Изпечатай

[techobg]

Примерен код

Note: You have enabled demand-connection; adsl-status may be inaccurate. adsl-status: Link is up and running on interface ppp0 ppp0      Link encap:Point-to-Point Protocol           inet addr:10.112.112.112  P-t-P:10.112.112.113  Mask:255.255.255.255           UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1492  Metric:1           RX packets:0 errors:0 dropped:0 overruns:0 frame:0           TX packets:1 errors:0 dropped:0 overruns:0 carrier:0           collisions:0 txqueuelen:3           RX bytes:0 (0.0 b)  TX bytes:44 (44.0 b)

Въпросът ми е как да си смена inet-адреса и p-t-p :.......Пробвах много варианти но не става!
Използвам YSO Linux....KDE

[zeridon]

не можеш достав4ика ти ги назначава автоматично

Цитат (zeridon @ Юни 11 2005,14:58)

не можеш достав4ика ти ги назначава автоматично

E,dobre de tova kvo zna4i ,4e ne moga da polzvam neta prez Linux?

[neptun]

Е защо да не можеш.Азкато гледам имаш връзка.

A аз като гледам няма връзка '>
има некав проблем с пппоето чети  и пробвай.

[zeridon]

редовния проблем е че доставчика ползва pap вместо chap

тез адреси излизат като се пусне демона pppd
 не е разрешил да приеме техните адреси
тряба да има
noipdefault ipcp-accept-local ipcp-accept-remote
и освен туй DNS сървъра тряба да се зададе или да си пусне named на неговия компютър и да си търси от там имената.
Изобщо човека не казва ко е правил, най-вероятно нищо.

Цитат (Guest @ Юни 14 2005,00:41)

тез адреси излизат като се пусне демона pppd  не е разрешил да приеме техните адреси тряба да има noipdefault ipcp-accept-local ipcp-accept-remote и освен туй DNS сървъра тряба да се зададе или да си пусне named на неговия компютър и да си търси от там имената. Изобщо човека не казва ко е правил, най-вероятно нищо.

Примерен код

# pppoe.conf # # Configuration file for rp-pppoe.  Edit as appropriate and install in # /etc/ppp/pppoe.conf # # NOTE: This file is used by the adsl-start, adsl-stop, adsl-connect and #       adsl-status shell scripts.  It is *not* used in any way by the #       "pppoe" executable. # # Copyright (C) 2000 Roaring Penguin Software Inc. # # This file may be distributed under the terms of the GNU General # Public License. # # LIC: GPL # $Id: pppoe.conf,v 1.10 2002/04/09 17:28:38 dfs Exp $ #*********************************************************************** # When you configure a variable, DO NOT leave spaces around the "=" sign. # Ethernet card connected to ADSL modem ETH='eth0' # ADSL user name.  You may have to supply "@provider.com"  Sympatico # users in Canada do need to include "@sympatico.ca" # Sympatico uses PAP authentication.  Make sure /etc/ppp/pap-secrets # contains the right username/password combination. # For Magma, use [EMAIL=xxyyzz@magma.ca]xxyyzz@magma.ca[/EMAIL] USER='techo-vd' # Bring link up on demand?  Default is to leave link up all the time. # If you want the link to come up on demand, set DEMAND to a number indicating # the idle time after which the link is brought down. DEMAND=0 #DEMAND=300 # DNS type: SERVER=obtain from server; SPECIFY=use DNS1 and DNS2; # NOCHANGE=do not adjust. DNSTYPE=SPECIFY # Obtain DNS server addresses from the peer (recent versions of pppd only) # In old config files, this used to be called USEPEERDNS.  Changed to # PEERDNS for better Red Hat compatibility PEERDNS=no DNS1=84.238.147.3 DNS2=213.240.252.3 # Make the PPPoE connection your default route.  Set to # DEFAULTROUTE=no if you don't want this. DEFAULTROUTE=yes ### ONLY TOUCH THE FOLLOWING SETTINGS IF YOU'RE AN EXPERT # How long adsl-start waits for a new PPP interface to appear before # concluding something went wrong.  If you use 0, then adsl-start # exits immediately with a successful status and does not wait for the # link to come up.  Time is in seconds. # # WARNING WARNING WARNING: # # If you are using rp-pppoe on a physically-inaccessible host, set # CONNECT_TIMEOUT to 0.  This makes SURE that the machine keeps trying # to connect forever after adsl-start is called.  Otherwise, it will # give out after CONNECT_TIMEOUT seconds and will not attempt to # connect again, making it impossible to reach. CONNECT_TIMEOUT=30 # How often in seconds adsl-start polls to check if link is up CONNECT_POLL=2 # Specific desired AC Name ACNAME="united" # Specific desired service name SERVICENAME="internet" # Character to echo at each poll.  Use PING="" if you don't want # anything echoed PING="." # File where the adsl-connect script writes its process-ID. # Three files are actually used: #   $PIDFILE       contains PID of adsl-connect script #   $PIDFILE.pppoe contains PID of pppoe process #   $PIDFILE.pppd  contains PID of pppd process CF_BASE=`basename $CONFIG` PIDFILE="/var/run/$CF_BASE-adsl.pid" # Do you want to use synchronous PPP?  "yes" or "no".  "yes" is much # easier on CPU usage, but may not work for you.  It is safer to use # "no", but you may want to experiment with "yes".  "yes" is generally # safe on Linux machines with the n_hdlc line discipline; unsafe on others. SYNCHRONOUS=no # Do you want to clamp the MSS?  Here's how to decide: # - If you have only a SINGLE computer connected to the ADSL modem, choose #   "no". # - If you have a computer acting as a gateway for a LAN, choose "1412". #   The setting of 1412 is safe for either setup, but uses slightly more #   CPU power. CLAMPMSS=1412 #CLAMPMSS=no # LCP echo interval and failure count. LCP_INTERVAL=20 LCP_FAILURE=3 # PPPOE_TIMEOUT should be about 4*LCP_INTERVAL PPPOE_TIMEOUT=80 # Firewalling: One of NONE, STANDALONE or MASQUERADE FIREWALL=NONE # Linux kernel-mode plugin for pppd.  If you want to try the kernel-mode # plugin, use LINUX_PLUGIN=/etc/ppp/plugins/rp-pppoe.so LINUX_PLUGIN= # Any extra arguments to pass to pppoe.  Normally, use a blank string # like this: PPPOE_EXTRA="" # Rumour has it that "Citizen's Communications" with a 3Com # HomeConnect ADSL Modem DualLink requires these extra options: # PPPOE_EXTRA="-f 3c12:3c13 -S ISP" # Any extra arguments to pass to pppd.  Normally, use a blank string # like this: PPPD_EXTRA="" ########## DON'T CHANGE BELOW UNLESS YOU KNOW WHAT YOU ARE DOING # If you wish to COMPLETELY overrride the pppd invocation: # Example: # OVERRIDE_PPPD_COMMAND="pppd call dsl" # If you want adsl-connect to exit when connection drops: # RETRY_ON_FAILURE=no

Цитат (zeridon @ Юни 13 2005,17:47)

редовния проблем е че доставчика ползва pap вместо chap

Примерен код

Device Name  -  WAN Miniport(PPPOE) Device Type  -  PPPoE Server type  -  PPP Transports   -  TCP/IP Authentication -MS CHAP V2 Compression  -  (none) PPP multilink framing -Off Server IP address -'>.'>.'>.'> Client IP address -'>.'>.'>.'>

/etc/ppp/options

Цитат (Guest @ Юни 14 2005,13:00)

/etc/ppp/options

Примерен код

UNLOCK

я си ползвай уиндоуса

Цитат (Guest @ Юни 14 2005,18:20)

я си ползвай уиндоуса

Mersi za suveta...no ti pokazvam kakvo ima v OPTIONS file...

[techobg]

Цитат (Guest @ Юни 14 2005,18:20)

я си ползвай уиндоуса

Ще помагаш ли или кво...и пиши малко повече,а не само с една две думи да отговаряш...знаеш как е ,почвам от нулата...!
И все пак ми помагаш!!!

пробвай да сложиш и тия неща
 
noipdefault
ipcp-accept-local
ipcp-accept-remote