imam kofti problem
 na systema mdk 9.1 iskam da si pusna grafiki 4rez mrtg -to
 oba4e snmp-to mai ne raboti kakto trabva ili da go kajem
izob6to neraboti
pir startirane na cfgmaker izliza slednoto
SNMP Error:
no response received
 SNMPv1_Session (remote host: "192.168.0.1"
[192.168.0.1].161)
                  community: "public"
                 request ID: -809575174
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
  at /usr/local/mrtg-2/bin/../lib/mrtg2/SNMP_util.pm line
571
 SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.8 on
public@192.168.0.1:
 at ./cfgmaker line 107
a snmpd -to mi e startirano 
nqkakvi idei kade e problema?
blagodarq predvaritelno

problema ti e w community stringa v snmpd.conf
 sloji rocommunity "neshto si" syshtoto go opisvash i v
mrtg.cfg 

 10x 6te probvam vednaga no tova "ne6to si" dali e tolkova
 malovajno.ako moje6 da mi dade6 po-podrobno info 6te ti buda
mnogo blagodaren

Otnovo sy6tite gre6ki
eto o6te malko info:
at /usr/local/mrtg-2/bin/../lib/mrtg2/SNMP_util.pm line 458
 SNMPGET Problem for sysDescr sysContact sysName sysLocation
sysObjectID on public@192.168.0.1:
 at ./cfgmaker line 674
--base: Vendor Id:
--base: Populating confcache
 --snpo: Skipping ifDescr scanning because
public@192.168.0.1: does not seem to support it
 --snpo: Skipping ipAdEntIfIndex scanning because
public@192.168.0.1: does not seem to support it
 --snpo: Skipping ifName scanning because public@192.168.0.1:
does not seem to support it
 --snpo: Skipping ifType scanning because public@192.168.0.1:
does not seem to support it
 --snpo: Skipping ifPhysAddress scanning because
public@192.168.0.1: does not seem to support it
--base: Get Interface Info
--base: Walking ifIndex
SNMP Error:
no response received
 SNMPv1_Session (remote host: "192.168.0.1"
[192.168.0.1].161)
                  community: "public"
                 request ID: -1206483464
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
  at /usr/local/mrtg-2/bin/../lib/mrtg2/SNMP_util.pm line
571
 SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.1 on
public@192.168.0.1:
 at ./cfgmaker line 107
--base: Walking ifType
I o6te ne6to 
 Nqmam mrtg.cfg po default - az li trqbva da go sazdam ili
lipsata mu e problem
10x predvaritelno za byde6tata pomo6t