kernel: [    1.063738] bus: 02 index 1 mmio: [e6000000, e7ffffff]
Mar 15 16:34:31 mserv kernel: [    1.063744] bus: 02 index 2 mmio: [30000000, 300fffff]
Mar 15 16:34:31 mserv kernel: [    1.063748] bus: 02 index 3 mmio: [0, 0]
Mar 15 16:34:31 mserv kernel: [    1.063753] bus: 01 index 0 mmio: [0, 0]
Mar 15 16:34:31 mserv kernel: [    1.063757] bus: 01 index 1 mmio: [e8000000, e9ffffff]
Mar 15 16:34:31 mserv kernel: [    1.063763] bus: 01 index 2 mmio: [e4000000, e5ffffff]
Mar 15 16:34:31 mserv kernel: [    1.063767] bus: 01 index 3 mmio: [0, 0]
Mar 15 16:34:31 mserv kernel: [    1.063795] NET: Registered protocol family 2
Mar 15 16:34:31 mserv kernel: [    1.064116] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Mar 15 16:34:31 mserv kernel: [    1.064628] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
Mar 15 16:34:31 mserv kernel: [    1.064861] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
Mar 15 16:34:31 mserv kernel: [    1.065090] TCP: Hash tables configured (established 16384 bind 16384)
Mar 15 16:34:31 mserv kernel: [    1.065099] TCP reno registered
Mar 15 16:34:31 mserv kernel: [    1.065322] NET: Registered protocol family 1
Mar 15 16:34:31 mserv kernel: [    1.065612] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0
Mar 15 16:34:31 mserv kernel: [    1.765199]  it is
Mar 15 16:34:31 mserv kernel: [    2.577998] Freeing initrd memory: 8021k freed
Mar 15 16:34:31 mserv kernel: [    2.579865] audit: initializing netlink socket (disabled)
Mar 15 16:34:31 mserv kernel: [    2.579900] type=2000 audit(1268670727.576:1): initialized
Mar 15 16:34:31 mserv kernel: [    2.592099] HugeTLB registered 4 MB page size, pre-allocated 0 pages
Mar 15 16:34:31 mserv kernel: [    2.599056] VFS: Disk quotas dquot_6.5.1
Mar 15 16:34:31 mserv kernel: [    2.599332] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Mar 15 16:34:31 mserv kernel: [    2.599635] msgmni has been set to 1003
Mar 15 16:34:31 mserv kernel: [    2.600055] io scheduler noop registered
Mar 15 16:34:31 mserv kernel: [    2.600064] io scheduler anticipatory registered
Mar 15 16:34:31 mserv kernel: [    2.600070] io scheduler deadline registered
Mar 15 16:34:31 mserv kernel: [    2.600118] io scheduler cfq registered (default)
Mar 15 16:34:31 mserv kernel: [    2.656124] pci 0000:01:00.0: Boot video device
Mar 15 16:34:31 mserv kernel: [    2.657089] isapnp: Scanning for PnP cards...
Mar 15 16:34:31 mserv kernel: [    3.011587] isapnp: No Plug & Play device found
Mar 15 16:34:31 mserv kernel: [    3.221681] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
Mar 15 16:34:31 mserv kernel: [    3.221934] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Mar 15 16:34:31 mserv kernel: [    3.222554] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Mar 15 16:34:31 mserv kernel: [    3.225154] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Mar 15 16:34:31 mserv kernel: [    3.226446] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Mar 15 16:34:31 mserv kernel: [    3.231561] brd: module loaded
Mar 15 16:34:31 mserv kernel: [    3.231781] input: Macintosh mouse button emulation as /devices/virtual/input/input0
Mar 15 16:34:31 mserv kernel: [    3.232152] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Mar 15 16:34:31 mserv kernel: [    3.234742] serio: i8042 KBD port at 0x60,0x64 irq 1
Mar 15 16:34:31 mserv kernel: [    3.234757] serio: i8042 AUX port at 0x60,0x64 irq 12
Mar 15 16:34:31 mserv kernel: [    3.236300] mice: PS/2 mouse device common for all mice
Mar 15 16:34:31 mserv kernel: [    3.236844] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
Mar 15 16:34:31 mserv kernel: [    3.236885] rtc0: alarms up to one year, y3k
Mar 15 16:34:31 mserv kernel: [    3.237249] EISA: Probing bus 0 at eisa.0
Mar 15 16:34:31 mserv kernel: [    3.237284] Cannot allocate resource for EISA slot 4
Mar 15 16:34:31 mserv kernel: [    3.237290] Cannot allocate resource for EISA slot 5
Mar 15 16:34:31 mserv kernel: [    3.237312] EISA: Detected 0 cards.
Mar 15 16:34:31 mserv kernel: [    3.237320] cpuidle: using governor ladder
Mar 15 16:34:31 mserv kernel: [    3.237325] cpuidle: using governor menu
Mar 15 16:34:31 mserv kernel: [    3.238573] TCP cubic registered
Mar 15 16:34:31 mserv kernel: [    3.238644] Using IPI No-Shortcut mode
Mar 15 16:34:31 mserv kernel: [    3.239681] registered taskstats version 1
Mar 15 16:34:31 mserv kernel: [    3.239928]   Magic number: 2:283:540
Mar 15 16:34:31 mserv kernel: [    3.240295] rtc_cmos 00:06: setting system clock to 2010-03-15 16:32:09 UTC (1268670729)
Mar 15 16:34:31 mserv kernel: [    3.240305] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
Mar 15 16:34:31 mserv kernel: [    3.240310] EDD information not available.
Mar 15 16:34:31 mserv kernel: [    3.241143] Freeing unused kernel memory: 428k freed
Mar 15 16:34:31 mserv kernel: [    3.241272] Write protecting the kernel text: 2584k
Mar 15 16:34:31 mserv kernel: [    3.241365] Write protecting the kernel read-only data: 940k
Mar 15 16:34:31 mserv kernel: [    3.265084] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Mar 15 16:34:31 mserv kernel: [    3.732100] fuse init (API version 7.9)
Mar 15 16:34:31 mserv kernel: [    3.948957] fan PNP0C0B:00: registered as cooling_device0
Mar 15 16:34:31 mserv kernel: [    3.948976] ACPI: Fan [FAN] (on)
Mar 15 16:34:31 mserv kernel: [    3.969205] processor ACPI0007:00: registered as cooling_device1
Mar 15 16:34:31 mserv kernel: [    3.977115] thermal LNXTHERM:01: registered as thermal_zone0
Mar 15 16:34:31 mserv kernel: [    3.979269] ACPI: Thermal Zone [THRM] (41 C)
Mar 15 16:34:31 mserv kernel: [    5.108400] Floppy drive(s): fd0 is 1.44M
Mar 15 16:34:31 mserv kernel: [    5.127965] FDC 0 is a post-1991 82077
Mar 15 16:34:31 mserv kernel: [    6.472652] usbcore: registered new interface driver usbfs
Mar 15 16:34:31 mserv kernel: [    6.472710] usbcore: registered new interface driver hub
Mar 15 16:34:31 mserv kernel: [    6.488491] No dock devices found.
Mar 15 16:34:31 mserv kernel: [    6.544150] usbcore: registered new device driver usb
Mar 15 16:34:31 mserv kernel: [    6.651696] SCSI subsystem initialized
Mar 15 16:34:31 mserv kernel: [    6.652905] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
Mar 15 16:34:31 mserv kernel: [    6.652928] ehci_hcd 0000:00:02.2: PCI INT C -> Link[APCL] -> GSI 22 (level, high) -> IRQ 22
Mar 15 16:34:31 mserv kernel: [    6.652956] ehci_hcd 0000:00:02.2: setting latency timer to 64
Mar 15 16:34:31 mserv kernel: [    6.652965] ehci_hcd 0000:00:02.2: EHCI Host Controller
Mar 15 16:34:31 mserv kernel: [    6.653104] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
Mar 15 16:34:31 mserv kernel: [    6.653165] ehci_hcd 0000:00:02.2: debug port 1
Mar 15 16:34:31 mserv kernel: [    6.653176] ehci_hcd 0000:00:02.2: cache line size of 64 is not supported
Mar 15 16:34:31 mserv kernel: [    6.653208] ehci_hcd 0000:00:02.2: irq 22, io mem 0xea003000
Mar 15 16:34:31 mserv kernel: [    6.664052] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Mar 15 16:34:31 mserv kernel: [    6.664432] usb usb1: configuration #1 chosen from 1 choice
Mar 15 16:34:31 mserv kernel: [    6.664501] hub 1-0:1.0: USB hub found
Mar 15 16:34:31 mserv kernel: [    6.664530] hub 1-0:1.0: 6 ports detected
Mar 15 16:34:31 mserv kernel: [    6.673968] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
Mar 15 16:34:31 mserv kernel: [    6.683093] 8139too Fast Ethernet driver 0.9.28
Mar 15 16:34:31 mserv kernel: [    6.755095] libata version 3.00 loaded.
Mar 15 16:34:31 mserv kernel: [    6.769694] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
Mar 15 16:34:31 mserv kernel: [    6.769716] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 21 (level, high) -> IRQ 21
Mar 15 16:34:31 mserv kernel: [    6.769748] ohci_hcd 0000:00:02.0: setting latency timer to 64
Mar 15 16:34:31 mserv kernel: [    6.769756] ohci_hcd 0000:00:02.0: OHCI Host Controller
Mar 15 16:34:31 mserv kernel: [    6.769852] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
Mar 15 16:34:31 mserv kernel: [    6.769903] ohci_hcd 0000:00:02.0: irq 21, io mem 0xea001000
Mar 15 16:34:31 mserv kernel: [    6.827330] usb usb2: configuration #1 chosen from 1 choice
Mar 15 16:34:31 mserv kernel: [    6.827407] hub 2-0:1.0: USB hub found
Mar 15 16:34:31 mserv kernel: [    6.827436] hub 2-0:1.0: 3 ports detected
Mar 15 16:34:31 mserv kernel: [    6.929606] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20
Mar 15 16:34:31 mserv kernel: [    6.929629] ohci_hcd 0000:00:02.1: PCI INT B -> Link[APCG] -> GSI 20 (level, high) -> IRQ 20
Mar 15 16:34:31 mserv kernel: [    6.929658] ohci_hcd 0000:00:02.1: setting latency timer to 64
Mar 15 16:34:31 mserv kernel: [    6.929667] ohci_hcd 0000:00:02.1: OHCI Host Controller
Mar 15 16:34:31 mserv kernel: [    6.929758] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
Mar 15 16:34:31 mserv kernel: [    6.929811] ohci_hcd 0000:00:02.1: irq 20, io mem 0xea002000
Mar 15 16:34:31 mserv kernel: [    6.986490] usb usb3: configuration #1 chosen from 1 choice
Mar 15 16:34:31 mserv kernel: [    6.986566] hub 3-0:1.0: USB hub found
Mar 15 16:34:31 mserv kernel: [    6.986593] hub 3-0:1.0: 3 ports detected
Mar 15 16:34:31 mserv kernel: [    7.088847] pata_acpi 0000:00:09.0: setting latency timer to 64
Mar 15 16:34:31 mserv kernel: [    7.089464] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
Mar 15 16:34:31 mserv kernel: [    7.089485] 8139too 0000:02:04.0: PCI INT A -> Link[APC4] -> GSI 19 (level, high) -> IRQ 19
Mar 15 16:34:31 mserv kernel: [    7.090704] eth0: RealTek RTL8139 at 0xc000, 00:0e:2e:79:e5:59, IRQ 19
Mar 15 16:34:31 mserv kernel: [    7.090712] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
Mar 15 16:34:31 mserv kernel: [    7.091234] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
Mar 15 16:34:31 mserv kernel: [    7.091251] 8139too 0000:02:05.0: PCI INT A -> Link[APC3] -> GSI 18 (level, high) -> IRQ 18
Mar 15 16:34:31 mserv kernel: [    7.092527] eth1: RealTek RTL8139 at 0xc400, 00:c0:26:25:d1:cb, IRQ 18
Mar 15 16:34:31 mserv kernel: [    7.092534] eth1:  Identified 8139 chip type 'RTL-8100B/8139D'
Mar 15 16:34:31 mserv kernel: [    7.107797] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
Mar 15 16:34:31 mserv kernel: [    7.119540] pata_amd 0000:00:09.0: version 0.3.10
Mar 15 16:34:31 mserv kernel: [    7.119659] pata_amd 0000:00:09.0: setting latency timer to 64
Mar 15 16:34:31 mserv kernel: [    7.126578] scsi0 : pata_amd
Mar 15 16:34:31 mserv kernel: [    7.126945] scsi1 : pata_amd
Mar 15 16:34:31 mserv kernel: [    7.128876] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
Mar 15 16:34:31 mserv kernel: [    7.128886] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
Mar 15 16:34:31 mserv kernel: [    7.292681] ata1.00: ATA-5: MAXTOR 6L040J2, A93.0500, max UDMA/133
Mar 15 16:34:31 mserv kernel: [    7.292692] ata1.00: 78177792 sectors, multi 16: LBA
Mar 15 16:34:31 mserv kernel: [    7.292729] ata1: nv_mode_filter: 0x7f39f&0x7f01f->0x7f01f, BIOS=0x7f000 (0xc7000000) ACPI=0x7f01f (15:600:0x13)
Mar 15 16:34:31 mserv kernel: [    7.308605] ata1.00: configured for UDMA/133
Mar 15 16:34:31 mserv kernel: [    7.472545] ata2.00: ATAPI: PLEXTOR CD-R   PX-W1610A, 1.04, max MWDMA2
Mar 15 16:34:31 mserv kernel: [    7.472586] ata2: nv_mode_filter: 0x39f&0x39f->0x39f, BIOS=0x0 (0xc7000000) ACPI=0x39f (120:600:0x12)
Mar 15 16:34:31 mserv kernel: [    7.488455] ata2.00: configured for MWDMA2
Mar 15 16:34:31 mserv kernel: [    7.488726] scsi 0:0:0:0: Direct-Access     ATA      MAXTOR 6L040J2   A93. PQ: 0 ANSI: 5
Mar 15 16:34:31 mserv kernel: [    7.489969] scsi 1:0:0:0: CD-ROM            PLEXTOR  CD-R   PX-W1610A 1.04 PQ: 0 ANSI: 5
Mar 15 16:34:31 mserv kernel: [    8.417295] scsi 0:0:0:0: Attached scsi generic sg0 type 0
Mar 15 16:34:31 mserv kernel: [    8.417423] scsi 1:0:0:0: Attached scsi generic sg1 type 5
Mar 15 16:34:31 mserv kernel: [    8.477303] Driver 'sd' needs updating - please use bus_type methods
Mar 15 16:34:31 mserv kernel: [    8.482133] sd 0:0:0:0: [sda] 78177792 512-byte hardware sectors (40027 MB)
Mar 15 16:34:31 mserv kernel: [    8.482179] sd 0:0:0:0: [sda] Write Protect is off
Mar 15 16:34:31 mserv kernel: [    8.482186] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Mar 15 16:34:31 mserv kernel: [    8.482251] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Mar 15 16:34:31 mserv kernel: [    8.482446] sd 0:0:0:0: [sda] 78177792 512-byte hardware sectors (40027 MB)
Mar 15 16:34:31 mserv kernel: [    8.482485] sd 0:0:0:0: [sda] Write Protect is off
Mar 15 16:34:31 mserv kernel: [    8.482492] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Mar 15 16:34:31 mserv kernel: [    8.482556] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Mar 15 16:34:31 mserv kernel: [    8.482567]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
Mar 15 16:34:31 mserv kernel: [    8.499182]  sda1 sda2 < sda5 > sda3 sda4
Mar 15 16:34:31 mserv kernel: [    8.528433] sd 0:0:0:0: [sda] Attached SCSI disk
Mar 15 16:34:31 mserv kernel: [    8.544594] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Mar 15 16:34:31 mserv kernel: [    8.544606] Uniform CD-ROM driver Revision: 3.20
Mar 15 16:34:31 mserv kernel: [    8.544858] sr 1:0:0:0: Attached scsi CD-ROM sr0
Mar 15 16:34:31 mserv kernel: [    9.145617] PM: Starting manual resume from disk
Mar 15 16:34:31 mserv kernel: [    9.145630] PM: Resume from partition 8:3
Mar 15 16:34:31 mserv kernel: [    9.145635] PM: Checking hibernation image.
Mar 15 16:34:31 mserv kernel: [    9.146001] PM: Resume from disk failed.
Mar 15 16:34:31 mserv kernel: [    9.197192] EXT3-fs: INFO: recovery required on readonly filesystem.
Mar 15 16:34:31 mserv kernel: [    9.197204] EXT3-fs: write access will be enabled during recovery.
Mar 15 16:34:31 mserv kernel: [   10.362974] kjournald starting.  Commit interval 5 seconds
Mar 15 16:34:31 mserv kernel: [   10.363011] EXT3-fs: recovery complete.
Mar 15 16:34:31 mserv kernel: [   10.364902] EXT3-fs: mounted filesystem with ordered data mode.
Mar 15 16:34:31 mserv kernel: [   17.379105] NET: Registered protocol family 10
Mar 15 16:34:31 mserv kernel: [   17.380259] lo: Disabled Privacy Extensions
Mar 15 16:34:31 mserv kernel: [   17.571483] udevd version 124 started
Mar 15 16:34:31 mserv kernel: [   19.356357] Linux agpgart interface v0.103
Mar 15 16:34:31 mserv kernel: [   19.428388] agpgart: Detected NVIDIA nForce2 chipset
Mar 15 16:34:31 mserv kernel: [   19.494783] agpgart-nvidia 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
Mar 15 16:34:31 mserv kernel: [   19.788519] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000
Mar 15 16:34:31 mserv kernel: [   19.788602] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5100
Mar 15 16:34:31 mserv kernel: [   20.127130] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
Mar 15 16:34:31 mserv kernel: [   20.140194] ACPI: Power Button (FF) [PWRF]
Mar 15 16:34:31 mserv kernel: [   20.140464] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
Mar 15 16:34:31 mserv kernel: [   20.156054] ACPI: Power Button (CM) [PWRB]
Mar 15 16:34:31 mserv kernel: [   20.176903] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Mar 15 16:34:31 mserv kernel: [   20.352081] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Mar 15 16:34:31 mserv kernel: [   22.662000] parport_pc 00:0c: reported by Plug and Play ACPI
Mar 15 16:34:31 mserv kernel: [   22.662075] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
Mar 15 16:34:31 mserv kernel: [   26.861022] udev: renamed network interface eth1 to eth2
Mar 15 16:34:31 mserv kernel: [   26.896548] input: PC Speaker as /devices/platform/pcspkr/input/input4
Mar 15 16:34:31 mserv kernel: [   27.125327] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
Mar 15 16:34:31 mserv kernel: [   27.125344] Intel ICH 0000:00:06.0: PCI INT A -> Link[APCJ] -> GSI 22 (level, high) -> IRQ 22
Mar 15 16:34:31 mserv kernel: [   27.125392] Intel ICH 0000:00:06.0: setting latency timer to 64
Mar 15 16:34:31 mserv kernel: [   27.448140] intel8x0_measure_ac97_clock: measured 52594 usecs
Mar 15 16:34:31 mserv kernel: [   27.448150] intel8x0: clocking to 47483
Mar 15 16:34:31 mserv kernel: [   27.614566] input: GenPS/2 Genius Mouse as /devices/platform/i8042/serio1/input/input5
Mar 15 16:34:31 mserv kernel: [   32.226940] lp0: using parport0 (interrupt-driven).
Mar 15 16:34:31 mserv kernel: [   32.513911] Adding 1020116k swap on /dev/sda3.  Priority:-1 extents:1 across:1020116k
Mar 15 16:34:31 mserv kernel: [   91.012296] EXT3 FS on sda4, internal journal
Mar 15 16:34:31 mserv kernel: [   92.288880] type=1505 audit(1268663618.299:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4439
Mar 15 16:34:31 mserv kernel: [   92.801697] type=1505 audit(1268663618.811:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4444
Mar 15 16:34:31 mserv kernel: [   92.802428] type=1505 audit(1268663618.811:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4444
Mar 15 16:34:31 mserv kernel: [   92.921084] type=1505 audit(1268663618.931:5): operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=4448
Mar 15 16:34:31 mserv kernel: [   93.057202] type=1505 audit(1268663619.067:6): operation="profile_load" name="/usr/sbin/named" name2="default" pid=4452
Mar 15 16:34:31 mserv kernel: [   93.219556] ip_tables: (C) 2000-2006 Netfilter Core Team
Mar 15 16:34:31 mserv kernel: [   93.395166] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
Mar 15 16:34:31 mserv kernel: [   93.395541] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
Mar 15 16:34:31 mserv kernel: [   93.395548] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
Mar 15 16:34:31 mserv kernel: [   93.395555] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
Mar 15 16:34:31 mserv kernel: [   93.594866] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Mar 15 16:34:31 mserv kernel: [   94.792304] NET: Registered protocol family 17
Mar 15 16:34:31 mserv kernel: [  104.016017] eth0: no IPv6 routers present
Mar 15 16:34:31 mserv kernel: [  144.265244] ACPI: WMI: Mapper loaded
Mar 15 16:34:31 mserv kernel: [  144.998584] powernow: No powernow capabilities detected
Mar 15 16:34:32 mserv kernel: [  146.125972] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
Mar 15 16:34:32 mserv avahi-daemon[5003]: Found user 'avahi' (UID 110) and group 'avahi' (GID 121).
Mar 15 16:34:32 mserv avahi-daemon[5003]: Successfully dropped root privileges.
Mar 15 16:34:32 mserv avahi-daemon[5003]: avahi-daemon 0.6.23 starting up.
Mar 15 16:34:32 mserv avahi-daemon[5003]: Successfully called chroot().
Mar 15 16:34:32 mserv avahi-daemon[5003]: Successfully dropped remaining capabilities.
Mar 15 16:34:32 mserv avahi-daemon[5003]: No service file found in /etc/avahi/services.
Mar 15 16:34:32 mserv avahi-daemon[5003]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.1.107.
Mar 15 16:34:32 mserv avahi-daemon[5003]: New relevant interface eth0.IPv4 for mDNS.
Mar 15 16:34:32 mserv avahi-daemon[5003]: Network interface enumeration completed.
Mar 15 16:34:32 mserv avahi-daemon[5003]: Registering new address record for fe80::20e:2eff:fe79:e559 on eth0.*.
Mar 15 16:34:32 mserv avahi-daemon[5003]: Registering new address record for 192.168.1.107 on eth0.IPv4.
Mar 15 16:34:32 mserv avahi-daemon[5003]: Registering HINFO record with values 'I686'/'LINUX'.
Mar 15 16:34:33 mserv avahi-daemon[5003]: Server startup complete. Host name is mserv.local. Local service cookie is 2870843965.
Mar 15 16:34:34 mserv named[5029]: starting BIND 9.5.0-P2.1 -u bind
Mar 15 16:34:34 mserv named[5029]: found 1 CPU, using 1 worker thread
Mar 15 16:34:34 mserv named[5029]: loading configuration from '/etc/bind/named.conf'
Mar 15 16:34:34 mserv kernel: [  148.208831] type=1503 audit(1268663674.219:7): operation="capable" name="sys_resource" pid=5030 profile="/usr/sbin/named"
Mar 15 16:34:34 mserv named[5029]: listening on IPv6 interfaces, port 53
Mar 15 16:34:34 mserv kernel: [  148.214966] type=1503 audit(1268663674.223:8): operation="inode_permission" requested_mask="::r" denied_mask="::r" fsuid=115 name="/proc/5029/net/if_inet6" pid=5030 profile="/usr/sbin/named"
Mar 15 16:34:34 mserv named[5029]: listening on IPv4 interface lo, 127.0.0.1#53
Mar 15 16:34:34 mserv named[5029]: listening on IPv4 interface eth0, 192.168.1.107#53
Mar 15 16:34:34 mserv named[5029]: default max-cache-size (33554432) applies
Mar 15 16:34:34 mserv named[5029]: automatic empty zone: 254.169.IN-ADDR.ARPA
Mar 15 16:34:34 mserv named[5029]: automatic empty zone: 2.0.192.IN-ADDR.ARPA
Mar 15 16:34:34 mserv named[5029]: automatic empty zone: 255.255.255.255.IN-ADDR.ARPA
Mar 15 16:34:34 mserv named[5029]: automatic empty zone: 0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.IP6.ARPA
Mar 15 16:34:34 mserv named[5029]: automatic empty zone: 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.IP6.ARPA
Mar 15 16:34:34 mserv named[5029]: automatic empty zone: D.F.IP6.ARPA
Mar 15 16:34:34 mserv named[5029]: automatic empty zone: 8.E.F.IP6.ARPA
Mar 15 16:34:34 mserv named[5029]: automatic empty zone: 9.E.F.IP6.ARPA
Mar 15 16:34:34 mserv named[5029]: automatic empty zone: A.E.F.IP6.ARPA
Mar 15 16:34:34 mserv named[5029]: automatic empty zone: B.E.F.IP6.ARPA
Mar 15 16:34:34 mserv named[5029]: default max-cache-size (33554432) applies: view _bind
Mar 15 16:34:34 mserv named[5029]: command channel listening on 127.0.0.1#953
Mar 15 16:34:34 mserv named[5029]: command channel listening on ::1#953
Mar 15 16:34:34 mserv kernel: [  148.259037] type=1503 audit(1268663674.267:9): operation="inode_permission" requested_mask="::r" denied_mask="::r" fsuid=115 name="/proc/5029/net/if_inet6" pid=5030 profile="/usr/sbin/named"
Mar 15 16:34:34 mserv named[5029]: zone 0.in-addr.arpa/IN: loaded serial 1
Mar 15 16:34:34 mserv named[5029]: zone 127.in-addr.arpa/IN: loaded serial 1
Mar 15 16:34:34 mserv named[5029]: zone 10.168.192.in-addr.arpa/IN: loaded serial 1
Mar 15 16:34:34 mserv named[5029]: zone 255.in-addr.arpa/IN: loaded serial 1
Mar 15 16:34:34 mserv named[5029]: zone localhost/IN: loaded serial 2
Mar 15 16:34:34 mserv named[5029]: zone mitko.mm/IN: loaded serial 3
Mar 15 16:34:34 mserv named[5029]: running
Mar 15 16:34:35 mserv mysqld_safe[5146]: started
Mar 15 16:34:35 mserv mysqld[5150]: 100315 16:34:35  InnoDB: Started; log sequence number 0 43655
Mar 15 16:34:36 mserv mysqld[5150]: 100315 16:34:36 [Note] /usr/sbin/mysqld: ready for connections.
Mar 15 16:34:36 mserv mysqld[5150]: Version: '5.0.67-0ubuntu6.1'  socket: '/var/run/mysqld/mysqld.sock'  port: 3306  (Ubuntu)
Mar 15 16:34:36 mserv /etc/mysql/debian-start[5188]: Upgrading MySQL tables if necessary.
Mar 15 16:34:36 mserv kernel: [  150.682378] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
Mar 15 16:34:36 mserv kernel: [  150.682393] apm: overridden by ACPI.
Mar 15 16:34:36 mserv /etc/mysql/debian-start[5195]: Looking for 'mysql' in: /usr/bin/mysql
Mar 15 16:34:36 mserv /etc/mysql/debian-start[5195]: Looking for 'mysqlcheck' in: /usr/bin/mysqlcheck
Mar 15 16:34:36 mserv /etc/mysql/debian-start[5195]: This installation of MySQL is already upgraded to 5.0.67, use --force if you still need to run mysql_upgrade
Mar 15 16:34:36 mserv /etc/mysql/debian-start[5212]: Checking for insecure root accounts.
Mar 15 16:34:36 mserv /etc/mysql/debian-start[5221]: Triggering myisam-recover for all MyISAM tables
Mar 15 16:34:37 mserv kernel: [  150.996552] ppdev: user-space parallel port driver
Mar 15 16:34:38 mserv acpid: client connected from 5435[111:122]
Mar 15 16:34:39 mserv bluetoothd[5485]: Bluetooth daemon
Mar 15 16:34:39 mserv kernel: [  153.706011] Bluetooth: Core ver 2.13
Mar 15 16:34:39 mserv kernel: [  153.709833] NET: Registered protocol family 31
Mar 15 16:34:39 mserv kernel: [  153.709845] Bluetooth: HCI device and connection manager initialized
Mar 15 16:34:39 mserv kernel: [  153.709855] Bluetooth: HCI socket layer initialized
Mar 15 16:34:39 mserv bluetoothd[5485]: Starting SDP server
Mar 15 16:34:39 mserv kernel: [  153.748349] Bluetooth: L2CAP ver 2.11
Mar 15 16:34:39 mserv kernel: [  153.748361] Bluetooth: L2CAP socket layer initialized
Mar 15 16:34:39 mserv kernel: [  153.769016] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Mar 15 16:34:39 mserv kernel: [  153.769029] Bluetooth: BNEP filters: protocol multicast
Mar 15 16:34:39 mserv kernel: [  153.808978] Bridge firewalling registered
Mar 15 16:34:39 mserv bluetoothd[5485]: bridge pan0 created
Mar 15 16:34:39 mserv kernel: [  153.831505] Bluetooth: SCO (Voice Link) ver 0.6
Mar 15 16:34:39 mserv kernel: [  153.831519] Bluetooth: SCO socket layer initialized
Mar 15 16:34:39 mserv bluetoothd[5485]: Starting experimental netlink support
Mar 15 16:34:39 mserv bluetoothd[5485]: Failed to find Bluetooth netlink family
Mar 15 16:34:39 mserv bluetoothd[5485]: Can't init plugin /usr/lib/bluetooth/plugins/netlink.so
Mar 15 16:34:39 mserv kernel: [  153.914057] Bluetooth: RFCOMM socket layer initialized
Mar 15 16:34:39 mserv kernel: [  153.914671] Bluetooth: RFCOMM TTY layer initialized
Mar 15 16:34:39 mserv kernel: [  153.914691] Bluetooth: RFCOMM ver 1.10
Mar 15 16:34:40 mserv acpid: client connected from 5546[0:0]
Mar 15 16:34:40 mserv dhcpd: Internet Systems Consortium DHCP Server V3.1.1
Mar 15 16:34:40 mserv dhcpd: Copyright 2004-2008 Internet Systems Consortium.
Mar 15 16:34:40 mserv dhcpd: All rights reserved.
Mar 15 16:34:40 mserv dhcpd: For info, please visit http://www.isc.org/sw/dhcp/
Mar 15 16:34:40 mserv dhcpd: Wrote 1 leases to leases file.
Mar 15 16:34:40 mserv dhcpd:
Mar 15 16:34:40 mserv dhcpd: No subnet declaration for eth2 (0.0.0.0).
Mar 15 16:34:40 mserv dhcpd: ** Ignoring requests on eth2.  If this is not what
Mar 15 16:34:40 mserv dhcpd:    you want, please write a subnet declaration
Mar 15 16:34:40 mserv dhcpd:    in your dhcpd.conf file for the network segment
Mar 15 16:34:40 mserv dhcpd:    to which interface eth2 is attached. **
Mar 15 16:34:40 mserv dhcpd:
Mar 15 16:34:40 mserv dhcpd:
Mar 15 16:34:40 mserv dhcpd: Not configured to listen on any interfaces!
Mar 15 16:34:43 mserv gdmgreeter[5593]: Gtk-WARNING: Темата не може да бъде открита в пътя с модули: „ubuntulooks“,
Mar 15 16:34:46 mserv NetworkManager: <info>  starting...
Mar 15 16:34:46 mserv NetworkManager: <info>  eth2: driver is '8139too'.
Mar 15 16:34:46 mserv NetworkManager: <info>  Found new Ethernet device 'eth2'.
Mar 15 16:34:46 mserv NetworkManager: <info>  (eth2): exported as /org/freedesktop/Hal/devices/net_00_c0_26_25_d1_cb
Mar 15 16:34:46 mserv NetworkManager: <info>  eth0: driver is '8139too'.
Mar 15 16:34:46 mserv NetworkManager: <info>  Found new Ethernet device 'eth0'.
Mar 15 16:34:46 mserv NetworkManager: <info>  (eth0): exported as /org/freedesktop/Hal/devices/net_00_0e_2e_79_e5_59
Mar 15 16:34:46 mserv NetworkManager: <info>  Trying to start the supplicant...
Mar 15 16:34:46 mserv NetworkManager: &
Активен

mitkomihov

  • Напреднали
  • *****
  • Публикации: 15
  • Distribution: Ubuntu 8.10 server
    • Профил
    • WWW
Re: Проблеми с eth2, BIND на Ubuntu 8.10 Desktop
« Отговор #5 -: Mar 15, 2010, 16:52 »
допълнение

Mar 15 16:34:46 mserv NetworkManager: <info>  Trying to start the system settings daemon...
Mar 15 16:34:46 mserv NetworkManager: <info>  (eth0): carrier now ON (device state 1)
Mar 15 16:34:46 mserv anacron[5642]: Anacron 2.3 started on 2010-03-15
Mar 15 16:34:46 mserv nm-system-settings:    SCPlugin-Ifupdown: init!
Mar 15 16:34:46 mserv nm-system-settings:    SCPlugin-Ifupdown: update_system_hostname
Mar 15 16:34:46 mserv anacron[5642]: Normal exit (0 jobs run)
Mar 15 16:34:46 mserv nm-system-settings:    SCPluginIfupdown: guessed connection type (eth0) = 802-3-ethernet
Mar 15 16:34:46 mserv nm-system-settings:    SCPlugin-Ifupdown: update_connection_setting_from_if_block: name:eth0, type:802-3-ethernet, autoconnect:0, id:Ifupdown (eth0), uuid: 681b428f-0000-0000-0000-000039000000
Mar 15 16:34:46 mserv nm-system-settings:    SCPluginIfupdown: guessed connection type (eth2) = 802-3-ethernet
Mar 15 16:34:46 mserv nm-system-settings:    SCPlugin-Ifupdown: update_connection_setting_from_if_block: name:eth2, type:802-3-ethernet, autoconnect:0, id:Ifupdown (eth2), uuid: 226544c9-0000-0000-0000-000011000000
Mar 15 16:34:46 mserv nm-system-settings:    SCPlugin-Ifupdown: addresses count: 1
Mar 15 16:34:46 mserv nm-system-settings:    SCPlugin-Ifupdown: No dns-nameserver configured in /etc/network/interfaces
Mar 15 16:34:46 mserv nm-system-settings:    SCPlugin-Ifupdown: autoconnect
Mar 15 16:34:46 mserv nm-system-settings:    SCPlugin-Ifupdown: autoconnect
Mar 15 16:34:46 mserv nm-system-settings:    SCPluginIfupdown: management mode: unmanaged
Mar 15 16:34:46 mserv nm-system-settings:    SCPlugin-Ifupdown: device added (udi: /org/freedesktop/Hal/devices/net_00_c0_26_25_d1_cb, iface: eth2): well known
Mar 15 16:34:46 mserv nm-system-settings:    Ifupdown: get unmanaged devices count: 1
Mar 15 16:34:46 mserv nm-system-settings:    SCPlugin-Ifupdown: (162058528) ... get_connections.
Mar 15 16:34:46 mserv nm-system-settings:    SCPlugin-Ifupdown: (162058528) ... get_connections (managed=false): return empty list.
Mar 15 16:34:46 mserv nm-system-settings:    Ifupdown: get unmanaged devices count: 1
Mar 15 16:34:46 mserv nm-system-settings:    SCPlugin-Ifupdown: device added (udi: /org/freedesktop/Hal/devices/net_00_0e_2e_79_e5_59, iface: eth0): well known
Mar 15 16:34:46 mserv nm-system-settings:    Ifupdown: get unmanaged devices count: 2
Mar 15 16:34:46 mserv nm-system-settings:    SCPlugin-Ifupdown: end _init.
Mar 15 16:34:46 mserv nm-system-settings: Loaded plugin ifupdown: (C) 2008 Canonical Ltd.  To report bugs please use the NetworkManager mailing list.
Mar 15 16:34:46 mserv nm-system-settings: Loaded plugin keyfile: (c) 2007 - 2008 Red Hat, Inc.  To report bugs please use the NetworkManager mailing list.
Mar 15 16:34:46 mserv NetworkManager: <info>  (eth2): now unmanaged
Mar 15 16:34:46 mserv NetworkManager: <info>  (eth0): now unmanaged
Mar 15 16:34:47 mserv /usr/sbin/cron[5687]: (CRON) INFO (pidfile fd = 3)
Mar 15 16:34:47 mserv /usr/sbin/cron[5688]: (CRON) STARTUP (fork ok)
Mar 15 16:34:47 mserv /usr/sbin/cron[5688]: (CRON) INFO (Running @reboot jobs)
Mar 15 16:34:53 mserv pulseaudio[5949]: ltdl-bind-now.c: Failed to find original dlopen loader.
Mar 15 16:34:53 mserv pulseaudio[5951]: main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
Mar 15 16:34:53 mserv pulseaudio[5951]: main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
Mar 15 16:34:55 mserv x-session-manager[5859]: WARNING: Unable to find provider 'gnome-wm' of required component 'windowmanager'
Mar 15 16:36:29 mserv NetworkManager: <info>  Unmanaged Device found; state CONNECTED forced. (see http://bugs.launchpad.net/bugs/191889)
Mar 15 16:36:29 mserv NetworkManager: <info>  Unmanaged Device found; state CONNECTED forced. (see http://bugs.launchpad.net/bugs/191889)
Активен

mitkomihov

  • Напреднали
  • *****
  • Публикации: 15
  • Distribution: Ubuntu 8.10 server
    • Профил
    • WWW
Re: Проблеми с eth2, BIND на Ubuntu 8.10 Desktop
« Отговор #6 -: Mar 15, 2010, 16:55 »
А също и това от терминала:

mitko@mserv:~$ ping 192.168.1.1
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=1.08 ms
64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=0.648 ms
64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=0.691 ms
^C
--- 192.168.1.1 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2002ms
rtt min/avg/max/mdev = 0.648/0.807/1.083/0.197 ms
mitko@mserv:~$ ping http://www.dir.bg
PING dir.bg (194.145.63.12) 56(84) bytes of data.
64 bytes from dir.bg (194.145.63.12): icmp_seq=1 ttl=58 time=14.1 ms
64 bytes from dir.bg (194.145.63.12): icmp_seq=2 ttl=58 time=14.1 ms
64 bytes from dir.bg (194.145.63.12): icmp_seq=3 ttl=58 time=15.2 ms
^C
--- dir.bg ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2008ms
rtt min/avg/max/mdev = 14.154/14.534/15.253/0.526 ms
mitko@mserv:~$ ifconfig
eth0      Link encap:Ethernet  HWaddr 00:0e:2e:79:e5:59 
          inet addr:192.168.1.107  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::20e:2eff:fe79:e559/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:20 errors:0 dropped:0 overruns:0 frame:0
          TX packets:40 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:2479 (2.4 KB)  TX bytes:5414 (5.4 KB)
          Interrupt:19 Base address:0xc000

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:16 errors:0 dropped:0 overruns:0 frame:0
          TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:800 (800.0 B)  TX bytes:800 (800.0 B)

mitko@mserv:~$ ifconfig -a
eth0      Link encap:Ethernet  HWaddr 00:0e:2e:79:e5:59 
          inet addr:192.168.1.107  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::20e:2eff:fe79:e559/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1344 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1501 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:1068066 (1.0 MB)  TX bytes:381733 (381.7 KB)
          Interrupt:19 Base address:0xc000

eth2      Link encap:Ethernet  HWaddr 00:c0:26:25:d1:cb 
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:18 Base address:0xc400

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:16 errors:0 dropped:0 overruns:0 frame:0
          TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:800 (800.0 B)  TX bytes:800 (800.0 B)

pan0      Link encap:Ethernet  HWaddr aa:5f:bb:e8:17:ec 
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

Активен

mitkomihov

  • Напреднали
  • *****
  • Публикации: 15
  • Distribution: Ubuntu 8.10 server
    • Профил
    • WWW
Re: Проблеми с eth2, BIND на Ubuntu 8.10 Desktop
« Отговор #7 -: Mar 17, 2010, 16:33 »
Благодаря на Ачо за помощта. И на НЕВОЛЯТА ...
За тези със същия или подобен проблем ще кажа как си оправих проблема, но първо ще споделя някои мисли за различните дистрибуции.

1. Нито една не е довършена на 100%. Какво имам пред вид:

Ubuntu - от опита ми досега - рекламират десктоп едишъна като изцяло потребителски ориентирана. Оказва се, че освен това, което получаваш като стандартна инсталация, всичко друго можеш да го направиш само от командния ред, евентуално ... Ако решиш да си пуснеш нещо допълнително като услуга, рискуваш да събориш къщичката от карти, която се крепи едвам-едвам.
Конкретно "нетуърк мениджъра" създава проблеми на "БИНД" (пиша на кирилица, понеже страницата ми бърка настройките за промяна на лейаута на клавиатурата по странен начин и латиницата идва сегиз-тогиз) и няма оправяне ...

Mandriva - рекламират ти Лайв СД, което по традиция би трябвало да става за инсталация на харда. Да ама не, първо чакаш 2 часа да се натутка със зареждане от СД-то ( не всички сме с нови машини ), след което ти предлага инсталация, след още 1 час разбираш, че си получи система с ограничена функционалност. Ако искаш повече - дръпни си другото издание, което е на ДВД ... Да го бяха написали в началото!
Обаче, хората мислят за теб и можеш да си запишеш само бутващо СД, а после да продължиш от мирър инсталацията. Перфектно! Да ама не - записваш, бутваш, инсталацията започва и точно след форматиране на дяловете ти съобщава, че му липсва файл и единствената опция е "вълшебното копче". От което си скапваш Уиндоуса. За по-пълно щастие.

А сега по темата: реших си проблема, като инсталирах "Убунту 8.04 сървър".
Първият път инсталирах с всички опции, които сметнах, че ще са ми необходими LAMP, DNS, OpenSSH. Оказа се, че така не мога да подкарам DHCP сървъра. На второто инсталиране избрах само OpenSSH и след това добавях всичко останало едно след друго.
Е те това е чалъма!
Активен