Автор Тема: Проблем с AMD процесор  (Прочетена 4224 пъти)

cybercop

  • Участник
  • *****
  • Публикации: 5561
  • Distribution: Ubuntu LTS, CENTOS 6.x
  • Window Manager: Xfce, Gnome 2
    • Профил
Re: Проблем с AMD процесор
« Отговор #30 -: Май 06, 2014, 14:15 »
Не съм сигурен, дали се добавя само за машини, на които е необходима или на всички, но не съм компетентен по темата и не ми се влиза в спорове. Просто давам алтернативни съвети на колегата, да пробва па може и да стане, има доста изписано в нета по този проблем:
Не пиша нищо, което не съм тествал. PAE поддръжката се инсталира автоматично още по време на инсталацията или след като актуализирам само на новият ми лаптоп. На старият лаптоп и на настолният компютър, където ядрата са по- стари си остава щатното, non-pae ядро.
Активен

Ползването на Linux води до пристрастяване. Факт.
http://s19.postimg.cc/4oajwoq5v/xenial2.png

Rosen88

  • Участник
  • *****
  • Публикации: 168
  • Distribution: Calculate Linux Desktop 15.17
  • Window Manager: Mate 1.15
    • Профил
Re: Проблем с AMD процесор
« Отговор #31 -: Май 06, 2014, 14:58 »
Не съм сигурен, дали се добавя само за машини, на които е необходима или на всички, но не съм компетентен по темата и не ми се влиза в спорове. Просто давам алтернативни съвети на колегата, да пробва па може и да стане, има доста изписано в нета по този проблем:
Не пиша нищо, което не съм тествал. PAE поддръжката се инсталира автоматично още по време на инсталацията или след като актуализирам само на новият ми лаптоп. На старият лаптоп и на настолният компютър, където ядрата са по- стари си остава щатното, non-pae ядро.

И все пак защо ти е шибан PAE който е яко ламав. Представи си както мен 8 ядра 8 ГБ рам и ще сложа ПАЕ само за да е 32 бита че видиш ли трябва се икономисва матрял. Пълни глупости.
Активен

Процесор: AMD Vishera FX8320 4600MHz Noctua NH-D14
Дънна Платка: Gigabyte GA-990-FXA UD3 Rev 4.0
Памет: 16GB DDR3 1600MHz Adata
SSD: AMD Radeon R7 SSD 120GB
HDD: Western Digital Red 1TB
Видео: Powercolor hd7870 ghz edition 2gb gddr5 (v2)
Захранване: Fractal Design Integra M650

cybercop

  • Участник
  • *****
  • Публикации: 5561
  • Distribution: Ubuntu LTS, CENTOS 6.x
  • Window Manager: Xfce, Gnome 2
    • Профил
Re: Проблем с AMD процесор
« Отговор #32 -: Май 06, 2014, 15:19 »
Отначало бяха трагедия, но сега, работят прилично. При мен, става въпрос за слаб, двуядрен процесор на 1.1 GHz и 4 GB RAM. При тези параметри на хардуера, не съм забелязал никаква разлика в работата между i686-pae и AMD64 ядрата. Сигурен съм, обаче, че при твоята мощна машина се забелязва разлика. Не съм сигурен, изобщо, че при над 4GB RAM, PAE ядрото ще се държи коректно. Ще ги разпознава, но не знам, доколко ефективно ще я използва. А, и не става въпрос само за RAM паметта.
« Последна редакция: Май 06, 2014, 15:24 от cybercop »
Активен

Ползването на Linux води до пристрастяване. Факт.
http://s19.postimg.cc/4oajwoq5v/xenial2.png

theshit

  • Гост
Re: Проблем с AMD процесор
« Отговор #33 -: Май 06, 2014, 15:34 »
И все пак защо ти е шибан PAE който е яко ламав. Представи си както мен 8 ядра 8 ГБ рам и ще сложа ПАЕ само за да е 32 бита че видиш ли трябва се икономисва матрял. Пълни глупости.

Идеята PAE като цяло е да съчетае хардуера, чрез софтуера така, че ресурсите да могат да бъдат използвани оптимално и пълноценно.

Или с други думи, да "отвори очите" на 32 битовите процесори за да засичат и използват до 64GB рам, както всеки един 64 битов под дефоулт.

Обаче, тук в случая имаме 64 битов AMD Sempron, на който не му е необходим PAE Kernel за да засича повечко рам (то не че и има де - 960MB както спомена човека в първия пост) и ме съмнява че е сложена версия е с ядро с PAE, която е необходима само за 32 битовите, и се създават проблеми и неправилно функциониране от страна на процесора а именно и затова може би е постоянно натоварен.

Като цяло PAE, би трябвало да го има само за 32-битовите дистрибуции, да пробва да инсталира Lubuntu x86_64. Соред мен, проблема идва от това, че е сложил 32 битова OS на 64 битов процесор. Нищо, че е Linux и тръгва на всичко, то пак ще тръгне, но дори и да тръгне, все ще има неприятни странични ефекти.

Или адски съм заблуден и брутално се бъркам, или съм по правия път!  :o
« Последна редакция: Май 06, 2014, 15:38 от theshit »
Активен

Rosen88

  • Участник
  • *****
  • Публикации: 168
  • Distribution: Calculate Linux Desktop 15.17
  • Window Manager: Mate 1.15
    • Профил
Re: Проблем с AMD процесор
« Отговор #34 -: Май 06, 2014, 15:54 »
Отначало бяха трагедия, но сега, работят прилично. При мен, става въпрос за слаб, двуядрен процесор на 1.1 GHz и 4 GB RAM. При тези параметри на хардуера, не съм забелязал никаква разлика в работата между i686-pae и AMD64 ядрата. Сигурен съм, обаче, че при твоята мощна машина се забелязва разлика. Не съм сигурен, изобщо, че при над 4GB RAM, PAE ядрото ще се държи коректно. Ще ги разпознава, но не знам, доколко ефективно ще я използва. А, и не става въпрос само за RAM паметта.

Те ПАЕ са си недомислица, само разпознава колкото да пише 8ГБ но реално ще ползва пак 3.4.
Активен

Процесор: AMD Vishera FX8320 4600MHz Noctua NH-D14
Дънна Платка: Gigabyte GA-990-FXA UD3 Rev 4.0
Памет: 16GB DDR3 1600MHz Adata
SSD: AMD Radeon R7 SSD 120GB
HDD: Western Digital Red 1TB
Видео: Powercolor hd7870 ghz edition 2gb gddr5 (v2)
Захранване: Fractal Design Integra M650

gat3way

  • Участник
  • *****
  • Публикации: 6050
  • Relentless troll
    • Профил
    • WWW
Re: Проблем с AMD процесор
« Отговор #35 -: Май 06, 2014, 16:25 »
Не, ще използва пак 8, въпросът е че го прави през един малък 128мб прозорец. Точно както навремето беше под ДОС с extended memory area-та и himem.sys, само дето там прозорецът беше само 64кб. Съвсем нормално с повече инсталирана памет, това да става неефективно заради непрестанното мапване и unmap-ване на памет. 8ГБ е някъде практичния максимум, след това почваш да го отнасяш и става все по-осезаемо колкото повече памет имаш инсталирана и утилизираш.
Активен

"Knowledge is power" - France is Bacon

Rosen88

  • Участник
  • *****
  • Публикации: 168
  • Distribution: Calculate Linux Desktop 15.17
  • Window Manager: Mate 1.15
    • Профил
Re: Проблем с AMD процесор
« Отговор #36 -: Май 06, 2014, 17:02 »
Не, ще използва пак 8, въпросът е че го прави през един малък 128мб прозорец. Точно както навремето беше под ДОС с extended memory area-та и himem.sys, само дето там прозорецът беше само 64кб. Съвсем нормално с повече инсталирана памет, това да става неефективно заради непрестанното мапване и unmap-ване на памет. 8ГБ е някъде практичния максимум, след това почваш да го отнасяш и става все по-осезаемо колкото повече памет имаш инсталирана и утилизираш.

От години съм на мнение че щом процесора ми е amd64 архитектура само 64 битова операционна система ще работи на него. И не съм изменял на този принцип от 2008ма.
Активен

Процесор: AMD Vishera FX8320 4600MHz Noctua NH-D14
Дънна Платка: Gigabyte GA-990-FXA UD3 Rev 4.0
Памет: 16GB DDR3 1600MHz Adata
SSD: AMD Radeon R7 SSD 120GB
HDD: Western Digital Red 1TB
Видео: Powercolor hd7870 ghz edition 2gb gddr5 (v2)
Захранване: Fractal Design Integra M650

gat3way

  • Участник
  • *****
  • Публикации: 6050
  • Relentless troll
    • Профил
    • WWW
Re: Проблем с AMD процесор
« Отговор #37 -: Май 06, 2014, 17:08 »
O, за това няма съмнение. Доста безсмислено начинание е да се търкаля 32-битова система на 64-битов процесор. Може би освен в случая с първите amd64 процесори и когато си доста лимитиран откъм физическа памет....но и за тогава не съм толкова убеден.
Активен

"Knowledge is power" - France is Bacon

Rosen88

  • Участник
  • *****
  • Публикации: 168
  • Distribution: Calculate Linux Desktop 15.17
  • Window Manager: Mate 1.15
    • Профил
Re: Проблем с AMD процесор
« Отговор #38 -: Май 06, 2014, 17:30 »
O, за това няма съмнение. Доста безсмислено начинание е да се търкаля 32-битова система на 64-битов процесор. Може би освен в случая с първите amd64 процесори и когато си доста лимитиран откъм физическа памет....но и за тогава не съм толкова убеден.

По онова време бях с 512МБ рам, но 64 битовите системи не бяха толкова взискателни като сега, и изобщо системите не бяха толкова взискателни паметта ми стигаше да търкаля тежкото КДЕ 3.5 и да се играят игри с Вайното.
Активен

Процесор: AMD Vishera FX8320 4600MHz Noctua NH-D14
Дънна Платка: Gigabyte GA-990-FXA UD3 Rev 4.0
Памет: 16GB DDR3 1600MHz Adata
SSD: AMD Radeon R7 SSD 120GB
HDD: Western Digital Red 1TB
Видео: Powercolor hd7870 ghz edition 2gb gddr5 (v2)
Захранване: Fractal Design Integra M650

warlord01

  • Гост
Re: Проблем с AMD процесор
« Отговор #39 -: Май 06, 2014, 17:34 »
Трябва ти поне двуядрен процесор с този който си каквато и дистрибуция да ползваш все ще ти товари.
Активен

theshit

  • Гост
Re: Проблем с AMD процесор
« Отговор #40 -: Май 06, 2014, 17:57 »
Трябва ти поне двуядрен процесор с този който си каквато и дистрибуция да ползваш все ще ти товари.
Сигурно имаш в предвид "която и да е дистрибуция с Х" или просто "която и да е дистрибуция" ?

Значи, момчета, когато хората казваха, че Линукс върви на стари машини, на които Уиндоус ще изпитва затруднения - не са визирали Х-а.

Според мен и до ден днешен един Linux с Х, все още има по-високи изисквания като параметри, за разлика от Windows XP, дори да не кажа, че и много повече.
Активен

leonkwolf

  • Участник
  • *****
  • Публикации: 94
  • Distribution: Lubuntu 14.04 LTS
    • Профил
Re: Проблем с AMD процесор
« Отговор #41 -: Май 06, 2014, 18:09 »
Ма и не е като да има проблем с някой хардуер дето дига много прекъсвания безпричинно. Странно. В dmesg има ли някакви странни неща?

Само флаша ли насича или като пуснеш някое видео, системата като цяло става unresponsive?
С флаш игри и видео и изобщо, когато стартирам 2 програми да работят по едно също време много се се забавя компютъра. Инсталираната от мен дистрибуция е 64-битова от нормален а не алтернативен Жив диск. Намерих още един проблем - не мога да сменям резолюцията на по-ниска от максималната 1366х768 защото изчезва абсолютно всичко от екрана(преди не ми се случвало)  Ето какво ми изведе терминала, когато въведох dmesg

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.13.0-24-generic (buildd@panlong) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #46-Ubuntu SMP Thu Apr 10 19:11:08 UTC 2014 (Ubuntu 3.13.0-24.46-generic 3.13.9)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic root=UUID=457bd723-a846-4c52-859c-c38b34def0ff ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003beeffff] usable
[    0.000000] BIOS-e820: [mem 0x000000003bef0000-0x000000003bef2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003bef3000-0x000000003befffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.3 present.
[    0.000000] DMI: MICRO-STAR INTERNATIONAL CO., LTD MS-7253/MS-7253, BIOS 6.00 PG 11/07/2006
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP bridge at 00:00:00
[    0.000000] Aperture from AGP @ d0000000 old size 32 MB
[    0.000000] Aperture from AGP @ d0000000 size 128 MB (APSIZE f20)
[    0.000000] e820: last_pfn = 0x3bef0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-CBFFF uncachable
[    0.000000]   CC000-D3FFF write-back
[    0.000000]   D4000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FFE0000000 write-back
[    0.000000]   1 base 0020000000 mask FFF0000000 write-back
[    0.000000]   2 base 0030000000 mask FFF8000000 write-back
[    0.000000]   3 base 0038000000 mask FFFC000000 write-back
[    0.000000]   4 base 003BF00000 mask FFFFF00000 uncachable
[    0.000000]   5 base 00D0000000 mask FFF8000000 write-combining
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [mem 0x000f3e60-0x000f3e6f] mapped at [ffff8800000f3e60]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01fdd000, 0x01fddfff] PGTABLE
[    0.000000] BRK [0x01fde000, 0x01fdefff] PGTABLE
[    0.000000] BRK [0x01fdf000, 0x01fdffff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x3bc00000-0x3bdfffff]
[    0.000000]  [mem 0x3bc00000-0x3bdfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x38000000-0x3bbfffff]
[    0.000000]  [mem 0x38000000-0x3bbfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x37ffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x37ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x3be00000-0x3beeffff]
[    0.000000]  [mem 0x3be00000-0x3beeffff] page 4k
[    0.000000] BRK [0x01fe0000, 0x01fe0fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35b9e000-0x36dc6fff]
[    0.000000] ACPI: RSDP 00000000000f7c80 000014 (v00 K8M890)
[    0.000000] ACPI: RSDT 000000003bef3040 000030 (v01 K8M890 AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: FACP 000000003bef30c0 000074 (v01 K8M890 AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: DSDT 000000003bef3180 0066AF (v01 K8M890 AWRDACPI 00001000 MSFT 0100000E)
[    0.000000] ACPI: FACS 000000003bef0000 000040
[    0.000000] ACPI: MCFG 000000003bef9940 00003C (v01 K8M890 AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: APIC 000000003bef9880 000074 (v01 K8M890 AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000003beeffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x3beeffff]
[    0.000000]   NODE_DATA [mem 0x3beeb000-0x3beeffff]
[    0.000000]  [ffffea0000000000-ffffea0000ffffff] PMD -> [ffff88003a600000-ffff88003b5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x3beeffff]
[    0.000000] On node 0 totalpages: 245390
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 3772 pages used for memmap
[    0.000000]   DMA32 zone: 241392 pages, LIFO batch:31
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
[    0.000000] IOAPIC[1]: apic_id 3, version 3, address 0xfecc0000, GSI 24-47
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
[    0.000000] nr_irqs_gsi: 64
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x3bf00000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88003bc00000 s86336 r8192 d24256 u1048576
[    0.000000] pcpu-alloc: s86336 r8192 d24256 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc:
  • 0 1
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 241533
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic root=UUID=457bd723-a846-4c52-859c-c38b34def0ff ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] AGP bridge at 00:00:00
[    0.000000] Aperture from AGP @ d0000000 old size 32 MB
[    0.000000] Aperture from AGP @ d0000000 size 128 MB (APSIZE f20)
[    0.000000] Node 0: aperture @ d0000000 size 128 MB
[    0.000000] Memory: 929724K/981560K available (7338K kernel code, 1138K rwdata, 3388K rodata, 1332K init, 1440K bss, 51836K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]    RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]    RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[    0.000000]    Offload RCU callbacks from all CPUs
[    0.000000]    Offload RCU callbacks from CPUs: 0-1.
[    0.000000] NR_IRQS:16640 nr_irqs:512 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 4194304 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1799.866 MHz processor
[    0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[    0.004008] Calibrating delay loop (skipped), value calculated using timer frequency.. 3599.73 BogoMIPS (lpj=7199464)
[    0.004013] pid_max: default: 32768 minimum: 301
[    0.004055] Security Framework initialized
[    0.004087] AppArmor: AppArmor initialized
[    0.004089] Yama: becoming mindful.
[    0.004320] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.005277] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.005738] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[    0.005744] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[    0.006113] Initializing cgroup subsys memory
[    0.006130] Initializing cgroup subsys devices
[    0.006134] Initializing cgroup subsys freezer
[    0.006137] Initializing cgroup subsys blkio
[    0.006140] Initializing cgroup subsys perf_event
[    0.006144] Initializing cgroup subsys hugetlb
[    0.006179] tseg: 003bf00000
[    0.006185] mce: CPU supports 5 MCE banks
[    0.006198] LVT offset 0 assigned for vector 0xf9
[    0.006203] process: using AMD E400 aware idle routine
[    0.006208] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.006208] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.006208] tlb_flushall_shift: 4
[    0.020101] ACPI: Core revision 20131115
[    0.024740] ACPI: All ACPI Tables successfully acquired
[    0.025519] ftrace: allocating 28408 entries in 111 pages
[    0.040701] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.082654] smpboot: CPU0: AMD Sempron(tm) Processor 3200+ (fam: 0f, model: 5f, stepping: 02)
[    0.084000] Performance Events: AMD PMU driver.
[    0.084000] ... version:                0
[    0.084000] ... bit width:              48
[    0.084000] ... generic registers:      4
[    0.084000] ... value mask:             0000ffffffffffff
[    0.084000] ... max period:             00007fffffffffff
[    0.084000] ... fixed-purpose events:   0
[    0.084000] ... event mask:             000000000000000f
[    0.086327] x86: Booted up 1 node, 1 CPUs
[    0.086334] smpboot: Total of 1 processors activated (3599.73 BogoMIPS)
[    0.086700] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.086892] devtmpfs: initialized
[    0.092252] EVM: security.selinux
[    0.092258] EVM: security.SMACK64
[    0.092260] EVM: security.ima
[    0.092261] EVM: security.capability
[    0.092387] PM: Registering ACPI NVS region [mem 0x3bef0000-0x3bef2fff] (12288 bytes)
[    0.094302] pinctrl core: initialized pinctrl subsystem
[    0.094433] regulator-dummy: no parameters
[    0.094486] RTC time: 17:38:50, date: 05/06/14
[    0.094555] NET: Registered protocol family 16
[    0.094774] cpuidle: using governor ladder
[    0.094778] cpuidle: using governor menu
[    0.094785] node 0 link 0: io port [a000, ffff]
[    0.094788] TOM: 0000000040000000 aka 1024M
[    0.094792] node 0 link 0: mmio [a0000, bffff]
[    0.094796] node 0 link 0: mmio [40000000, bfffffff]
[    0.094800] node 0 link 0: mmio [c0000000, cfffffff]
[    0.094802] node 0 link 0: mmio [d0000000, dcffffff]
[    0.094805] node 0 link 0: mmio [dd000000, ddffffff]
[    0.094808] node 0 link 0: mmio [de000000, dfffffff]
[    0.094810] node 0 link 0: mmio [e0000000, e05fffff]
[    0.094814] bus: [bus 00-05] on node 0 link 0
[    0.094817] bus: 00 [io  0x0000-0xffff]
[    0.094819] bus: 00 [mem 0x000a0000-0x000bffff]
[    0.094822] bus: 00 [mem 0x40000000-0xfcffffffff]
[    0.094885] ACPI: bus type PCI registered
[    0.094889] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.094996] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.095000] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.106480] PCI: Using configuration type 1 for base access
[    0.107957] bio: create slab <bio-0> at 0
[    0.108271] ACPI: Added _OSI(Module Device)
[    0.108276] ACPI: Added _OSI(Processor Device)
[    0.108279] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.108281] ACPI: Added _OSI(Processor Aggregator Device)
[    0.116291] ACPI: Interpreter enabled
[    0.116312] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[    0.116319] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131115/hwxface-580)
[    0.116333] ACPI: (supports S0 S1 S4 S5)
[    0.116335] ACPI: Using IOAPIC for interrupt routing
[    0.116388] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.116657] ACPI: No dock devices found.
[    0.125213] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.125226] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.125235] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.125739] PCI host bridge to bus 0000:00
[    0.125746] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.125750] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.125753] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.125757] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.125760] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[    0.125763] pci_bus 0000:00: root bus resource [mem 0x40000000-0xfebfffff]
[    0.125786] pci 0000:00:00.0: [1106:0336] type 00 class 0x060000
[    0.125801] pci 0000:00:00.0: reg 0x10: [mem 0xd0000000-0xd7ffffff pref]
[    0.126037] pci 0000:00:00.1: [1106:1336] type 00 class 0x060000
[    0.126213] pci 0000:00:00.2: [1106:2336] type 00 class 0x060000
[    0.126391] pci 0000:00:00.3: [1106:3336] type 00 class 0x060000
[    0.126569] pci 0000:00:00.4: [1106:4336] type 00 class 0x060000
[    0.126747] pci 0000:00:00.5: [1106:5336] type 00 class 0x080020
[    0.126958] pci 0000:00:00.7: [1106:7336] type 00 class 0x060000
[    0.127142] pci 0000:00:01.0: [1106:b188] type 01 class 0x060400
[    0.127330] pci 0000:00:02.0: [1106:a238] type 01 class 0x060400
[    0.127398] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.127521] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.127575] pci 0000:00:03.0: [1106:c238] type 01 class 0x060400
[    0.127657] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.127782] pci 0000:00:03.0: System wakeup disabled by ACPI
[    0.127846] pci 0000:00:0f.0: [1106:0591] type 00 class 0x01018f
[    0.127865] pci 0000:00:0f.0: reg 0x10: [io  0xff00-0xff07]
[    0.127876] pci 0000:00:0f.0: reg 0x14: [io  0xfe00-0xfe03]
[    0.127886] pci 0000:00:0f.0: reg 0x18: [io  0xfd00-0xfd07]
[    0.127896] pci 0000:00:0f.0: reg 0x1c: [io  0xfc00-0xfc03]
[    0.127907] pci 0000:00:0f.0: reg 0x20: [io  0xfb00-0xfb0f]
[    0.127917] pci 0000:00:0f.0: reg 0x24: [io  0xf400-0xf4ff]
[    0.128094] pci 0000:00:0f.0: System wakeup disabled by ACPI
[    0.128148] pci 0000:00:0f.1: [1106:0571] type 00 class 0x01018a
[    0.128194] pci 0000:00:0f.1: reg 0x20: [io  0xfa00-0xfa0f]
[    0.128392] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
[    0.128436] pci 0000:00:10.0: reg 0x20: [io  0xf900-0xf91f]
[    0.128477] pci 0000:00:10.0: supports D1 D2
[    0.128480] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.128590] pci 0000:00:10.0: System wakeup disabled by ACPI
[    0.128639] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300
[    0.128683] pci 0000:00:10.1: reg 0x20: [io  0xf800-0xf81f]
[    0.128724] pci 0000:00:10.1: supports D1 D2
[    0.128727] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.128836] pci 0000:00:10.1: System wakeup disabled by ACPI
[    0.128899] pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300
[    0.128943] pci 0000:00:10.2: reg 0x20: [io  0xf700-0xf71f]
[    0.128985] pci 0000:00:10.2: supports D1 D2
[    0.128987] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.129099] pci 0000:00:10.2: System wakeup disabled by ACPI
[    0.129152] pci 0000:00:10.3: [1106:3038] type 00 class 0x0c0300
[    0.129196] pci 0000:00:10.3: reg 0x20: [io  0xf600-0xf61f]
[    0.129236] pci 0000:00:10.3: supports D1 D2
[    0.129239] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.129349] pci 0000:00:10.3: System wakeup disabled by ACPI
[    0.129400] pci 0000:00:10.4: [1106:3104] type 00 class 0x0c0320
[    0.129418] pci 0000:00:10.4: reg 0x10: [mem 0xdffff000-0xdffff0ff]
[    0.129485] pci 0000:00:10.4: supports D1 D2
[    0.129488] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[    0.129598] pci 0000:00:10.4: System wakeup disabled by ACPI
[    0.129651] pci 0000:00:11.0: [1106:3337] type 00 class 0x060100
[    0.129885] pci 0000:00:11.7: [1106:287e] type 00 class 0x060000
[    0.130079] pci 0000:00:12.0: [1106:3065] type 00 class 0x020000
[    0.130096] pci 0000:00:12.0: reg 0x10: [io  0xf200-0xf2ff]
[    0.130107] pci 0000:00:12.0: reg 0x14: [mem 0xdfffe000-0xdfffe0ff]
[    0.130170] pci 0000:00:12.0: supports D1 D2
[    0.130173] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.130285] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.130335] pci 0000:00:13.0: [1106:337b] type 01 class 0x060400
[    0.130542] pci 0000:00:13.1: [1106:337a] type 01 class 0x060401
[    0.130709] pci 0000:00:13.1: System wakeup disabled by ACPI
[    0.130766] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[    0.130920] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[    0.131065] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[    0.131211] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[    0.131421] pci 0000:01:00.0: [1106:3230] type 00 class 0x030000
[    0.131440] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
[    0.131449] pci 0000:01:00.0: reg 0x14: [mem 0xdd000000-0xddffffff]
[    0.131481] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.131511] pci 0000:01:00.0: supports D1 D2
[    0.131580] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.131585] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.131590] pci 0000:00:01.0:   bridge window [mem 0xdd000000-0xdeffffff]
[    0.131595] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff pref]
[    0.131774] pci 0000:00:02.0: PCI bridge to [bus 02]
[    0.131779] pci 0000:00:02.0:   bridge window [io  0xd000-0xdfff]
[    0.131784] pci 0000:00:02.0:   bridge window [mem 0xdfc00000-0xdfcfffff]
[    0.131790] pci 0000:00:02.0:   bridge window [mem 0xdfb00000-0xdfbfffff 64bit pref]
[    0.131971] pci 0000:00:03.0: PCI bridge to [bus 03]
[    0.131976] pci 0000:00:03.0:   bridge window [io  0xc000-0xcfff]
[    0.131981] pci 0000:00:03.0:   bridge window [mem 0xdfe00000-0xdfefffff]
[    0.132013] pci 0000:00:03.0:   bridge window [mem 0xdfd00000-0xdfdfffff 64bit pref]
[    0.132119] pci 0000:04:01.0: [1106:3288] type 00 class 0x040300
[    0.132138] pci 0000:04:01.0: reg 0x10: [mem 0xdfafc000-0xdfafffff 64bit]
[    0.132205] pci 0000:04:01.0: PME# supported from D0 D3hot D3cold
[    0.132238] pci 0000:04:01.0: System wakeup disabled by ACPI
[    0.132283] pci 0000:04:01.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.132319] pci 0000:00:13.0: PCI bridge to [bus 04]
[    0.132324] pci 0000:00:13.0:   bridge window [io  0xb000-0xbfff]
[    0.132329] pci 0000:00:13.0:   bridge window [mem 0xdfa00000-0xdfafffff]
[    0.132335] pci 0000:00:13.0:   bridge window [mem 0xdf900000-0xdf9fffff 64bit pref]
[    0.132419] pci 0000:00:13.1: PCI bridge to [bus 05] (subtractive decode)
[    0.132424] pci 0000:00:13.1:   bridge window [io  0xa000-0xafff]
[    0.132429] pci 0000:00:13.1:   bridge window [mem 0xdf800000-0xdf8fffff]
[    0.132435] pci 0000:00:13.1:   bridge window [mem 0xdf700000-0xdf7fffff 64bit pref]
[    0.132439] pci 0000:00:13.1:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.132442] pci 0000:00:13.1:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.132445] pci 0000:00:13.1:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.132448] pci 0000:00:13.1:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    0.132452] pci 0000:00:13.1:   bridge window [mem 0x40000000-0xfebfffff] (subtractive decode)
[    0.133413] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
[    0.133549] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
[    0.133684] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12)
[    0.133819] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 *10 11 12)
[    0.133921] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[    0.134020] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[    0.134117] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[    0.134229] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *5
[    0.134922] ACPI: Enabled 1 GPEs in block 10 to 1F
[    0.134934] ACPI: \_SB_.PCI0: notify handler is installed
[    0.135024] Found 1 acpi root devices
[    0.135256] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.135261] vgaarb: loaded
[    0.135263] vgaarb: bridge control possible 0000:01:00.0
[    0.135579] SCSI subsystem initialized
[    0.135690] libata version 3.00 loaded.
[    0.135731] ACPI: bus type USB registered
[    0.135769] usbcore: registered new interface driver usbfs
[    0.135783] usbcore: registered new interface driver hub
[    0.135826] usbcore: registered new device driver usb
[    0.136042] PCI: Using ACPI for IRQ routing
[    0.144094] PCI: pci_cache_line_size set to 64 bytes
[    0.144113] pci 0000:00:00.0: address space collision: [mem 0xd0000000-0xd7ffffff pref] conflicts with GART [mem 0xd0000000-0xd7ffffff]
[    0.144187] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    0.144191] e820: reserve RAM buffer [mem 0x3bef0000-0x3bffffff]
[    0.144383] NetLabel: Initializing
[    0.144387] NetLabel:  domain hash size = 128
[    0.144388] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.144411] NetLabel:  unlabeled traffic allowed by default
[    0.144616] Switched to clocksource refined-jiffies
[    0.154903] AppArmor: AppArmor Filesystem Enabled
[    0.154956] pnp: PnP ACPI init
[    0.154983] ACPI: bus type PNP registered
[    0.155170] system 00:00: [io  0x0400-0x047f] has been reserved
[    0.155177] system 00:00: [io  0x0500-0x050f] has been reserved
[    0.155183] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.155837] system 00:01: [mem 0xf0000000-0xf0000fff] has been reserved
[    0.155845] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.156253] system 00:02: [io  0x04d0-0x04d1] has been reserved
[    0.156259] system 00:02: [io  0x0290-0x0297] has been reserved
[    0.156265] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.156284] pnp 00:03: [dma 4]
[    0.156320] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.156377] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.156421] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.156469] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.156639] pnp 00:07: [dma 2]
[    0.156696] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.156976] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.157268] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.157699] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.157867] pnp 00:0b: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.157947] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.158087] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
[    0.158094] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.158347] pnp 00:0e: disabling [mem 0x000cc000-0x000cffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref]
[    0.158352] pnp 00:0e: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref]
[    0.158356] pnp 00:0e: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref]
[    0.158360] pnp 00:0e: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref]
[    0.158364] pnp 00:0e: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref]
[    0.158368] pnp 00:0e: disabling [mem 0x00100000-0x3beeffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref]
[    0.158461] system 00:0e: [mem 0x3bf00000-0x3bffffff] could not be reserved
[    0.158466] system 00:0e: [mem 0x3bef0000-0x3befffff] could not be reserved
[    0.158470] system 00:0e: [mem 0xffff0000-0xffffffff] has been reserved
[    0.158474] system 00:0e: [mem 0x3c000000-0x3fffffff] has been reserved
[    0.158478] system 00:0e: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.158482] system 00:0e: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.158486] system 00:0e: [mem 0xfff80000-0xfffeffff] has been reserved
[    0.158491] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.158526] pnp: PnP ACPI: found 15 devices
[    0.158528] ACPI: bus type PNP unregistered
[    0.165285] Switched to clocksource acpi_pm
[    0.165356] pci 0000:01:00.0: BAR 6: assigned [mem 0xde000000-0xde00ffff pref]
[    0.165361] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.165365] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.165371] pci 0000:00:01.0:   bridge window [mem 0xdd000000-0xdeffffff]
[    0.165376] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff pref]
[    0.165382] pci 0000:00:02.0: PCI bridge to [bus 02]
[    0.165386] pci 0000:00:02.0:   bridge window [io  0xd000-0xdfff]
[    0.165392] pci 0000:00:02.0:   bridge window [mem 0xdfc00000-0xdfcfffff]
[    0.165397] pci 0000:00:02.0:   bridge window [mem 0xdfb00000-0xdfbfffff 64bit pref]
[    0.165403] pci 0000:00:03.0: PCI bridge to [bus 03]
[    0.165407] pci 0000:00:03.0:   bridge window [io  0xc000-0xcfff]
[    0.165413] pci 0000:00:03.0:   bridge window [mem 0xdfe00000-0xdfefffff]
[    0.165418] pci 0000:00:03.0:   bridge window [mem 0xdfd00000-0xdfdfffff 64bit pref]
[    0.165426] pci 0000:00:13.0: PCI bridge to [bus 04]
[    0.165430] pci 0000:00:13.0:   bridge window [io  0xb000-0xbfff]
[    0.165435] pci 0000:00:13.0:   bridge window [mem 0xdfa00000-0xdfafffff]
[    0.165440] pci 0000:00:13.0:   bridge window [mem 0xdf900000-0xdf9fffff 64bit pref]
[    0.165446] pci 0000:00:13.1: PCI bridge to [bus 05]
[    0.165450] pci 0000:00:13.1:   bridge window [io  0xa000-0xafff]
[    0.165455] pci 0000:00:13.1:   bridge window [mem 0xdf800000-0xdf8fffff]
[    0.165460] pci 0000:00:13.1:   bridge window [mem 0xdf700000-0xdf7fffff 64bit pref]
[    0.165468] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.165471] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.165474] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.165477] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[    0.165480] pci_bus 0000:00: resource 8 [mem 0x40000000-0xfebfffff]
[    0.165483] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.165486] pci_bus 0000:01: resource 1 [mem 0xdd000000-0xdeffffff]
[    0.165489] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff pref]
[    0.165493] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.165496] pci_bus 0000:02: resource 1 [mem 0xdfc00000-0xdfcfffff]
[    0.165499] pci_bus 0000:02: resource 2 [mem 0xdfb00000-0xdfbfffff 64bit pref]
[    0.165503] pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
[    0.165506] pci_bus 0000:03: resource 1 [mem 0xdfe00000-0xdfefffff]
[    0.165509] pci_bus 0000:03: resource 2 [mem 0xdfd00000-0xdfdfffff 64bit pref]
[    0.165512] pci_bus 0000:04: resource 0 [io  0xb000-0xbfff]
[    0.165515] pci_bus 0000:04: resource 1 [mem 0xdfa00000-0xdfafffff]
[    0.165519] pci_bus 0000:04: resource 2 [mem 0xdf900000-0xdf9fffff 64bit pref]
[    0.165522] pci_bus 0000:05: resource 0 [io  0xa000-0xafff]
[    0.165525] pci_bus 0000:05: resource 1 [mem 0xdf800000-0xdf8fffff]
[    0.165528] pci_bus 0000:05: resource 2 [mem 0xdf700000-0xdf7fffff 64bit pref]
[    0.165531] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    0.165534] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[    0.165537] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    0.165540] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
[    0.165543] pci_bus 0000:05: resource 8 [mem 0x40000000-0xfebfffff]
[    0.165607] NET: Registered protocol family 2
[    0.165911] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.165974] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[    0.166059] TCP: Hash tables configured (established 8192 bind 8192)
[    0.166169] TCP: reno registered
[    0.166178] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.166196] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.166331] NET: Registered protocol family 1
[    0.166351] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[    0.166377] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[    0.166383] pci 0000:00:02.0: MSI quirk detected; subordinate MSI disabled
[    0.167483] pci 0000:01:00.0: Boot video device
[    0.167492] PCI: CLS 32 bytes, default 64
[    0.167627] Trying to unpack rootfs image as initramfs...
[    0.692049] Freeing initrd memory: 18596K (ffff880035b9e000 - ffff880036dc7000)
[    0.692178] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0336]
[    0.697038] agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
[    0.697218] microcode: AMD CPU family 0xf not supported
[    0.697221] Scanning for low memory corruption every 60 seconds
[    0.697585] Initialise system trusted keyring
[    0.697674] audit: initializing netlink socket (disabled)
[    0.697694] type=2000 audit(1399397930.695:1): initialized
[    0.736727] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.738918] VFS: Disk quotas dquot_6.5.2
[    0.739006] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.739870] fuse init (API version 7.22)
[    0.740033] msgmni has been set to 1852
[    0.740142] Key type big_key registered
[    0.740614] Key type asymmetric registered
[    0.740620] Asymmetric key parser 'x509' registered
[    0.740711] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.740781] io scheduler noop registered
[    0.740784] io scheduler deadline registered (default)
[    0.740832] io scheduler cfq registered
[    0.741460] ioapic: probe of 0000:00:00.5 failed with error -22
[    0.741475] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.741497] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.741567] vesafb: mode is 1280x768x32, linelength=5120, pages=0
[    0.741569] vesafb: scrolling: redraw
[    0.741572] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    0.741786] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010280000, using 3840k, total 3840k
[    0.902517] Console: switching to colour frame buffer device 160x48
[    1.063049] fb0: VESA VGA frame buffer device
[    1.063197] ipmi message handler version 39.2
[    1.063301] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    1.063308] ACPI: Power Button [PWRB]
[    1.063388] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.063392] ACPI: Power Button [PWRF]
[    1.063519] GHES: HEST is not enabled!
[    1.063696] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.084141] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.104672] 00:09: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.106369] Linux agpgart interface v0.103
[    1.108413] brd: module loaded
[    1.109518] loop: module loaded
[    1.110186] libphy: Fixed MDIO Bus: probed
[    1.110339] tun: Universal TUN/TAP device driver, 1.6
[    1.110342] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.110441] PPP generic driver version 2.4.2
[    1.110516] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.110524] ehci-pci: EHCI PCI platform driver
[    1.110770] ehci-pci 0000:00:10.4: EHCI Host Controller
[    1.110786] ehci-pci 0000:00:10.4: new USB bus registered, assigned bus number 1
[    1.110860] ehci-pci 0000:00:10.4: irq 21, io mem 0xdffff000
[    1.120016] ehci-pci 0000:00:10.4: USB 2.0 started, EHCI 1.00
[    1.120134] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.120138] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.120141] usb usb1: Product: EHCI Host Controller
[    1.120144] usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
[    1.120146] usb usb1: SerialNumber: 0000:00:10.4
[    1.120338] hub 1-0:1.0: USB hub found
[    1.120353] hub 1-0:1.0: 8 ports detected
[    1.120602] ehci-platform: EHCI generic platform driver
[    1.120620] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.120622] ohci-pci: OHCI PCI platform driver
[    1.120641] ohci-platform: OHCI generic platform driver
[    1.120651] uhci_hcd: USB Universal Host Controller Interface driver
[    1.120851] uhci_hcd 0000:00:10.0: UHCI Host Controller
[    1.120863] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[    1.120923] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000f900
[    1.121037] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.121040] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.121043] usb usb2: Product: UHCI Host Controller
[    1.121046] usb usb2: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
[    1.121049] usb usb2: SerialNumber: 0000:00:10.0
[    1.121245] hub 2-0:1.0: USB hub found
[    1.121264] hub 2-0:1.0: 2 ports detected
[    1.121567] uhci_hcd 0000:00:10.1: UHCI Host Controller
[    1.121580] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[    1.121632] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000f800
[    1.121740] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.121743] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.121746] usb usb3: Product: UHCI Host Controller
[    1.121749] usb usb3: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
[    1.121752] usb usb3: SerialNumber: 0000:00:10.1
[    1.121954] hub 3-0:1.0: USB hub found
[    1.121969] hub 3-0:1.0: 2 ports detected
[    1.122297] uhci_hcd 0000:00:10.2: UHCI Host Controller
[    1.122311] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[    1.122344] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000f700
[    1.122452] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.122455] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.122458] usb usb4: Product: UHCI Host Controller
[    1.122461] usb usb4: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
[    1.122464] usb usb4: SerialNumber: 0000:00:10.2
[    1.122656] hub 4-0:1.0: USB hub found
[    1.122671] hub 4-0:1.0: 2 ports detected
[    1.122967] uhci_hcd 0000:00:10.3: UHCI Host Controller
[    1.122981] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[    1.123032] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000f600
[    1.123144] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.123147] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.123150] usb usb5: Product: UHCI Host Controller
[    1.123153] usb usb5: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
[    1.123156] usb usb5: SerialNumber: 0000:00:10.3
[    1.123341] hub 5-0:1.0: USB hub found
[    1.123355] hub 5-0:1.0: 2 ports detected
[    1.123597] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.124107] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.124118] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.124321] mousedev: PS/2 mouse device common for all mice
[    1.124517] rtc_cmos 00:04: RTC can wake from S4
[    1.124743] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    1.124787] rtc_cmos 00:04: alarms up to one year, y3k, 242 bytes nvram
[    1.124897] device-mapper: uevent: version 1.0.3
[    1.125014] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.125024] ledtrig-cpu: registered to indicate activity on CPUs
[    1.125186] TCP: cubic registered
[    1.125334] NET: Registered protocol family 10
[    1.125635] NET: Registered protocol family 17
[    1.125657] Key type dns_resolver registered
[    1.126002] Loading compiled-in X.509 certificates
[    1.127555] Loaded X.509 cert 'Magrathea: Glacier signing key: 00a5a65759de474bc5c43120880c1b94a539f431'
[    1.127578] registered taskstats version 1
[    1.132327] Key type trusted registered
[    1.136731] Key type encrypted registered
[    1.141247] AppArmor: AppArmor sha1 policy hashing enabled
[    1.141254] IMA: No TPM chip found, activating TPM-bypass!
[    1.141629] regulator-dummy: disabling
[    1.141759]   Magic number: 14:826:642
[    1.141918] rtc_cmos 00:04: setting system clock to 2014-05-06 17:38:51 UTC (1399397931)
[    1.149541] [Firmware Bug]: powernow-k8: No PSB or ACPI _PSS objects
[    1.149547] powernow-k8: Make sure that your BIOS is up to date and Cool'N'Quiet support is enabled in BIOS setup
[    1.149671] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.149674] EDD information not available.
[    1.149724] PM: Hibernation image not present or could not be loaded.
[    1.152692] Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)
[    1.152699] Write protecting the kernel read-only data: 12288k
[    1.153039] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    1.157188] Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000)
[    1.160777] Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000)
[    1.196456] systemd-udevd[91]: starting version 204
[    1.279660] Floppy drive(s): fd0 is 1.44M
[    1.296043] FDC 0 is a post-1991 82077
[    1.304206] sata_via 0000:00:0f.0: version 2.6
[    1.304415] sata_via 0000:00:0f.0: routed to hard irq line 11
[    1.310070] scsi0 : sata_via
[    1.314124] scsi1 : sata_via
[    1.314227] ata1: SATA max UDMA/133 cmd 0xff00 ctl 0xfe00 bmdma 0xfb00 irq 21
[    1.314232] ata2: SATA max UDMA/133 cmd 0xfd00 ctl 0xfc00 bmdma 0xfb08 irq 21
[    1.314361] pata_via 0000:00:0f.1: version 0.3.4
[    1.318201] scsi2 : pata_via
[    1.320173] scsi3 : pata_via
[    1.320289] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[    1.320292] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[    1.331984] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
[    1.331991] via_rhine: Broken BIOS detected, avoid_D3 enabled
[    1.337943] via-rhine 0000:00:12.0 eth0: VIA Rhine II at 0xdfffe000, 00:16:17:e4:9f:e9, IRQ 23
[    1.338744] via-rhine 0000:00:12.0 eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 4de1
[    1.484423] ata3.00: ATAPI: HL-DT-ST DVDRAM GSA-H42L, SL00, max UDMA/66
[    1.500247] ata3.00: configured for UDMA/66
[    1.516021] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.616029] usb 5-1: new low-speed USB device number 2 using uhci_hcd
[    1.716655] ata1.00: ATA-7: ST380815AS, 3.AAD, max UDMA/133
[    1.716660] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.783088] usb 5-1: New USB device found, idVendor=04f3, idProduct=0210
[    1.783093] usb 5-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    1.783096] usb 5-1: Product: PS/2+USB Mouse
[    1.783304] ata1.00: configured for UDMA/133
[    1.783481] scsi 0:0:0:0: Direct-Access     ATA      ST380815AS       3.AA PQ: 0 ANSI: 5
[    1.783862] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    1.783938] sd 0:0:0:0: [sda] Write Protect is off
[    1.783942] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.783973] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.784202] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.792707] hidraw: raw HID events driver (C) Jiri Kosina
[    1.810003] usbcore: registered new interface driver usbhid
[    1.810010] usbhid: USB HID core driver
[    1.814447] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:10.3/usb5/5-1/5-1:1.0/input/input4
[    1.816937] hid-generic 0003:04F3:0210.0001: input,hidraw0: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:10.3-1/input0
[    1.844497]  sda: sda1 sda2 < sda5 sda6 >
[    1.845087] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.988028] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[    2.002101] scsi 2:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-H42L  SL00 PQ: 0 ANSI: 5
[    2.007797] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.007804] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.008590] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.008987] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    2.779889] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    3.382276] random: init urandom read with 114 bits of entropy available
[    3.920420] random: nonblocking pool is initialized
[    3.980147] init: plymouth-upstart-bridge main process (151) terminated with status 1
[    3.980179] init: plymouth-upstart-bridge main process ended, respawning
[    3.990279] init: plymouth-upstart-bridge main process (162) terminated with status 1
[    3.990308] init: plymouth-upstart-bridge main process ended, respawning
[    4.000175] init: plymouth-upstart-bridge main process (164) terminated with status 1
[    4.000205] init: plymouth-upstart-bridge main process ended, respawning
[    4.010584] init: plymouth-upstart-bridge main process (166) terminated with status 1
[    4.010611] init: plymouth-upstart-bridge main process ended, respawning
[    4.024723] init: plymouth-upstart-bridge main process (169) terminated with status 1
[    4.024751] init: plymouth-upstart-bridge main process ended, respawning
[    4.034713] init: plymouth-upstart-bridge main process (172) terminated with status 1
[    4.034742] init: plymouth-upstart-bridge main process ended, respawning
[    4.044789] init: plymouth-upstart-bridge main process (174) terminated with status 1
[    4.044817] init: plymouth-upstart-bridge main process ended, respawning
[    4.054099] init: plymouth-upstart-bridge main process (176) terminated with status 1
[    4.054128] init: plymouth-upstart-bridge main process ended, respawning
[    4.064358] init: plymouth-upstart-bridge main process (178) terminated with status 1
[    4.064388] init: plymouth-upstart-bridge main process ended, respawning
[    4.073677] init: plymouth-upstart-bridge main process (180) terminated with status 1
[    4.073706] init: plymouth-upstart-bridge main process ended, respawning
[    4.083066] init: plymouth-upstart-bridge main process (182) terminated with status 1
[    4.083095] init: plymouth-upstart-bridge respawning too fast, stopped
[   11.525134] Adding 7425020k swap on /dev/sda5.  Priority:-1 extents:1 across:7425020k FS
[   11.631675] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.837036] systemd-udevd[285]: starting version 204
[   12.080315] lp: driver loaded but no devices found
[   12.114275] ppdev: user-space parallel port driver
[   12.121370] parport_pc 00:0a: reported by Plug and Play ACPI
[   12.121429] parport0: PC-style at 0x378, irq 7 [PCSPP]
[   12.216653] lp0: using parport0 (interrupt-driven).
[   12.311650] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[   12.459361] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   12.824603] MCE: In-kernel MCE decoding enabled.
[   12.845149] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[   12.869214] EDAC MC: Ver: 3.0.0
[   12.913934] type=1400 audit(1399387143.266:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=357 comm="apparmor_parser"
[   12.913948] type=1400 audit(1399387143.266:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=357 comm="apparmor_parser"
[   12.913954] type=1400 audit(1399387143.266:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=357 comm="apparmor_parser"
[   12.914743] type=1400 audit(1399387143.266:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=357 comm="apparmor_parser"
[   12.914754] type=1400 audit(1399387143.266:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=357 comm="apparmor_parser"
[   12.915152] type=1400 audit(1399387143.266:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=357 comm="apparmor_parser"
[   12.925444] AMD64 EDAC driver v3.4.0
[   12.925520] EDAC amd64: DRAM ECC disabled.
[   12.925525] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[   12.925525]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[   12.925525]  (Note that use of the override may cause unknown side effects.)
[   12.934315] type=1400 audit(1399387143.286:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=365 comm="apparmor_parser"
[   13.370276] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[   13.935783] Bluetooth: Core ver 2.17
[   13.937847] NET: Registered protocol family 31
[   13.937850] Bluetooth: HCI device and connection manager initialized
[   13.937864] Bluetooth: HCI socket layer initialized
[   13.937867] Bluetooth: L2CAP socket layer initialized
[   13.937883] Bluetooth: SCO socket layer initialized
[   13.965301] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   13.965302] Bluetooth: BNEP filters: protocol multicast
[   13.965317] Bluetooth: BNEP socket layer initialized
[   14.161753] type=1400 audit(1399387144.514:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=464 comm="apparmor_parser"
[   14.161770] type=1400 audit(1399387144.514:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=464 comm="apparmor_parser"
[   14.162564] type=1400 audit(1399387144.514:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=464 comm="apparmor_parser"
[   14.176488] Bluetooth: RFCOMM TTY layer initialized
[   14.176511] Bluetooth: RFCOMM socket layer initialized
[   14.176527] Bluetooth: RFCOMM ver 1.11
[   14.410043] init: Failed to spawn smbd main process: unable to execute: No such file or directory
[   14.424259] init: Failed to spawn samba-ad-dc main process: unable to execute: No such file or directory
[   14.580097] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[   14.918894] init: failsafe main process (487) killed by TERM signal
[   14.978133] hda-intel 0000:04:01.0: Using VIACOMBO position fix
[   14.978196] snd_hda_intel 0000:04:01.0: PCI: Disallowing DAC for device
[   15.032802] SKU: Nid=0x0 sku_cfg=0x0000f603
[   15.032812] SKU: port_connectivity=0x0
[   15.032813] SKU: enable_pcbeep=0x1
[   15.032815] SKU: check_sum=0x00000000
[   15.032817] SKU: customization=0x00000000
[   15.032818] SKU: external_amp=0x0
[   15.032820] SKU: platform_type=0x0
[   15.032821] SKU: swap=0x1
[   15.032823] SKU: override=0x1
[   15.033251] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[   15.033253]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   15.033256]    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   15.033257]    mono: mono_out=0x0
[   15.033259]    dig-out=0x1e/0x0
[   15.033260]    inputs:
[   15.033263]      Rear Mic=0x18
[   15.033267]      Front Mic=0x19
[   15.033269]      Line=0x1a
[   15.033271]      CD=0x1c
[   15.033273] realtek: Enabling init ASM_ID=0xf603 CODEC_ID=10ec0883
[   15.071765] input: HDA VIA VT82xx Front Headphone as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input13
[   15.073653] input: HDA VIA VT82xx Line Out Side as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input12
[   15.079761] input: HDA VIA VT82xx Line Out CLFE as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input11
[   15.082853] input: HDA VIA VT82xx Line Out Surround as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input10
[   15.083328] input: HDA VIA VT82xx Line Out Front as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input9
[   15.084577] input: HDA VIA VT82xx Line as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input8
[   15.085010] input: HDA VIA VT82xx Front Mic as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input7
[   15.085414] input: HDA VIA VT82xx Rear Mic as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input6
[   16.103684] init: udev-fallback-graphics main process (678) terminated with status 1
[   18.344292] init: winbind main process (998) terminated with status 127
[   18.344320] init: winbind main process ended, respawning
[   18.375323] init: Failed to spawn nmbd main process: unable to execute: No such file or directory
[   18.504937] init: winbind main process (1027) terminated with status 127
[   18.504964] init: winbind main process ended, respawning
[   18.657856] init: winbind main process (1048) terminated with status 127
[   18.657886] init: winbind main process ended, respawning
[   18.713633] init: winbind main process (1063) terminated with status 127
[   18.713660] init: winbind main process ended, respawning
[   18.768409] init: winbind main process (1069) terminated with status 127
[   18.768437] init: winbind main process ended, respawning
[   18.831309] init: winbind main process (1073) terminated with status 127
[   18.831337] init: winbind main process ended, respawning
[   19.082716] init: winbind main process (1076) terminated with status 127
[   19.082744] init: winbind main process ended, respawning
[   19.239912] init: winbind main process (1092) terminated with statu
Активен

Rosen88

  • Участник
  • *****
  • Публикации: 168
  • Distribution: Calculate Linux Desktop 15.17
  • Window Manager: Mate 1.15
    • Профил
Re: Проблем с AMD процесор
« Отговор #42 -: Май 06, 2014, 18:48 »
Трябва ти поне двуядрен процесор с този който си каквато и дистрибуция да ползваш все ще ти товари.
Сигурно имаш в предвид "която и да е дистрибуция с Х" или просто "която и да е дистрибуция" ?

Значи, момчета, когато хората казваха, че Линукс върви на стари машини, на които Уиндоус ще изпитва затруднения - не са визирали Х-а.

Според мен и до ден днешен един Linux с Х, все още има по-високи изисквания като параметри, за разлика от Windows XP, дори да не кажа, че и много повече.

В голяма грешка си. След като машината ти по днешните стандарти е под нивото кучешка радост, а искаш да използваш дистрибуции среден клас.

http://puppylinux.org/wikka/LegacyOS

Това нещо може да върви на машината ти без грижи.
Активен

Процесор: AMD Vishera FX8320 4600MHz Noctua NH-D14
Дънна Платка: Gigabyte GA-990-FXA UD3 Rev 4.0
Памет: 16GB DDR3 1600MHz Adata
SSD: AMD Radeon R7 SSD 120GB
HDD: Western Digital Red 1TB
Видео: Powercolor hd7870 ghz edition 2gb gddr5 (v2)
Захранване: Fractal Design Integra M650

gat3way

  • Участник
  • *****
  • Публикации: 6050
  • Relentless troll
    • Профил
    • WWW
Re: Проблем с AMD процесор
« Отговор #43 -: Май 06, 2014, 23:04 »
Още по-голяма мистерия. Нищо интересно в dmesg Какъв беше хардуера и софтуера?
Активен

"Knowledge is power" - France is Bacon

petar258

  • Участник
  • *****
  • Публикации: 339
  • Distribution: Ubuntu-mate 16.04, Windows 7
    • Профил
Re: Проблем с AMD процесор
« Отговор #44 -: Май 07, 2014, 01:35 »
С тоя семпрон да не се чудиш що така става - нормално е за него. Той е само за работа с текстов редактор и нищо повече. Ако може да се сложи по-добър процесор на това дъно, намери и го смени. Нов няма да намериш, някой втора ръка.
Активен