Автор Тема: тvtime  (Прочетена 1168 пъти)

ubunturoot

  • Напреднали
  • *****
  • Публикации: 165
    • Профил
тvtime
« -: Feb 17, 2012, 00:40 »
Здр реших да подкарам тв тунера Hauppauge wintv-hvr 930C ( usb,dvb-c,dvb-t ) под линукс и започнах да се ровя в интернет и открих че с тvtime може да се подкара и под ubuntu(в моя случай).Инсталирах си го следвайки в този сайт беше казано че да го сложа настройките на pal и после на europe. Добре като го стартирах няма сигнал тогава тръгнах да сканирам за канали но тази опция е не е достъпна затова реших да прегледам в интернет за настройване на програмата но пак нищо.Искам да питам някой има ли идея как да го настроя?Изришно съм проверил че този модел тунер върви под линук.
Активен

AMD

  • Напреднали
  • *****
  • Публикации: 873
  • Distribution: Calculate Linux Scratch 64 / Alt Linux Centaurus 6.0 64
  • Window Manager: Gnome 2.32/3.2 XFCE 4.8/4.10-git
  • AMD Athlon64/Sempron64 4000+Dual Core/3400+
    • Профил
Re: тvtime
« Отговор #1 -: Feb 17, 2012, 10:16 »
Здр реших да подкарам тв тунера Hauppauge wintv-hvr 930C ( usb,dvb-c,dvb-t ) под линукс и започнах да се ровя в интернет и открих че с тvtime може да се подкара и под ubuntu(в моя случай).Инсталирах си го следвайки в този сайт беше казано че да го сложа настройките на pal и после на europe. Добре като го стартирах няма сигнал тогава тръгнах да сканирам за канали но тази опция е не е достъпна затова реших да прегледам в интернет за настройване на програмата но пак нищо.Искам да питам някой има ли идея как да го настроя?Изришно съм проверил че този модел тунер върви под линук.

Не си заредил драйвер за тунера. И не си се уверил дали е поддържан от tvtime или от mythtv
Активен

Господи моля те пази ме от ламерите, от хакерите и сам мога да се пазя.

ubunturoot

  • Напреднали
  • *****
  • Публикации: 165
    • Профил
Re: тvtime
« Отговор #2 -: Feb 17, 2012, 11:09 »
Здр реших да подкарам тв тунера Hauppauge wintv-hvr 930C ( usb,dvb-c,dvb-t ) под линукс и започнах да се ровя в интернет и открих че с тvtime може да се подкара и под ubuntu(в моя случай).Инсталирах си го следвайки в този сайт беше казано че да го сложа настройките на pal и после на europe. Добре като го стартирах няма сигнал тогава тръгнах да сканирам за канали но тази опция е не е достъпна затова реших да прегледам в интернет за настройване на програмата но пак нищо.Искам да питам някой има ли идея как да го настроя?Изришно съм проверил че този модел тунер върви под линук.

Не си заредил драйвер за тунера. И не си се уверил дали е поддържан от tvtime или от mythtv
драйверите ги сложих веднага,всепак ще проверя да ли всичко е ок.как да проверя дали го подържа?
Активен

rvelev

  • Напреднали
  • *****
  • Публикации: 12
    • Профил
Re: тvtime
« Отговор #3 -: Feb 17, 2012, 15:47 »
Здравей,
виж първо зареден ли е драйвера за твоя адаптер - lsusb
после с w-scan сканирай и ще намериш каналите.
Лично аз ползвам Kaffeine за гледане на dvb-c и работи перфектно за свободните канали включително и HD.
За кодираните канали ще ти бъде необходим CA модул и карта. Нашите кабелни оператори ползват система за криптиране conax.
Активен

ubunturoot

  • Напреднали
  • *****
  • Публикации: 165
    • Профил
Re: тvtime
« Отговор #4 -: Feb 17, 2012, 18:32 »
Здравей,
виж първо зареден ли е драйвера за твоя адаптер - lsusb
после с w-scan сканирай и ще намериш каналите.
Лично аз ползвам Kaffeine за гледане на dvb-c и работи перфектно за свободните канали включително и HD.
За кодираните канали ще ти бъде необходим CA модул и карта. Нашите кабелни оператори ползват система за криптиране conax.
как да проверя за драйвери на адаптера.Имам едни инсталирани за тунера за други нз.
Активен

rvelev

  • Напреднали
  • *****
  • Публикации: 12
    • Профил
Re: тvtime
« Отговор #5 -: Feb 17, 2012, 20:27 »
дай изхода на lsusb, а също така на lsmod|grep video и lsmod|grep dvb да видим какво имаш
В Kaffeine трябва да ти се появи Digital TV, ако всичко е нормално
но за да можеш да гледаш телевизия трябва да редактираш файла
 ~/.kde/share/apps/kaffeine/scanfile.dvb в който е нужно да се създаде секция за твоя кабелен оператор с честотите на които той работи.
Активен

ubunturoot

  • Напреднали
  • *****
  • Публикации: 165
    • Профил
Re: тvtime
« Отговор #6 -: Feb 17, 2012, 21:39 »
дай изхода на lsusb, а също така на lsmod|grep video и lsmod|grep dvb да видим какво имаш
В Kaffeine трябва да ти се появи Digital TV, ако всичко е нормално
но за да можеш да гледаш телевизия трябва да редактираш файла
 ~/.kde/share/apps/kaffeine/scanfile.dvb в който е нужно да се създаде секция за твоя кабелен оператор с честотите на които той работи.
само да upgrade pc
Активен

ubunturoot

  • Напреднали
  • *****
  • Публикации: 165
    • Профил
Re: тvtime
« Отговор #7 -: Feb 19, 2012, 00:05 »
Код:
uvcvideo               67271  0
videodev               85626  1 uvcvideo
video                  18908  0
от
Цитат
lsmod|grep dvb
нищо не излезе :(
Активен

rvelev

  • Напреднали
  • *****
  • Публикации: 12
    • Профил
Re: тvtime
« Отговор #8 -: Feb 19, 2012, 18:38 »
ме виждам въобще да ти е зареден модула
lsusb  какво ти показа
има ли някъде Hauppauge?

пробвай sudo modprobe em28xx
и след това дай изхода на dmesg -c
би трябвало да изглежда примерно така

dmesg output:
[ 1488.534203] usb 2-1.2.5: new high speed USB device number 9 using ehci_hcd
[ 1488.620375] usb 2-1.2.5: New USB device found, idVendor=2040, idProduct=1605
[ 1488.620378] usb 2-1.2.5: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 1488.620379] usb 2-1.2.5: Product: WinTV HVR-930C
[ 1488.620381] usb 2-1.2.5: SerialNumber: 4034722785
[ 1488.620625] em28xx: New device WinTV HVR-930C @ 480 Mbps (2040:1605, interface 0, class 0)
[ 1488.620626] em28xx: Audio Vendor Class interface 0 found
[ 1488.620628] em28xx: Video interface 0 found
[ 1488.620629] em28xx: DVB interface 0 found
[ 1488.620714] em28xx #0: chip ID is em2884
[ 1488.672755] em28xx #0: Identified as Hauppauge WinTV HVR 930C (card=81)
[ 1488.673117] Registered IR keymap rc-hauppauge
[ 1488.673186] input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.5/rc/rc2/input14
[ 1488.673251] rc2: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.5/rc/rc2
[ 1488.673864] em28xx #0: Config register raw data: 0x2a
[ 1488.673866] em28xx #0: I2S Audio (3 sample rates)
[ 1488.673867] em28xx #0: No AC97 audio processor
[ 1488.690631] em28xx #0: v4l2 driver version 0.1.3
[ 1488.712274] em28xx #0: V4L2 video device registered as video0
[ 1488.712278] em28xx-audio.c: probing for em28xx Audio Vendor Class
[ 1488.712279] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[ 1488.712280] em28xx-audio.c: Copyright (C) 2007-2011 Mauro Carvalho Chehab
[ 1489.863509] drxk: status = 0x439130d9
[ 1489.863512] drxk: detected a drx-3913k, spin A2, xtal 20.250 MHz
[ 1491.187257] DRXK driver version 0.9.4300
[ 1491.201708] drxk: frontend initialized.
[ 1491.201727] xc5000 1-0061: creating new instance
[ 1491.202205] xc5000: Successfully identified at address 0x61
[ 1491.202206] xc5000: Firmware has not been loaded previously
[ 1491.202209] DVB: registering new adapter (em28xx #0)
[ 1491.202211] DVB: registering adapter 1 frontend 0 (DRXK DVB-C DVB-T)...
[ 1491.202528] em28xx #0: Successfully loaded em28xx-dvb
« Последна редакция: Feb 19, 2012, 19:02 от rvelev »
Активен

ubunturoot

  • Напреднали
  • *****
  • Публикации: 165
    • Профил
Re: тvtime
« Отговор #9 -: Feb 19, 2012, 19:08 »
ме виждам въобще да ти е зареден модула
lsusb  какво ти показа
има ли някъде Hauppauge?

пробвай sudo modprobe em28xx
и след това дай изхода на dmesg -c
би трябвало да изглежда примерно така

dmesg output:
[ 1488.534203] usb 2-1.2.5: new high speed USB device number 9 using ehci_hcd
[ 1488.620375] usb 2-1.2.5: New USB device found, idVendor=2040, idProduct=1605
[ 1488.620378] usb 2-1.2.5: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 1488.620379] usb 2-1.2.5: Product: WinTV HVR-930C
[ 1488.620381] usb 2-1.2.5: SerialNumber: 4034722785
[ 1488.620625] em28xx: New device WinTV HVR-930C @ 480 Mbps (2040:1605, interface 0, class 0)
[ 1488.620626] em28xx: Audio Vendor Class interface 0 found
[ 1488.620628] em28xx: Video interface 0 found
[ 1488.620629] em28xx: DVB interface 0 found
[ 1488.620714] em28xx #0: chip ID is em2884
[ 1488.672755] em28xx #0: Identified as Hauppauge WinTV HVR 930C (card=81)
[ 1488.673117] Registered IR keymap rc-hauppauge
[ 1488.673186] input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.5/rc/rc2/input14
[ 1488.673251] rc2: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.5/rc/rc2
[ 1488.673864] em28xx #0: Config register raw data: 0x2a
[ 1488.673866] em28xx #0: I2S Audio (3 sample rates)
[ 1488.673867] em28xx #0: No AC97 audio processor
[ 1488.690631] em28xx #0: v4l2 driver version 0.1.3
[ 1488.712274] em28xx #0: V4L2 video device registered as video0
[ 1488.712278] em28xx-audio.c: probing for em28xx Audio Vendor Class
[ 1488.712279] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[ 1488.712280] em28xx-audio.c: Copyright (C) 2007-2011 Mauro Carvalho Chehab
[ 1489.863509] drxk: status = 0x439130d9
[ 1489.863512] drxk: detected a drx-3913k, spin A2, xtal 20.250 MHz
[ 1491.187257] DRXK driver version 0.9.4300
[ 1491.201708] drxk: frontend initialized.
[ 1491.201727] xc5000 1-0061: creating new instance
[ 1491.202205] xc5000: Successfully identified at address 0x61
[ 1491.202206] xc5000: Firmware has not been loaded previously
[ 1491.202209] DVB: registering new adapter (em28xx #0)
[ 1491.202211] DVB: registering adapter 1 frontend 0 (DRXK DVB-C DVB-T)...
[ 1491.202528] em28xx #0: Successfully loaded em28xx-dvb
Код:
smarfy02@smarfy02-Inspiron-1564:~$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
Bus 001 Device 004: ID 0c45:641d Microdia
Bus 001 Device 010: ID 413c:8160 Dell Computer Corp. Wireless 365 Bluetooth
Bus 002 Device 003: ID 2040:1605 Hauppauge
Bus 001 Device 006: ID 413c:8161 Dell Computer Corp. Integrated Keyboard
Bus 001 Device 007: ID 413c:8162 Dell Computer Corp. Integrated Touchpad [Synaptics]
Активен

ubunturoot

  • Напреднали
  • *****
  • Публикации: 165
    • Профил
Re: тvtime
« Отговор #10 -: Feb 19, 2012, 19:09 »
появи се някаква грешка
Код:
smarfy02@smarfy02-Inspiron-1564:~$ dmesg -c
klogctl: Действието не е позволено
Активен

rvelev

  • Напреднали
  • *****
  • Публикации: 12
    • Профил
Re: тvtime
« Отговор #11 -: Feb 19, 2012, 19:51 »
sudo dmesg -c

имаш го като хардуер '
Bus 002 Device 003: ID 2040:1605 Hauppauge
« Последна редакция: Feb 19, 2012, 19:56 от rvelev »
Активен

ubunturoot

  • Напреднали
  • *****
  • Публикации: 165
    • Профил
Re: тvtime
« Отговор #12 -: Feb 19, 2012, 20:21 »
това ми излезе
Код:
[10941.465719] cfg80211: Disabling freq 5640 MHz
[10941.465745] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule:
[10941.465752] cfg80211: 5650000 KHz - 5710000 KHz @  KHz), (300 mBi, 2000 mBm)
[10941.465759] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule:
[10941.465766] cfg80211: 5650000 KHz - 5710000 KHz @  KHz), (300 mBi, 2000 mBm)
[10941.465773] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule:
[10941.465782] cfg80211: 5650000 KHz - 5710000 KHz @  KHz), (300 mBi, 2000 mBm)
[10941.465789] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
[10941.465797] cfg80211: 5735000 KHz - 5835000 KHz @  KHz), (300 mBi, 3000 mBm)
[10941.465804] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
[10941.465812] cfg80211: 5735000 KHz - 5835000 KHz @  KHz), (300 mBi, 3000 mBm)
[10941.465819] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
[10941.465828] cfg80211: 5735000 KHz - 5835000 KHz @  KHz), (300 mBi, 3000 mBm)
[10941.465835] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
[10941.465844] cfg80211: 5735000 KHz - 5835000 KHz @  KHz), (300 mBi, 3000 mBm)
[10941.465851] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
[10941.465859] cfg80211: 5735000 KHz - 5835000 KHz @  KHz), (300 mBi, 3000 mBm)
[10941.465873] cfg80211: World regulatory domain updated:
[10941.465879] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[10941.465887] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[10941.465895] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[10941.465903] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[10941.465911] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[10941.465919] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[10942.932426] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[10942.950243] VFS: busy inodes on changed media or resized disk sr0
[10946.771174] PM: Syncing filesystems ... done.
[10946.783207] PM: Preparing system for mem sleep
[10946.783237] Freezing user space processes ... (elapsed 0.01 seconds) done.
[10946.799567] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[10946.815554] PM: Entering mem sleep
[10946.815623] Suspending console(s) (use no_console_suspend to debug)
[10946.816652] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[10946.828359] brcmsmac 0000:04:00.0: PCI INT A disabled
[10946.828439] [fglrx] IRQ 45 Disabled
[10946.828608] [fglrx] Preparing suspend fglrx in kernel.
[10946.863501] ehci_hcd 0000:00:1d.0: PCI INT A disabled
[10946.879514] ehci_hcd 0000:00:1a.0: PCI INT A disabled
[10946.931563] HDA Intel 0000:00:1b.0: PCI INT A disabled
[10946.935501] HDA Intel 0000:02:00.1: PCI INT B disabled
[10946.935533] ACPI handle has no context!
[10946.947472] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 118.959 msecs
[10946.951464] PM: suspend of drv:HDA Intel dev:0000:02:00.1 complete after 123.369 msecs
[10947.143265] sd 0:0:0:0: [sda] Stopping disk
[10947.329116] [fglrx] Suspending fglrx in kernel completed.
[10947.329118] [fglrx] Power down the ASIC .
[10947.329240] PM: suspend of drv:fglrx_pci dev:0000:02:00.0 complete after 501.087 msecs
[10947.329261] PM: suspend of drv:pcieport dev:0000:00:01.0 complete after 500.782 msecs
[10947.737345] PM: suspend of drv:sd dev:0:0:0:0 complete after 921.087 msecs
[10947.737368] PM: suspend of drv:scsi dev:target0:0:0 complete after 920.984 msecs
[10947.737403] PM: suspend of drv:scsi dev:host0 complete after 920.888 msecs
[10947.751164] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 923.125 msecs
[10947.751229] PM: suspend of drv: dev:pci0000:00 complete after 922.898 msecs
[10947.751248] PM: suspend of devices complete after 935.775 msecs
[10947.751253] PM: suspend devices took 0.936 seconds
[10947.751517] r8169 0000:05:00.0: PME# enabled
[10947.751530] r8169 0000:05:00.0: wake-up capability enabled by ACPI
[10947.815166] PM: late suspend of devices complete after 63.934 msecs
[10947.815507] ACPI: Preparing to enter system sleep state S3
[10947.827801] PM: Saving platform NVS memory
[10947.828678] Disabling non-boot CPUs ...
[10947.931088] CPU 1 is now offline
[10948.035039] CPU 2 is now offline
[10948.035910] Broke affinity for irq 1
[10948.138982] CPU 3 is now offline
[10948.139370] Extended CMOS year: 2000
[10948.139606] ACPI: Low-level resume complete
[10948.139662] PM: Restoring platform NVS memory
[10948.140094] CPU0: Thermal monitoring handled by SMI
[10948.140154] Extended CMOS year: 2000
[10948.140206] Enabling non-boot CPUs ...
[10948.140302] Booting Node 0 Processor 1 APIC 0x4
[10948.140304] smpboot cpu 1: start_ip = 98000
[10948.150508] Initializing CPU#1
[10948.227675] CPU1: Thermal monitoring handled by SMI
[10948.248272] CPU1 is up
[10948.248372] Booting Node 0 Processor 2 APIC 0x1
[10948.248374] smpboot cpu 2: start_ip = 98000
[10948.251650] Switched to NOHz mode on CPU #1
[10948.258427] Initializing CPU#2
[10948.335632] CPU2: Thermal monitoring handled by SMI
[10948.356378] CPU2 is up
[10948.356488] Booting Node 0 Processor 3 APIC 0x5
[10948.356490] smpboot cpu 3: start_ip = 98000
[10948.359607] Switched to NOHz mode on CPU #2
[10948.366642] Initializing CPU#3
[10948.443584] CPU3: Thermal monitoring handled by SMI
[10948.464482] CPU3 is up
[10948.467005] ACPI: Waking up from system sleep state S3
[10948.467612] Switched to NOHz mode on CPU #3
[10948.487806] pcieport 0000:00:01.0: restoring config space at offset 0xf (was 0x80100, writing 0x80105)
[10948.487813] pcieport 0000:00:01.0: restoring config space at offset 0x7 (was 0xf0, writing 0x2020)
[10948.487817] pcieport 0000:00:01.0: restoring config space at offset 0x6 (was 0x0, writing 0x20200)
[10948.487821] pcieport 0000:00:01.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010)
[10948.487825] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100507)
[10948.487872] mei 0000:00:16.0: restoring config space at offset 0x1 (was 0x180002, writing 0x180006)
[10948.487902] ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x105)
[10948.487921] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0306000)
[10948.487929] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102)
[10948.487965] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[10948.487984] HDA Intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0xdc000004, writing 0xf0300004)
[10948.487989] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[10948.487996] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100102)
[10948.488032] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x40107)
[10948.488044] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xc091c081)
[10948.488050] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xc070c060)
[10948.488055] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x5050)
[10948.488061] pcieport 0000:00:1c.0: restoring config space at offset 0x6 (was 0x0, writing 0x30300)
[10948.488069] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[10948.488076] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[10948.488117] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x40205)
[10948.488129] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xc051c041)
[10948.488135] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf020f020)
[10948.488140] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0x4040)
[10948.488146] pcieport 0000:00:1c.1: restoring config space at offset 0x6 (was 0x0, writing 0x40400)
[10948.488154] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[10948.488161] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[10948.488203] pcieport 0000:00:1c.5: restoring config space at offset 0xf (was 0x200, writing 0x40205)
[10948.488215] pcieport 0000:00:1c.5: restoring config space at offset 0x9 (was 0x10001, writing 0xf041f041)
[10948.488220] pcieport 0000:00:1c.5: restoring config space at offset 0x8 (was 0x0, writing 0xc030c000)
[10948.488226] pcieport 0000:00:1c.5: restoring config space at offset 0x7 (was 0x0, writing 0x3030)
[10948.488231] pcieport 0000:00:1c.5: restoring config space at offset 0x6 (was 0x0, writing 0x50500)
[10948.488240] pcieport 0000:00:1c.5: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[10948.488246] pcieport 0000:00:1c.5: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[10948.488284] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[10948.488303] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0306400)
[10948.488311] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102)
[10948.488337] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x40000, writing 0x400ff)
[10948.488349] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[10948.488355] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
[10948.488360] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
[10948.488372] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[10948.488436] ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a)
[10948.488460] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[10948.488536] fglrx_pci 0000:02:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x105)
[10948.488547] fglrx_pci 0000:02:00.0: restoring config space at offset 0x8 (was 0x1, writing 0x2001)
[10948.488553] fglrx_pci 0000:02:00.0: restoring config space at offset 0x6 (was 0x4, writing 0xcfee0004)
[10948.488559] fglrx_pci 0000:02:00.0: restoring config space at offset 0x4 (was 0xc, writing 0xd000000c)
[10948.488564] fglrx_pci 0000:02:00.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800010)
[10948.488571] fglrx_pci 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x40100503)
[10948.488614] HDA Intel 0000:02:00.1: restoring config space at offset 0xf (was 0x2ff, writing 0x207)
[10948.488629] HDA Intel 0000:02:00.1: restoring config space at offset 0x4 (was 0x4, writing 0xcfedc004)
[10948.488634] HDA Intel 0000:02:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x800010)
[10948.488640] HDA Intel 0000:02:00.1: restoring config space at offset 0x1 (was 0x100000, writing 0x40100103)
[10948.488725] brcmsmac 0000:04:00.0: restoring config space at offset 0xf (was 0x100, writing 0x107)
[10948.488764] brcmsmac 0000:04:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0200004)
[10948.488772] brcmsmac 0000:04:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[10948.488784] brcmsmac 0000:04:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100106)
[10948.488849] r8169 0000:05:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x107)
[10948.488863] r8169 0000:05:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xf040000c)
[10948.488870] r8169 0000:05:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xf041000c)
[10948.488877] r8169 0000:05:00.0: restoring config space at offset 0x4 (was 0x1, writing 0x3001)
[10948.488883] r8169 0000:05:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[10948.488891] r8169 0000:05:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100507)
[10948.489097] PM: early resume of devices complete after 1.358 msecs
[10948.489255] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[10948.489266] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[10948.489269] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[10948.489275] HDA Intel 0000:00:1b.0: setting latency timer to 64
[10948.489309] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[10948.489318] pci 0000:00:1e.0: setting latency timer to 64
[10948.489327] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[10948.489336] ahci 0000:00:1f.2: setting latency timer to 64
[10948.489391] HDA Intel 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[10948.489395] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[10948.489407] HDA Intel 0000:02:00.1: setting latency timer to 64
[10948.489441] brcmsmac 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[10948.489462] brcmsmac 0000:04:00.0: setting latency timer to 64
[10948.489491] r8169 0000:05:00.0: wake-up capability disabled by ACPI
[10948.489501] fglrx_pci 0000:02:00.0: setting latency timer to 64
[10948.489504] r8169 0000:05:00.0: PME# disabled
[10948.489536] HDA Intel 0000:02:00.1: irq 44 for MSI/MSI-X
[10948.489705] sd 0:0:0:0: [sda] Starting disk
[10948.494503] [fglrx] Power up the ASIC
[10948.494547] [fglrx] Preparing resume fglrx in kernel.
[10948.594574] Extended CMOS year: 2000
[10948.632813] [fglrx] Resuming fglrx in kernel completed.
[10948.633037] [fglrx] IRQ 45 Enabled
[10948.633050] PM: resume of drv:fglrx_pci dev:0000:02:00.0 complete after 143.779 msecs
[10948.667603] PM: resume of drv: dev:ep_00 complete after 177.987 msecs
[10948.667614] PM: resume of drv:hub dev:1-1:1.0 complete after 178.014 msecs
[10948.667625] PM: resume of drv: dev:ep_00 complete after 177.947 msecs
[10948.667635] PM: resume of drv:hub dev:2-1:1.0 complete after 177.973 msecs
[10948.667646] PM: resume of drv: dev:ep_81 complete after 178.025 msecs
[10948.667660] PM: resume of drv: dev:ep_81 complete after 178.001 msecs
[10948.739774] usb 2-1.1: reset high speed USB device number 3 using ehci_hcd
[10948.811516] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[10948.814949] ata2.00: configured for UDMA/100
[10948.833567] PM: resume of drv: dev:ep_00 complete after 343.213 msecs
[10948.833582] PM: resume of drv:usb dev:2-1.1:1.0 complete after 343.547 msecs
[10948.833616] PM: resume of drv: dev:ep_82 complete after 343.459 msecs
[10948.833624] PM: resume of drv: dev:ep_84 complete after 343.286 msecs
[10948.833634] PM: resume of drv: dev:ep_81 complete after 343.520 msecs
[10948.833647] PM: resume of drv: dev:ep_83 complete after 343.334 msecs
[10948.903550] usb 1-1.1: reset full speed USB device number 3 using ehci_hcd
[10949.070392] usb 1-1.4: reset high speed USB device number 4 using ehci_hcd
[10949.207374] PM: resume of drv:hub dev:1-1.1:1.0 complete after 717.919 msecs
[10949.207398] PM: resume of drv: dev:ep_00 complete after 717.882 msecs
[10949.207404] PM: resume of drv: dev:ep_81 complete after 717.914 msecs
[10949.208079] PM: resume of drv:usb dev:1-1.1.3:1.2 complete after 717.572 msecs
[10949.208088] PM: resume of drv:btusb dev:1-1.1.3:1.1 complete after 717.625 msecs
[10949.208094] PM: resume of drv:btusb dev:1-1.1.3:1.0 complete after 717.709 msecs
[10949.208104] PM: resume of drv:usb dev:1-1.1.3:1.3 complete after 717.538 msecs
[10949.208109] PM: resume of drv: dev:ep_04 complete after 717.566 msecs
[10949.208116] PM: resume of drv: dev:ep_83 complete after 717.645 msecs
[10949.208124] PM: resume of drv: dev:ep_81 complete after 717.718 msecs
[10949.208132] PM: resume of drv: dev:ep_00 complete after 717.544 msecs
[10949.208140] PM: resume of drv: dev:ep_03 complete after 717.639 msecs
[10949.208148] PM: resume of drv: dev:ep_02 complete after 717.694 msecs
[10949.208157] PM: resume of drv: dev:ep_84 complete after 717.620 msecs
[10949.208163] PM: resume of drv: dev:ep_82 complete after 717.727 msecs
[10949.224607] PM: resume of drv: dev:ep_00 complete after 734.965 msecs
[10949.224617] PM: resume of drv:uvcvideo dev:1-1.4:1.1 complete after 734.995 msecs
[10949.224624] PM: resume of drv:uvcvideo dev:1-1.4:1.0 complete after 735.048 msecs
[10949.224681] PM: resume of drv: dev:ep_83 complete after 735.086 msecs
[10949.279552] usb 1-1.1.2: reset full speed USB device number 7 using ehci_hcd
[10949.373964] PM: resume of drv: dev:ep_00 complete after 883.689 msecs
[10949.373979] PM: resume of drv:usb dev:1-1.1.2:1.0 complete after 883.743 msecs
[10949.374008] PM: resume of drv: dev:ep_81 complete after 883.751 msecs
[10949.443486] usb 1-1.1.1: reset full speed USB device number 6 using ehci_hcd
[10949.537220] PM: resume of drv: dev:ep_00 complete after 1047.090 msecs
[10949.537225] PM: resume of drv:usbhid dev:1-1.1.1:1.0 complete after 1047.132 msecs
[10949.537234] PM: resume of drv: dev:ep_81 complete after 1047.125 msecs
[10951.502363] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[10951.703369] ata1.00: configured for UDMA/133
[10951.725821] PM: resume of drv:sd dev:0:0:0:0 complete after 3237.483 msecs
[10951.725874] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 3094.047 msecs
[10951.725952] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 3237.612 msecs
[10951.755902] PM: resume of devices complete after 3268.101 msecs
[10951.755990] PM: resume devices took 3.268 seconds
[10951.756033] PM: Finishing wakeup.
[10951.756035] Restarting tasks ... done.
[10951.759455] video LNXVIDEO:00: Restoring backlight state
[10951.830275] usb 1-1.5: new high speed USB device number 9 using ehci_hcd
[10951.951684] scsi5 : usb-storage 1-1.5:1.0
[10951.952717] usb 1-1.1.3: USB disconnect, device number 8
[10952.203240] usb 1-1.5: USB disconnect, device number 9
[10952.534353] usb 1-1.1.3: new full speed USB device number 10 using ehci_hcd
[10953.695677] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[10953.753681] ieee80211 phy0: wl_ops_config: change monitor mode: false (implement)
[10953.753689] ieee80211 phy0: wl_ops_config: change power-save mode: false (implement)
[10953.757192] ieee80211 phy0: wl_ops_bss_info_changed: qos enabled: false (implement)
[10953.768493] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[10953.782491] r8169 0000:05:00.0: eth0: link down
[10953.782707] ADDRCONF(NETDEV_UP): eth0: link is not ready
[10960.600986] wlan0: authenticate with 64:68:0c:25:19:b8 (try 1)
[10960.603001] wlan0: authenticated
[10960.603268] wlan0: associate with 64:68:0c:25:19:b8 (try 1)
[10960.605780] wlan0: RX AssocResp from 64:68:0c:25:19:b8 (capab=0x411 status=0 aid=2)
[10960.605787] wlan0: associated
[10960.606949] ieee80211 phy0: wl_ops_bss_info_changed: qos enabled: false (implement)
[10960.606958] ieee80211 phy0: brcmsmac: wl_ops_bss_info_changed: associated
[10960.606980] ieee80211 phy0: wl_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[10960.607425] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[10960.705504] ieee80211 phy0: wl_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
[10971.162012] wlan0: no IPv6 routers present
[11303.380647] r8169 0000:05:00.0: eth0: link up
[11303.381169] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[11313.465359] eth0: no IPv6 routers present
[14770.943530] ieee80211 phy0: wl_ops_bss_info_changed: qos enabled: false (implement)
[14770.943540] ieee80211 phy0: brcmsmac: wl_ops_bss_info_changed: disassociated
[14770.943550] ieee80211 phy0: wl_ops_bss_info_changed: arp filtering: enabled false, count 1 (implement)
[14771.049263] cfg80211: All devices are disconnected, going to restore regulatory settings
[14771.049270] cfg80211: Restoring regulatory settings
[14771.049276] cfg80211: Calling CRDA to update world regulatory domain
[14771.377600] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[14771.377607] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
[14771.377611] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[14771.377615] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
[14771.377619] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[14771.377624] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
[14771.377627] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[14771.377632] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
[14771.377635] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[14771.377640] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
[14771.377643] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[14771.377648] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
[14771.377651] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[14771.377656] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
[14771.377659] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[14771.377664] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
[14771.377668] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[14771.377672] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
[14771.377676] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[14771.377680] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
[14771.377683] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[14771.377687] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
[14771.377691] cfg80211: Disabling freq 2467 MHz
[14771.377693] cfg80211: Disabling freq 2472 MHz
[14771.377696] cfg80211: Disabling freq 2484 MHz
[14771.377699] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule:
[14771.377704] cfg80211: 5170000 KHz - 5250000 KHz @  KHz), (300 mBi, 1700 mBm)
[14771.377707] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule:
[14771.377712] cfg80211: 5170000 KHz - 5250000 KHz @  KHz), (300 mBi, 1700 mBm)
[14771.377715] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule:
[14771.377720] cfg80211: 5170000 KHz - 5250000 KHz @  KHz), (300 mBi, 1700 mBm)
[14771.377724] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:
[14771.377728] cfg80211: 5170000 KHz - 5250000 KHz @  KHz), (300 mBi, 1700 mBm)
[14771.377732] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule:
[14771.377737] cfg80211: 5250000 KHz - 5330000 KHz @  KHz), (300 mBi, 2000 mBm)
[14771.377740] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule:
[14771.377745] cfg80211: 5250000 KHz - 5330000 KHz @  KHz), (300 mBi, 2000 mBm)
[14771.377748] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule:
[14771.377753] cfg80211: 5250000 KHz - 5330000 KHz @  KHz), (300 mBi, 2000 mBm)
[14771.377756] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule:
[14771.377761] cfg80211: 5250000 KHz - 5330000 KHz @  KHz), (300 mBi, 2000 mBm)
[14771.377764] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule:
[14771.377769] cfg80211: 5490000 KHz - 5600000 KHz @  KHz), (300 mBi, 2000 mBm)
[14771.377772] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule:
[14771.377776] cfg80211: 5490000 KHz - 5600000 KHz @  KHz), (300 mBi, 2000 mBm)
[14771.377780] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule:
[14771.377784] cfg80211: 5490000 KHz - 5600000 KHz @  KHz), (300 mBi, 2000 mBm)
[14771.377788] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule:
[14771.377792] cfg80211: 5490000 KHz - 5600000 KHz @  KHz), (300 mBi, 2000 mBm)
[14771.377796] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule:
[14771.377800] cfg80211: 5490000 KHz - 5600000 KHz @  KHz), (300 mBi, 2000 mBm)
[14771.377803] cfg80211: Disabling freq 5600 MHz
[14771.377806] cfg80211: Disabling freq 5620 MHz
[14771.377808] cfg80211: Disabling freq 5640 MHz
[14771.377811] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule:
[14771.377816] cfg80211: 5650000 KHz - 5710000 KHz @  KHz), (300 mBi, 2000 mBm)
[14771.377819] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule:
[14771.377824] cfg80211: 5650000 KHz - 5710000 KHz @  KHz), (300 mBi, 2000 mBm)
[14771.377827] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule:
[14771.377832] cfg80211: 5650000 KHz - 5710000 KHz @  KHz), (300 mBi, 2000 mBm)
[14771.377835] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
[14771.377840] cfg80211: 5735000 KHz - 5835000 KHz @  KHz), (300 mBi, 3000 mBm)
[14771.377843] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
[14771.377848] cfg80211: 5735000 KHz - 5835000 KHz @  KHz), (300 mBi, 3000 mBm)
[14771.377852] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
[14771.377856] cfg80211: 5735000 KHz - 5835000 KHz @  KHz), (300 mBi, 3000 mBm)
[14771.377860] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
[14771.377864] cfg80211: 5735000 KHz - 5835000 KHz @  KHz), (300 mBi, 3000 mBm)
[14771.377867] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
[14771.377872] cfg80211: 5735000 KHz - 5835000 KHz @  KHz), (300 mBi, 3000 mBm)
[14771.377879] cfg80211: World regulatory domain updated:
[14771.377882] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[14771.377887] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[14771.377891] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[14771.377895] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[14771.377899] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[14771.377903] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[14792.144490] wlan0: authenticate with 64:68:0c:25:19:b8 (try 1)
[14792.148068] wlan0: authenticated
[14792.148718] wlan0: associate with 64:68:0c:25:19:b8 (try 1)
[14792.155200] wlan0: RX ReassocResp from 64:68:0c:25:19:b8 (capab=0x411 status=0 aid=2)
[14792.155205] wlan0: associated
[14792.156165] ieee80211 phy0: wl_ops_bss_info_changed: qos enabled: false (implement)
[14792.156172] ieee80211 phy0: brcmsmac: wl_ops_bss_info_changed: associated
[14792.156194] ieee80211 phy0: wl_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[14797.169142] ieee80211 phy0: wl_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
[14802.439532] wlan0: no IPv6 routers present
[16527.249286] IR NEC protocol handler initialized
[16527.292764] usbcore: registered new interface driver em28xx
[16527.292768] em28xx driver loaded
[16527.294864] IR RC5(x) protocol handler initialized
[16527.296952] IR RC6 protocol handler initialized
[16527.298661] IR JVC protocol handler initialized
[16527.300308] IR Sony protocol handler initialized
[16527.328037] lirc_dev: IR Remote Control driver registered, major 248
[16527.328595] IR LIRC bridge handler initialized
и сега какво да правя ?
« Последна редакция: Feb 19, 2012, 20:57 от ubunturoot »
Активен

rvelev

  • Напреднали
  • *****
  • Публикации: 12
    • Профил
Re: тvtime
« Отговор #13 -: Feb 19, 2012, 21:15 »
sudo apt-get update
sudo apt-get install kaffeine

и трябва да имаш вече digital tv
писах ти ЛС
« Последна редакция: Feb 19, 2012, 21:20 от rvelev »
Активен

ubunturoot

  • Напреднали
  • *****
  • Публикации: 165
    • Профил
Re: тvtime
« Отговор #14 -: Feb 19, 2012, 21:17 »
sudo apt-get update
sudo apt-get install kaffeine

и трябва да имаш вече digital tv
аз kaffeine го имам ей сега ще видим
Активен