Автор Тема: Slack 9.1 + kernel 2.6.x  (Прочетена 4164 пъти)

Sertys

  • Напреднали
  • *****
  • Публикации: 26
    • Профил
Slack 9.1 + kernel 2.6.x
« -: Mar 26, 2004, 15:52 »
Сичко си е песен... даунлоад-вам го сорса, слагам го в /usr/src/linux-2.6.0, правя си символния линк към /usr/src/linux. Пускам си конфиг-а , сичко е ОК, компилирам, мейк модюлс , маке модюлс_инстал, маке инстал. Слага си го в ЛИЛО-то, буут-вам с него и ми казва KERNEL_PANIC: VFS :unable to mount root fs.Append valid root= attribute(или нещо такова).
Очевидно става въпрос за дисковата част от системата, но къде, при положение че /дев/хда3 ми е райзърФС, а съм го сложил като вграден в кернела. Ами да ли не е драйвера на ИДЕ-то? Какви ли не комбинаций пробвах. Отчаян съм. И с 2.4.22 работи ама друго си е 2.6.0 примерно направен само за моя хардуер. Ето ви .конфиг-а , който използвам, може да има леки разминавания.
Примерен код

#
# Device Drivers
#

#
# Generic Driver Options
#

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
# CONFIG_PARPORT is not set

#
# Plug and Play support
#
CONFIG_PNP=y
CONFIG_PNP_DEBUG=y

#
# Protocols
#
# CONFIG_ISAPNP is not set
CONFIG_PNPBIOS=y

#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
# CONFIG_LBD is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
CONFIG_BLK_DEV_HD_IDE=y
# CONFIG_BLK_DEV_IDEDISK is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
CONFIG_IDE_TASK_IOCTL=y
CONFIG_IDE_TASKFILE_IO=y

#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPNP=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_IDEDMA_FORCED=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_IDEDMA_ONLYDISK=y
CONFIG_IDEDMA_PCI_WIP=y
CONFIG_IDEDMA_NEW_DRIVE_LISTINGS=y
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=y
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=m
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_IVB=y
CONFIG_IDEDMA_AUTO=y
# CONFIG_DMA_NONPCI is not set
CONFIG_BLK_DEV_HD=y

#
# SCSI device support
#
CONFIG_SCSI=m
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
# CONFIG_BLK_DEV_SD is not set
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_REPORT_LUNS=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Fusion MPT device support
#
------------------------

Малко съкращения има.

Примерен код

#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_JFS_FS=m
# CONFIG_JFS_POSIX_ACL is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=y
# CONFIG_AUTOFS4_FS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y
CONFIG_NTFS_DEBUG=y
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
CONFIG_DEVFS_DEBUG=y
CONFIG_DEVPTS_FS=y
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_GSS is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
# CONFIG_MSDOS_PARTITION is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_NEC98_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
CONFIG_NLS=y

#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_IOVIRT is not set
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_FRAME_POINTER is not set
CONFIG_X86_EXTRA_IRQS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y

#
# Security options
#
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
# CONFIG_CRYPTO is not set

#
# Library routines
#
CONFIG_CRC32=y
CONFIG_ZLIB_INFLATE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_PC=y
Активен

  • Гост
Slack 9.1 + kernel 2.6.x
« Отговор #1 -: Mar 26, 2004, 16:06 »
ne sam golqm ekspert i az ne mozah da go podkaram 2.6.4 sas SuSE, no da dam akal - na men taka mi kazwa kogato nqmam initrd - probwaj da slozish edno initrd
Активен

melwin

  • Напреднали
  • *****
  • Публикации: 222
    • Профил
Slack 9.1 + kernel 2.6.x
« Отговор #2 -: Mar 26, 2004, 16:23 »
конфигурацията изглежда добре ..
опитай следните неща
make mrproper след което си прекомпилирай ядрото с make bzImage.Копирай го ръчно в /boot и ръчно си редактирай lilo.conf
Недей да даваш make install.

P.S.Съветвам те да си оставиш поддръжката за ext2 и ext3
Активен
The second is the basic unit of time. It is the length of time taken for 9192631770 periods of vibration of the caesium-133 atom to occur.

Demi

  • Напреднали
  • *****
  • Публикации: 74
    • Профил
Slack 9.1 + kernel 2.6.x
« Отговор #3 -: Mar 27, 2004, 15:28 »
С тази команда последната make install обработваш бутменажера,
но там се записва root=LABEL=/ И ТОВА ТРЯБВА ДА СЕ ПРОМЕНИ НА
root=/dev/hda... което е дяла на Linux.
Активен

Sertys

  • Напреднали
  • *****
  • Публикации: 26
    • Профил
Slack 9.1 + kernel 2.6.x
« Отговор #4 -: Mar 27, 2004, 17:05 »
Ето така ми изглежда lilo.conf, правя го и без маке инсталл , но......

Примерен код

boot="/dev/hda"
map=/boot/map
lba32
prompt
timeout="1200"
vga="791"


image="/boot/vmlinuz-ide-2.4.22"
   label="2.4.22"
   root="/dev/hda3"
   read-only

image="/boot/bzImage"
   label=Slack2.6.0


        root="/dev/hda3"
   read-only
   optional
        
other=/dev/hda5
   label="NT"
Активен

kmf

  • Участници
  • ***
  • Публикации: 7
    • Профил
Slack 9.1 + kernel 2.6.x
« Отговор #5 -: Mar 27, 2004, 18:03 »
Privet,
V konfiga pravi vpecatlenie ce sa "zabraneni"  ext2_fs i ext3_fs ,  sasto  i
"CONFIG_REISERFS_CHECK is not set"  . Ako e nalize swap partition
mai ste sa  neobhodimi.  Ne sam expert no mislja preconfigurirai otnovo kernela.
Az uspjah ot parvija pat, no sam s ext2_fs... po navik :-)  Ste e po sigurno da se
otgovarja pone parvija pat s "yes"  po-cesto za da tragne. Ponjakoga neusetno
se narushavat zavisimosti, koito njama kak da poznavame. Inace skorosta pri ra-
bota s novija kernel e neverojatna. Osobeno v GUI rejim.
Eventualno pomisli sasto lilo v MBR li e instaliran ili root. Ako e root pogledni s
fdisk dali ima bootable flag pred hda3(edna zvezdicka *). Ako ne, tova ste e.
Premesti ja s opzijata  "a" na fdisk.
Uspeh !!!
Активен

paveldikov

  • Напреднали
  • *****
  • Публикации: 502
  • Ultra God Master
    • Профил
    • WWW
Slack 9.1 + kernel 2.6.x
« Отговор #6 -: Apr 04, 2004, 22:50 »
Това:
Примерен код
image="/boot/bzImage"
label=Slack2.6.0

трябва да е:
Примерен код
image="/boot/bzImage"
label=Slack2.6.0
root=/dev/hda3

Много разстояние оставяш между "label=" и "root=" и LiLo разбира накриво.
Активен
FreeBSD 6.1-RELEASE - The Power To Serve | Slackware Linux 10.0

The Dark Star - YOUR next operating system

Sertys

  • Напреднали
  • *****
  • Публикации: 26
    • Профил
Slack 9.1 + kernel 2.6.x
« Отговор #7 -: Apr 17, 2004, 15:47 »
Затварям темата - оправих кернел-а по мнооого прост начин - направих make config и след 2000 y/n/m го подкарах да работи на пушка .

Всичко е шестица.
Активен

Подобни теми
Заглавие Започната от Отговора Прегледи Последна публикация
Slack 9.0 CD now!
Настройка на програми 		Nerdboy 0 5205 Последна публикация Mar 19, 2003, 14:32
от Nerdboy
Slack 9.0
Настройка на програми 		Unufry 1 6097 Последна публикация May 11, 2003, 12:20
от HUMAN_FACTOR
CD-R/RW pod Slack 9.1
Хардуерни и софтуерни проблеми 		Machkonti 5 5617 Последна публикация Nov 03, 2003, 22:11
от zazzko
kernel 2.6.7+slack 9.1+pppoe
Настройка на програми 		martos 1 3205 Последна публикация Jul 12, 2004, 12:19
от martos
ReiserFS + Slack 10 + kernel 2.6.8.1
Настройка на програми 		empty 1 3502 Последна публикация Oct 18, 2004, 07:18
от