Начало Вход/Регистрация Помощ Tazi stranica s latinski bukwi
Области
 Новини
 Актуална тема
 Linux портали
 Какво е Линукс?
 Въпроси-отговори
 Форуми
   •Трудова борса
   •Конкурс
 Статии
 Дистрибуции
   •Поръчка на CD
 Made In BG
 Файлове
 Връзки
 Галерия
 Конференции
Настройки
 Външен вид
 Предложения
 Направи си сам
И още ...
 За нас
 Линукс за българи ЕООД
 Линк към нас
 Предложения

Подкрепяно от:
TelePoint - Място за хора със свободни идеи

SiteGround

initLab

Adsys Group

SAP Bulgaria

Въпроси отговори
Въпрос: 1152x864 debian
[Търси: ]

ВНИМАНИЕ: Използвайте форумите на сайта за дa зададете вашите въпроси.

Към началото |Добави въпрос |Отговори
 
Въпрос
От: stok (stok_bg __@__ yahoo[ точка ]com) Дата: 08/23/2003
 Zdraveite, kak moga da napravq monitora da raboti na
 chestota po-golqma ot 75Hz pri razdelitelna sposobnost
1152x864? 
Xserevera e 4.2.1 - debian - Nvidia GeForce
A tova mi e XF86Config-4 :



### BEGIN DEBCONF SECTION
 # XF86Config-4 (XFree86 server configuration file) generated
by dexconf, the
 # Debian X Configuration tool, using values from the debconf
database.
#
 # Edit this file with caution, and see the XF86Config-4
manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
 # If you want your changes to this file preserved by
dexconf, only make changes
 # before the "### BEGIN DEBCONF SECTION" line above, and/or
after the
# "### END DEBCONF SECTION" line below.
#
 # To change things within the debconf section, run the
command:
#   dpkg-reconfigure xserver-xfree86
 # as root.  Also see "How do I add custom sections to a
dexconf-generated
 # XF86Config or XF86Config-4 file?" in
/usr/share/doc/xfree86-common/FAQ.gz.

Section "Files"
         FontPath
"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
	FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
        

	FontPath	"unix/:7100"			# local font server
 	# if the local font server has problems, we can fall back
on these
	FontPath	"/usr/lib/X11/fonts/Type1"
	FontPath	"/usr/lib/X11/fonts/CID"
	FontPath	"/usr/lib/X11/fonts/Speedo"
	FontPath	"/usr/lib/X11/fonts/misc"
	FontPath	"/usr/lib/X11/fonts/cyrillic"
	FontPath	"/usr/lib/X11/fonts/100dpi"
	FontPath	"/usr/lib/X11/fonts/75dpi"
#       FontPath        "/usr/lib/X11/fonts/TrueType"
        FontPath        "/usr/lib/X11/fonts/TT"
EndSection

Section "Module"
#	Load	"GLcore"
	Load	"bitmap"
	Load	"dbe"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"record"
	Load	"speedo"
	Load	"type1"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"keyboard"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xfree86"
	Option		"XkbModel"	"pc104"
	Option		"XkbLayout"	"bg"
	Option          "XkbVariant"    "phonetic"
 	Option          "XkbOptions"   
"grp:alt_shift_toggle,grp_led:scroll"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/psaux"
	Option		"Protocol"		"PS/2"
	Option		"Emulate3Buttons"	"true"
#	Option		"ZAxisMapping"		"4 5"
EndSection

Section "InputDevice"
	Identifier	"Generic Mouse"
	Driver		"mouse"
	Option		"SendCoreEvents"	"true"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ImPS/2"
	Option		"Emulate3Buttons"	"true"
	Option		"ZAxisMapping"		"4 5"
EndSection

Section "Device"
	Identifier	"Generic Video Card"
	Driver		"nvidia"
EndSection

Section "Monitor"
	Identifier	"Generic Monitor"
	HorizSync	68.76
	VertRefresh	85.22
	Option		"DPMS"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"Generic Video Card"
	Monitor		"Generic Monitor"
	DefaultDepth	16
	SubSection "Display"
		Depth		1
		Modes		"1152x864"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1152x864"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1152x864"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1152x864"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1152x864"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1152x864"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
	InputDevice	"Generic Mouse"
EndSection

Section "DRI"
	Mode	0666
EndSection

### END DEBCONF SECTION

Pri tozi fail puska x-a na 1024x768 @ 85Hz


Отговор #1
От: Andrei Andreev (webservices__at__mail[ точка ]bg) Дата: 08/23/2003
 Tova ne e jelatelno da go pravish,zashtoto na tazi resulucia
monitora ti edva li shte digne poveche oy 75hz.
 Takova dejstvie ot tvoq strana moja da ti donese samo
glavoboliq...



Отговор #2
От: stok (stok_bg (a) yahoo __точка__ com) Дата: 08/23/2003
Monitora e Compaq P910 i raboti na tazi rezoluciq.
Sega trygna na 1280x1024 @ 85Hz. A na 1152x864 neiska
HorizSync   80-100

#    HorizSync	30-64         # multisync
 #    HorizSync	31.5, 35.2    # multiple fixed sync
frequencies
 #    HorizSync	15-25, 30-50  # multiple ranges of sync
frequencies

# VertRefresh is in Hz unless units are specified.
 # VertRefresh may be a comma separated list of discrete
values, or a
# comma separated list of ranges of values.
 # NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR
MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 40-150

Subsection "Display"
        Depth       8
         Modes       "640x480" "800x600" "1024x768"
"1280x1024"
        ViewPort    0 0
        Virtual     1600 1280
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1280x1024"
        ViewPort    0 0
        Virtual     1280 1024
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1024x768" "1280x1024"
        ViewPort    0 0
        Virtual     1152 900
    EndSubsection
EndSection

ne znam kakvo da go napravq.
Kak da gi opredelq tezi chestoti?
:)


Отговор #3
От: stok (stok_bg (a) yahoo[ точка ]com) Дата: 08/23/2003
Nai-posle imam 1152x864/99Hz  :)))


Section "Monitor"
	Identifier	"Monitor0"
	Option	"DPMS"	"true"
	VendorName	"DEL"
	ModelName	"DEL5178"
	HorizSync 30-107# DDC-probed
	VertRefresh  50-120# Very conservative. May flicker.
 	# These are the DDC-probed settings reported by your
monitor.
	# 1600x1200, 85.0Hz; hfreq=106.25, vfreq=85.00
 	ModeLine "1600x1200"	229.50 1600 1664 1856 2160 1200 1201
1204 1250 +hsync +vsync
	# 1600x1200, 75.0Hz; hfreq=93.75, vfreq=75.00
 	ModeLine "1600x1200"	202.50 1600 1664 1856 2160 1200 1201
1204 1250 +hsync +vsync
	# 1280x1024, 85.0Hz; hfreq=91.15, vfreq=85.02
 	ModeLine "1280x1024"	157.50 1280 1344 1504 1728 1024 1025
1028 1072 +hsync +vsync
	# 1024x768, 75.0Hz; hfreq=60.02, vfreq=75.03
 	ModeLine "1024x768"	 78.75 1024 1040 1136 1312  768  769 
772  800 +hsync +vsync
	# 800x600, 85.0Hz; hfreq=53.67, vfreq=85.06
 	ModeLine "800x600"	 56.25  800  832  896 1048  600  601 
604  631 +hsync +vsync
	# 800x600, 75.0Hz; hfreq=46.88, vfreq=75.00
 	ModeLine "800x600"	 49.50  800  816  896 1056  600  601 
604  625 +hsync +vsync
	# 800x600, 72.0Hz; hfreq=48.08, vfreq=72.19
 	ModeLine "800x600"	 50.00  800  856  976 1040  600  637 
643  666 +hsync +vsync
	# 800x600, 60.0Hz; hfreq=37.88, vfreq=60.32
 	ModeLine "800x600"	 40.00  800  840  968 1056  600  601 
605  628 +hsync +vsync
	# 640x480, 85.0Hz; hfreq=43.27, vfreq=85.01
 	ModeLine "640x480"	 36.00  640  696  752  832  480  481 
484  509 -hsync -vsync
	# 640x480, 75.0Hz; hfreq=37.50, vfreq=75.00
 	ModeLine "640x480"	 31.50  640  656  720  840  480  481 
484  500 -hsync -vsync
	# 640x480, 60.0Hz; hfreq=31.47, vfreq=59.94
 	ModeLine "640x480"	 25.17  640  648  744  784  480  482 
484  509 -hsync -vsync
	# 1152x864, 85Hz; hfreq=77.31, vfreq=85.15
         ModeLine "1152x864"     115.29 1152 1184 1472 1504 
864  880  892  908 +hsync +vsync
 	ModeLine	"1152x864/99Hz" 137.65 1152 1184 1312 1536 864 866
885 902  -HSync -VSync
EndSection


<< bugav сервер (6 ) | mysqld connection problem (13 ) >>

 
© 2011-... Асоциация "Линукс за българи"
© 2007-2010 Линукс за българи ЕООД
© 1999-2006 Slavej Karadjov
Ако искате да препечатате или цитирате информация от този сайт прочетете първо това
Външния вид е направен от MOMCHE
Code Version: 1.0.8 H (Revision: 23-09-2011)
 
Изпълнението отне: 0 wallclock secs ( 0.07 usr + 0.01 sys = 0.08 CPU)