Изпечатай

[Pavlik]

http://prikachi.com/files/1526037e.png
Защо така С ново cd/dvd устройство съм чисто ново закупено преди 1 ден ??

[bop_bop_mara]

Я да видим fstab-а

[borovaka]

Я пробвай като root да напишеш gpasswd -a потребителскототииме optical рестартирай KDEто и опитай да отвориш.

[Pavlik]

Fstab

/dev/sda1        /                ext3        defaults         1   1
#/dev/cdrom      /mnt/cdrom       auto        noauto,owner,ro  0   0
/dev/fd0         /mnt/floppy      auto        noauto,owner     0   0
devpts           /dev/pts         devpts      gid=5,mode=620   0   0
proc             /proc            proc        defaults         0   0
tmpfs            /dev/shm         tmpfs       defaults         0   0

[b2l]

Разкоментирай 2-рия ред.

[Pavlik]

Разкоментирай 2-рия ред.

Стана но в диска няма нищо... защо така по принцип има дебиян ?
Пробах така да го монтирам ръчно


/dev/sda1        /                ext3        defaults         1   1
/dev/cdrom      /mnt/cdrom       auto        noauto,owner,ro  0   0
/dev/sr0        /mnt/dvd          auto      noauto.owner,ro 0  0
/dev/fd0         /mnt/floppy      auto        noauto,owner     0   0
devpts           /dev/pts         devpts      gid=5,mode=620   0   0
proc             /proc            proc        defaults         0   0
tmpfs            /dev/shm         tmpfs       defaults         0   0

http://prikachi.com/files/1526129b.png

[ROKO__]

Не е длъжно да разкоментира реда в fstab, то няма особено значение, по важно е HAL как е настроен ако той не е компилиран с флагове за автомонтиране забрави да се показват дисковете сами

[Bagatur]

Пробваи да го направиш ето така но преди това изпълни
#cp /etc/fstab /etc/fstab.backup
/dev/cdrom      /mnt/cdrom    udf,iso9660 user,noauto     0       0

след което рестартирай

[ROKO__]

Ето как изглежда моят fstab с който всичко е безпроблемно

Gentoo ~ # cat /etc/fstab
# /etc/fstab: static file system information.
#
# noatime turns off atimes for increased performance (atimes normally aren't
# needed; notail increases performance of ReiserFS (at the expense of storage
# efficiency).  It's safe to drop the noatime options if you want and to
# switch between notail / tail freely.
#
# The root filesystem should have a pass number of either 0 or 1.
# All other filesystems should have a pass number of 0 or greater than 1.
#
# See the manpage fstab(5) for more information.
#

# <fs>         <mountpoint>   <type>      <opts>      <dump/pass>

# NOTE: If your BOOT partition is ReiserFS, add the notail option to opts.
#/dev/BOOT      /boot      ext2      noauto,noatime   1 2
/dev/sda3      /      ext3      noatime      0 1
/dev/sda1      none      swap      sw      0 0
/dev/sda5             /media/arch       ext4            noauto,noatime  0 4
/dev/sda6            /media/storage     ext3            noauto,noatime  0 2
/dev/sdb2           /media/storage-2    ext3            noauto,noatime  0 3
#/dev/cdrom      /media/cdrom   auto      noauto,ro   0 0
#/dev/fd0      /mnt/floppy   auto      noauto      0 0

# glibc 2.2 and above expects tmpfs to be mounted at /dev/shm for
# POSIX shared memory (shm_open, shm_unlink).
# (tmpfs is a dynamically expandable/shrinkable ramdisk, and will
#  use almost no memory if not populated with files)
shm         /dev/shm   tmpfs      nodev,nosuid,noexec   0 0
# none                    /selinux        selinuxfs       defaults        0 0

#none                    /var/tmp/portage   tmpfs  size=2048M,nr_inodes=1M         0 0

tmp     /tmp      tmpfs rw,mode=1777 0 0
#vartmp  /var/tmp  tmpfs rw,mode=1777 0 0
Gentoo ~ #

[Bagatur]

Ето как изглежда моят fstab с който всичко е безпроблемно

Gentoo ~ # cat /etc/fstab
# /etc/fstab: static file system information.
#
# noatime turns off atimes for increased performance (atimes normally aren't
# needed; notail increases performance of ReiserFS (at the expense of storage
# efficiency).  It's safe to drop the noatime options if you want and to
# switch between notail / tail freely.
#
# The root filesystem should have a pass number of either 0 or 1.
# All other filesystems should have a pass number of 0 or greater than 1.
#
# See the manpage fstab(5) for more information.
#

# <fs>         <mountpoint>   <type>      <opts>      <dump/pass>

# NOTE: If your BOOT partition is ReiserFS, add the notail option to opts.
#/dev/BOOT      /boot      ext2      noauto,noatime   1 2
/dev/sda3      /      ext3      noatime      0 1
/dev/sda1      none      swap      sw      0 0
/dev/sda5             /media/arch       ext4            noauto,noatime  0 4
/dev/sda6            /media/storage     ext3            noauto,noatime  0 2
/dev/sdb2           /media/storage-2    ext3            noauto,noatime  0 3
#/dev/cdrom      /media/cdrom   auto      noauto,ro   0 0
#/dev/fd0      /mnt/floppy   auto      noauto      0 0

# glibc 2.2 and above expects tmpfs to be mounted at /dev/shm for
# POSIX shared memory (shm_open, shm_unlink).
# (tmpfs is a dynamically expandable/shrinkable ramdisk, and will
#  use almost no memory if not populated with files)
shm         /dev/shm   tmpfs      nodev,nosuid,noexec   0 0
# none                    /selinux        selinuxfs       defaults        0 0

#none                    /var/tmp/portage   tmpfs  size=2048M,nr_inodes=1M         0 0

tmp     /tmp      tmpfs rw,mode=1777 0 0
#vartmp  /var/tmp  tmpfs rw,mode=1777 0 0
Gentoo ~ #

/off-topic

само дето дистрото на човека е Debian а не Gentoo

[go_fire]

E то ефестаба е един за всички, тъй че едва ли е проблем. Ама Роко как разбра, че ползват един и същ вид свързване на дисковете и деление на дяловете, не знам.

[Pavlik]

/dev/sda1        /                ext3        defaults         1   1
/dev/cdrom      /mnt/cdrom       auto        noauto,owner,ro   0   0
devpts           /dev/pts         devpts      gid=5,mode=620   0   0
proc             /proc            proc        defaults         0   0
tmpfs            /dev/shm         tmpfs       defaults         0   0
/dev/cdrom      /mnt/cdrom      iso9660     ro              0   0
/dev/sr0        /mnt/dvd          auto      noauto.owner,ro 0  0

други грешки
sr 2:0:1:0: [sr0] Result: hostbyte=0x00 driverbyte=0x08
sr 2:0:1:0: [sr0] Sense Key : 0x5 [current]
sr 2:0:1:0: [sr0] ASC=0x21 ASCQ=0x0
end_request: I/O error, dev sr0, sector 0
Buffer I/O error on device sr0, logical block 0
sr 2:0:1:0: [sr0] Result: hostbyte=0x00 driverbyte=0x08
sr 2:0:1:0: [sr0] Sense Key : 0x5 [current]
sr 2:0:1:0: [sr0] ASC=0x21 ASCQ=0x0
end_request: I/O error, dev sr0, sector 0
Buffer I/O error on device sr0, logical block 0

cdparanoia -vsQ
cdparanoia III release 10.2 (September 11, 2008)

Using cdda library version: 10.2
Using paranoia library version: 10.2
Checking /dev/cdrom for cdrom...
        Testing /dev/cdrom for SCSI/MMC interface
                SG_IO device: /dev/sr0

CDROM model sensed sensed: TSSTcorp CDDVDW SH-S223C SB01

Checking for SCSI emulation...
        Drive is ATAPI (using SG_IO host adaptor emulation)

Checking for MMC style command set...
        Drive is MMC style
        DMA scatter/gather table entries: 1
        table entry size: 131072 bytes
        maximum theoretical transfer: 55 sectors
        Setting default read size to 27 sectors (63504 bytes).

Verifying CDDA command set...
        Could not find any audio tracks on this disk.

Unable to open disc.

Help ?