Някой може ли да ми каже защо не ми рутира трафика?
Това е репорт, извинявам се че така го исипах но не знам как по друг начин да го сложа.
FREESCO v0.3.2 System Report. Generated - Sun Oct 31 12:34:46 2004
----- clock -----
Sun Oct 31 12:34:48 2004
----- cat /etc/system.cfg -----
# [System]
ROUTER=ethernet # dialup/leased/ethernet/bridge
HOSTNAME=router #611.Router name
DOMAIN=inet #612.(Local) domain name
ENAMSQ=y #11.Enable NAT and firewall
ENAPING=y #112. Enable ICMP responses.
ENABRG=n #12.Enable bridging mode
BIGMEM=y #13.If 16+MB RAM start ile command line history.
RAMDRIVE=y #13.If 17+MB RAM you can enable ramdrives
SAVERS=5,60 #14.Savers - screen(min),hdd(x5 sec) 0 -off
SWPSIZE=20 #15.Swap size in MB on boot device. 0 - off
LOGSIZE=150000,5000 #16.System_log,logins_log sizes (bytes)
ENABEEP=y #17.Enable beeps for certain events
ENAMON=n #20. Enamble flashing leds for Internet packets
COLORS=y #21. Enable console colors
ENAPNP=n #22. Enable ISA PnP
DEFISP= # Default dialup ISP
RDONLY=n #10. Make Freesco run entirely in ram with no disk usage.
# [Debug]
LOGDNS=y #412.Log DNS requests
LOGHTTP=n #182.HTTP/control logging
LOGCHAT=n #183.Dialout chat script debug logging
LOGPPPD=n #184.pppd debug logging
LOGDIALD=n #185.diald verbose logging
LOGIDENT=s #186.Debug ident or (s)tandard logging
LOGNET=1 #187.Log level for Netmeeting 0 to 4
LOGFTP=s #188.Debug FTP or (s)tandard logging
LOGFIRE=y #189.Log default firewall.
# [Services] # y - worldwide/s - local/n - disable
ENADNS=s #41.Enable caching DNS server
DNSCACHE=500 #411.Number of URL's to cache. 0 to dissable caching
ENACRON=y #42. Enable Cron deamon
ENADHCP=y #431.Enable DHCP server
WINSADDR= #432. WINS address (if external)
LIZTIME=604800,604800 #433,434 default-lease-time,max-lease-time
ENAWWW=s #441.Enable Public HTTP Server
WWWPORT=80 #442. on port
ENAWWA=s #451.Enable Time Server and control via HTTP
WWAPORT=82 #452. on port
TIMADDR=www.clock.org #453.Host timeserver address, empty - disable
TIMZONE=+0200 #454. Offset to UTC (-1200 -:- +1200)
ENALPD=n #461.Enable Print Servers
ENATEL=s #47. Enable telnet server
ENADYNDNS=y #49. Enable dynamic name client.
ENAID=s #50. Enable ident server.
ENAFTP=s #51. Enable FTP server.
FTPPORT=21 #512. on port.
FTPCON=10 #513. Maximum allowed FTP connections.
FTPANON=n #514. Enable anonymous FTP connections.
PKGDOMAIN=http://www.freescosoft.com/home/0.3.x/ # Default package domain.
PKGDIR=/www/downloads # Default package save directory.
# [ Print server #1 ]
ALLOWED0=1 # A picture that all client IP's must match.
LPPORT0=515
LPDEV0=lp1
# [Security]
TRUSTLN=n #241.Trust local nets y/n/p{artual}
TRUSTMD=n #242.Modem links have access to local networks
RINGS=3,8 #220.Rings before answer at login,nologin time
MonTIM="" #221.Nologin times for modem users
TueTIM=""
WedTIM=""
ThuTIM=""
FriTIM=""
SatTIM=""
SunTIM=""
# [Hardware COM Ports]
# [Modems]
MINIT0="ATZ"
MTUALL= # MTU for all dial-in links
MRUALL= # MRU for all dial-in links
# [ diald ]
RDTOUT= #821 delay between dialing attempts (seconds)
RTRCNT= #822 maximum number of initial attempts
DRTRCNT= #823 maximum number of restoring attempts
RBKOFF= #824 increase redial timeout after failure (seconds)
DFAILIM= #825 maximum number of consecutive failed attempts
FPTOUT= #826 timeout of the very first packet sent (seconds)
# [leased line router]
ADRTYPE= #921.if ISP supplies us with dynamic IP, then:
LOCAL= #922.fake local side ppp IP addr
REMOTE= #923.fake remote addr
# [ethernet/leased/printer/ras router]
GATEWAY=83.148.80.193 #62. 631.Default gateway, if exist.
DNSADDR=212.116.158.130 #414.Primary DNS address for ethernet connection
DNSADDR1=212.116.158.133 #415.Secondary DNS address for ethernet connection
PROXY="" #914.HTTP proxy addr[:port]
# [Ethernet hardware]
IO0=0
IRQ0=0
IO1=0
IRQ1=0
# [Network 0]
USEDHCP0=n #720. Use DHCP client to config this interface
DHCPLOG=n #722. Enable DHCP client messages in the log
DHCPDNS=y #723. Enable auto configuration of DNS via DHCP
INTNAME0=eth0 # Interface name (eth0|arc0e|arc0)
IPADDR0=83.148.80.195 # IP adress of this interface
NETMASK0=255.255.255.128 # Network mask
NETWORK0=83.148.80.128 # Network address
BRDCAST0=83.148.80.255 # Broadcast address
IPRANGE0="" # IP pool, empty disables DHCP on this interface
# [Network 1]
INTNAME1=eth1 # Interface name (eth1|arc1e|arc1)
IPADDR1=192.168.1.1 # IP adress of this interface
NETMASK1=255.255.0.0 # Network mask
NETWORK1=192.168.0.0 # Network address
BRDCAST1=192.168.255.255 # Broadcast address
IPRANGE1="192.168.1.10 192.168.1.15" # IP pool, empty disables DHCP on this interface
----- cat /etc/live.cfg -----
BOOTMOD=
VERSION=0.3.2
BOOTDEV=hda1
BOOTIME="Sun Oct 31 12:32
1 2004"
----- cat /etc/dhcpc/dhcpcd-eth0.info -----
----- cat /etc/portfw.cfg | sed s/\#.*// -----
----- cat /etc/banlist.cfg | sed s/\#.*// -----
----- sed -n 1,/Secret/P /etc/chat.pwd -----
ISPFILE=
----- lsmod -----
Module Pages Used by
rtl8139.e-n 3 1
pci-scan.e-n 1 [rtl8139.e-n] 1
eepro100.e-n 4 1
pci-scan.e 1 [eepro100.e-n] 1
ip_masq_netmeeting 2 0
ip_masq_ftp 1 0
ip_masq_irc 1 0
ip_masq_vdolive 1 0
ip_masq_raudio 1 0
ip_masq_icq 1 0
ip_masq_cuseeme 1 0
8390 2 0
----- dmesg | grep eth -----
eth0: OEM Intel PCI EtherExpress Pro100 at 0x3024000, 00:50:8B:5A:F3:C1, IRQ 10.
eth1: RealTek RTL8139C Fast Ethernet at 0xfc00, IRQ 9, 00:c0:26:79:48:8c.
----- ifconfig -----
lo Link encap:Local Loopback
inet addr:127.0.0.1 Bcast:127.255.255.255 Mask:255.0.0.0
UP BROADCAST LOOPBACK RUNNING MTU:3584 Metric:1
RX packets:20 errors:0 dropped:0 overruns:0
TX packets:20 errors:0 dropped:0 overruns:0
eth0 Link encap:10Mbps Ethernet HWaddr 00:50:8B:5A:F3:C1
inet addr:83.148.80.195 Bcast:83.148.80.255 Mask:255.255.255.128
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0
TX packets:6 errors:0 dropped:0 overruns:6
Interrupt:10 Base address:0x4000
eth1 Link encap:10Mbps Ethernet HWaddr 00:C0:26:79:48:8C
inet addr:192.168.1.1 Bcast:192.168.255.255 Mask:255.255.0.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:201 errors:0 dropped:0 overruns:0
TX packets:185 errors:0 dropped:0 overruns:0
Interrupt:9 Base address:0xfc00
----- cat /proc/interrupts -----
0: 17218 timer
1: 8 keyboard
2: 0 cascade
8: 1 + rtc
9: 386 eth1
10: 88 eth0
13: 1 math error
14: 544 + ide0
----- cat /proc/ioports -----
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-009f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : npu
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0378-037f : lp
03c0-03df : vga+
03f0-03f5 : floppy
03f6-03f6 : ide0
03f7-03f7 : floppy DIR
03f8-03ff : serial(auto)
fc00-fc7f : eth1
3024000-3024fff : eth0
----- route -n -----
Kernel routing table
Destination Gateway Genmask Flags MSS Window Use Iface
255.255.255.255 * 255.255.255.255 UH 1500 0 0 eth1
255.255.255.255 * 255.255.255.255 UH 1500 0 0 eth0
83.148.80.128 * 255.255.255.128 U 1500 0 1 eth0
192.168.0.0 * 255.255.0.0 U 1500 0 2 eth1
127.0.0.0 * 255.0.0.0 U 3584 0 3 lo
default 83.148.80.193 * UG 1500 0 2 eth0
----- cat /etc/dhcpd.leases -----
----- free -----
total: used: free: shared: buffers: cached:
Mem: 39981056 20594688 19386368 6328320 11800576 1236992
Swap: 20967424 0 20967424
MemTotal: 39044 kB
MemFree: 18932 kB
MemShared: 6180 kB
Buffers: 11524 kB
Cached: 1208 kB
SwapTotal: 20476 kB
SwapFree: 20476 kB
Mounted FS:
/dev/root / ext2 rw 0 0
/proc /proc proc rw 0 0
/dev/hda1 /mnt/bootdev umsdos rw 0 0
/dev/ram1 /mnt/ram1 ext2 rw 0 0
/dev/ram2 /mnt/ram2 ext2 rw 0 0
Filesystem 1024-blocks Used Available Capacity Mounted on
/dev/ram0 2901 1890 1011 65% /
/dev/hda1 56068 22396 33672 40% /mnt/bootdev
/dev/ram1 3963 3 3960 0% /mnt/ram1
/dev/ram2 3963 2 3961 0% /mnt/ram2
----- ps -----
Pid Stat Parent Line Name Command
1 S 0 init init
2 S 1 kflushd
3 S 1 kswapd
4 S 1 logrotate sh/sbin/logrotate
13 S 1 update update
26 S 1 syslogd syslogd-r-h-m0
28 S 1 klogd klogd
85 S 1 daemon sh/sbin/daemon-agetty 9600 tty2
87 S 85 agetty agetty9600tty2
1232 S 1 daemon sh/sbin/daemon-telnetd -debug
1234 S 1232 telnetd telnetd-debug
1314 S 1 dnsmasq dnsmasq-Rnbqf-S212.116.158.130-S212.116.158.133-l/etc/dhcpd.leases-sinet-c500
1403 S 1 dhcpd dhcpd-qeth1
1485 S 1 thttpd thttpd-p82-uroot-d/wwa-l/dev/null
1496 S 1 thttpd thttpd-p80-unobody-d/www-l/dev/null
1581 S 1 pure-ftpd pure-ftpd (SERVER)
1669 S 1 oidentd oidentd-m-F-unobody-gnobody-xrouter
1841 S 1 crond crond-b-c/etc/cron
2099 S 1 daemon sh/sbin/daemon-agetty 9600 tty1
2101 S 2099 agetty agetty9600tty1
2163 S 1234 ttyp0 ile ile
2172 S 2163 ttyp0 sh sh
2176 S 4 sleep sleep11
2177 S 2172 ttyp0 report sh/bin/report
2182 S 2177 ttyp0 report sh/bin/report
2183 S 2177 ttyp0 sed sed/^$/d
2213 R 2182 ttyp0 ps sh/bin/ps
----- cat /etc/ppp/opt* -----
asyncmap 0
----- setserial -bg /dev/cua? -----
/dev/cua0 at 0x03f8 (irq = 4) is a 16550A
/dev/cua1 at 0x02f8 (irq = 3) is a 16550A
----- ls /pkg/db/ |sed -n '/patches/P' -----
----- cat /etc/isapnp.cfg |sed 's/#.*//g' -----
Автор
Тема: FreeSCO (Прочетена 1480 пъти)
Feb 01, 2005, 21:17