[conky-all_1.8.0_1_i386.deb]

Ако искаш да ти се помогне, кажи какво си искал да направиш, какво си направил, какъв е резултата от действията ти, а ти какъв си очаквал. Конки има все възможни опции и ние не знаем, точно какви са ти потребни.

Ето какво направих.Първо изтеглих conky-all_1.8.0_1_i386.deb.Отворих Термиинала и писах:

Код:

dpkg -i  *.deb

и това е резултата:

Selecting previously deselected package conky-all.
(Reading database ... 246574 files and directories currently installed.)
Unpacking conky-all (from conky-all_1.8.0-1_i386.deb) ...
Replacing files in old package conky ...
dpkg: dependency problems prevent configuration of conky-all:
 conky-all depends on libasound2 (>> 1.0.18); however:
  Version of libasound2 on system is 1.0.17a-0ubuntu4.
 conky-all depends on libc6 (>= 2.9); however:
  Version of libc6 on system is 2.8~20080505-0ubuntu9.
 conky-all depends on libimlib2; however:
  Package libimlib2 is not installed.
 conky-all depends on libiw30 (>= 30~pre1); however:
  Package libiw30 is not installed.
 conky-all depends on libncurses5 (>= 5.7+20100313); however:
  Version of libncurses5 on system is 5.6+20071124-1ubuntu2.
 conky-all depends on libxml2 (>= 2.7.4); however:
  Version of libxml2 on system is 2.6.32.dfsg-4ubuntu1.1.
dpkg: error processing conky-all (--install):
 dependency problems - leaving unconfigured
Processing triggers for man-db ...
Processing triggers for menu ...
Errors were encountered while processing:
 conky-all

След това написах :

Код:

apt-get install -f

и ми извади това:

Reading package lists... Done
Building dependency tree
Reading state information... Done
Correcting dependencies... Done
The following packages were automatically installed and are no longer required:
  libid3tag0 libimlib2
Use 'apt-get autoremove' to remove them.
The following extra packages will be installed:
  libid3tag0 libimlib2
The following packages will be REMOVED:
  conky-all
The following NEW packages will be installed:
  libid3tag0 libimlib2
0 upgraded, 2 newly installed, 1 to remove and 0 not upgraded.
1 not fully installed or removed.
Need to get 233kB of archives.
After this operation, 496kB disk space will be freed.
Do you want to continue [Y/n]? y
Get:1 http://archive.offensive-security.com pwnsauce/main libid3tag0 0.15.1b-10 [36.9kB]
Get:2 http://archive.offensive-security.com pwnsauce/main libimlib2 1.4.0-1.1ubuntu1.1 [196kB]
Fetched 233kB in 1s (195kB/s)
(Reading database ... 246593 files and directories currently installed.)
Removing conky-all ...
Processing triggers for menu ...
Processing triggers for man-db ...
Selecting previously deselected package libid3tag0.
(Reading database ... 246573 files and directories currently installed.)
Unpacking libid3tag0 (from .../libid3tag0_0.15.1b-10_i386.deb) ...
Selecting previously deselected package libimlib2.
Unpacking libimlib2 (from .../libimlib2_1.4.0-1.1ubuntu1.1_i386.deb) ...
Setting up libid3tag0 (0.15.1b-10) ...

Setting up libimlib2 (1.4.0-1.1ubuntu1.1) ...

Processing triggers for libc6 ...
ldconfig deferred processing now taking place

Търсих  да  добавя хранилище но не  успях да открия.Искам   да ползвам тези опции Lua, Cairo и Imlib2
,а в това conky,което е  инсталирано по подразбиране ги няма.

Код:

conky -v
Conky 1.6.1 compiled Fri Oct 10 21:10:56 UTC 2008 for Linux 2.6.24-16-server (i686)

Compiled in features:

System config file: /etc/conky/conky.conf

 X11:
  * Xdamage extension
  * Xdbe extension (double buffer)
  * xft

 Music detection:
  * mpd

 General features:
  * math
  * hddtemp
  * portmon
  * rss
  * wireless

Здравейте.От  вчера съм с тази дистрибуция.Харесва ми как се държи всичко работи нормално.Опитах да  си инсталирам conky 1.8.0 за да мога да ползвам всичките му благини,но до сега тия опити са неуспешни.Ако някой знае как да го направя ще съм му много благодарен ако сподели.

Искам на Десктопа на ми седи информация за Времето. Из нета намерих само разни програмки, които работят с някаква "Суперкарамба", но тя пък не работела под Гном.
Ами това е, ако някой ми подхвърли идея, ще съм му благодарен.
Ако не съм нацелил раздела за темата, съжалявам...

Ето ти и един conkyscript от  мен надявам се да ти хареса.



Всичко нужно да го подкараш съм го добавил в прикачения файл.

WI-FIконтролера ми е:
Ralink RT2561/RT61  802.11g PCI

[/etc/init.d/networking start]

Здравейте.Днес си изтеглих BT4,но не мога да си пусна мрежата.Не съм го инсталирал още само съм го пуснал на LIVE-USB.След като изписах /etc/init.d/networking start ми показа този резултат:

Код:

Configuring network interfaces...eth0: ERROR while getting interface flags: No such device
Internet Systems Consortium DHCP Client V3.1.1
Copyright 2004-2008 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/

SIOCSIFADDR: No such device
eth0: ERROR while getting interface flags: No such device
eth0: ERROR while getting interface flags: No such device
Bind socket to interface: No such device
Failed to bring up eth0.
eth1: ERROR while getting interface flags: No such device
Internet Systems Consortium DHCP Client V3.1.1
Copyright 2004-2008 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/

SIOCSIFADDR: No such device
eth1: ERROR while getting interface flags: No such device
eth1: ERROR while getting interface flags: No such device
Bind socket to interface: No such device
Failed to bring up eth1.
eth2: ERROR while getting interface flags: No such device
Internet Systems Consortium DHCP Client V3.1.1
Copyright 2004-2008 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/

SIOCSIFADDR: No such device
eth2: ERROR while getting interface flags: No such device
eth2: ERROR while getting interface flags: No such device
Bind socket to interface: No such device
Failed to bring up eth2.
ath0: ERROR while getting interface flags: No such device
Internet Systems Consortium DHCP Client V3.1.1
Copyright 2004-2008 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/

SIOCSIFADDR: No such device
ath0: ERROR while getting interface flags: No such device
ath0: ERROR while getting interface flags: No such device
Bind socket to interface: No such device
Failed to bring up ath0.
Internet Systems Consortium DHCP Client V3.1.1
Copyright 2004-2008 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/

Listening on LPF/wlan0/00:0e:2e:cc:4d:e6
Sending on   LPF/wlan0/00:0e:2e:cc:4d:e6
Sending on   Socket/fallback
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 8
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 12
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 12
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 12
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 11
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 6
No DHCPOFFERS received.
No working leases in persistent database - sleeping.
if-up.d/mountnfs[wlan0]: waiting for interface eth0 before doing NFS mounts
if-up.d/mountnfs[wlan0]: waiting for interface eth1 before doing NFS mounts
if-up.d/mountnfs[wlan0]: waiting for interface eth2 before doing NFS mounts
if-up.d/mountnfs[wlan0]: waiting for interface ath0 before doing NFS mounts
done.

А като изпиша iwconfig ми дава това:

Код:

root@bt:~# iwconfig
lo        no wireless extensions.

wmaster0  no wireless extensions.

wlan0     IEEE 802.11bg  ESSID:""
          Mode:Managed  Frequency:2.412 GHz  Access Point: Not-Associated
          Tx-Power=12 dBm
          Retry min limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off
          Link Quality:0  Signal level:0  Noise level:0
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

Лан-картата ми не работи и за това ползвам само WI-FI.Какво да направя за да подкарам нет-а?Благодаря предварително

awe hora pomognete mi ne moga da otkriq kodeci za filmi i mp3 dajte mi nqkoj link za da gi izteglq

може ли някой да ми каже как да си направя интернет настройките.аз съм начинаещ още.вчера цял ден се борих с едно лайф сд и не можах.значи аз влизам с потребителко име и парола.ще ви бъда много благодарен.интернета ми е PPOE